Search Results

Real time knowledge of the metabolic workload of an astronaut during an Extra-Vehicular Activity (EVA) can be instrumental for space suit research, design, and operation. Three indirect calorimetry approaches were developed to determine the metabolic workload of a subject in an open-loop space suit analogue. A study was conducted to compare the data obtained from three sensors: oxygen, carbon dioxide, and heart rate. Subjects performed treadmill exercise in an enclosed helmet assembly, which simulated the contained environment of a space suit while retaining arm and leg mobility. These results were validated against a standard system used by exercise physiologists. The carbon dioxide sensor method was shown to be the most reliable and a calibrated version of it will be integrated into the MX-2 neutral buoyancy space suit analogue.

The fit of a spacesuit has been identified as a crucial factor that will determine its usability. Therefore, because one-size-fits-all spacesuits seldom fit any wearer well, and because individually tailored spacesuits are costly, the University of Maryland has conducted research into a resizable Extravehicular Activity (EVA) suit. This resizing is accomplished through a series of cable-driven parallel manipulators, which are used to adjust the distance between plates and rings built into a soft space suit. These actuators, as well as enabling passive suit resizing, could be used to actively assist the astronaut's motion, decreasing the torques that must be applied for movement in a pressurized suit. This paper details the development and testing of an arm prototype, which is used to better understand the dynamics of a more complex torso-limb system.

The research discussed in this paper demonstrates further advancements in the concept of a Morphing Upper Torso, which incorporates robotic elements within the pressure suit design to enable a resizable, highly mobile and easy to donn/doff spacesuit. A full scale experimental model has been made, which accompanies several analytical models. The Jacobian matrix for the robotic system, which multiplies the total twist vector of the system to yield the vector of actuator velocities, is derived. This dynamic analysis enables quantification of the dynamic actuator requirements, given demanded trajectories of the rings. A motion capture pilot study was done to develop a methodology to obtain measurements of suit movement and hence the ring trajectories. Subjects performed various tasks that a suited astronaut may perform on a planetary surface, while wearing a torso mockup within the motion capture system.

The hybrid elastic design is based upon an American Society for Engineering Education (ASEE) glove designed by at the Space Systems Laboratory (SSL) in 1985. This design uses an elastic restraint layer instead of convolute joints to achieve greater dexterity and mobility during EVA (extravehicular activity). Two pilot studies and a main study were conducted using the hybrid elastic glove and a 4000-series EMU (extravehicular activity unit) glove. Data on dexterity performance, joint range of motion, grip strength and perceived exertion was assessed for the EMU and hybrid elastic gloves with correlations to a barehanded condition. During this study, 30 test subjects performed multiple test sessions using a hybrid elastic glove and a 4000-series shuttle glove in a 4.3psid pressure environment. Test results to date indicate that the hybrid elastic glove performance is approximately similar to the performance of the 4000-series glove.

A fully operational space suit analogue for use in a neutral buoyancy environment has been developed and tested by the University of Maryland’s Space Systems Laboratory. Repeated manned operations in the Neutral Buoyancy Research Facility have shown the MX-2 suit analogue to be a realistic simulation of operational EVA pressure suits. The suit is routinely used for EVA simulation, providing reasonable joint restrictions, work envelopes, and visual and audio environments comparable to those of current EVA suits. Improved gloves and boots, communications carrier assembly, in-suit drink bag and harness system have furthered the semblance to EVA. Advanced resizing and ballasting systems have enabled subjects ranging in height from 5′8″ to 6′3″ and within a range of 120 lbs to obtain experience in the suit. Furthermore, integral suit instrumentation facilitates monitoring and collection of critical data on both the suit and the subject.

The Ranger Telerobotic Flight Experiment is a highly complex teleoperated spacecraft, requiring direct human control of 36 major degrees of freedom. The University of Maryland Space Systems Laboratory and the NASA Ames Research Center are cooperating on the development of a virtual reality control station to streamline human interfaces with the Ranger spacecraft. This describes the design and integration of the Ranger Command Chair, a system incorporating fully immersive helmet-mounted stereo displays with head tracking, hand tracking for direct positional control, and supplemental controls and displays to allow a single operator to functionally control the entire vehicle. This system is currently undergoing tests with the Ranger Neutral Buoyancy Vehicle, a functionally identical vehicle used for systems development and flight operations simulations.

The University of Maryland Space Systems Laboratory has developed a system that replicates some limited aspects of pressure suits to facilitate neutral buoyancy research into EVA bioinstrumentation, advanced EVA training, and EVA/robotic interactions. After a two year upgrade from its MX-1 predecessor, the MX-2 space suit analogue is currently undergoing a variety of system integration tests in preparation for initial operational testing, leading to routine use for EVA simulation and as a testbed for advanced space suit technology. The MX-2 is built around a hard upper torso with integrated hemispherical helmet and rear-entry hatch. Three-layer soft-goods are used for the arms and lower torso, while an open loop air system regulates suit pressure to 3 psid. Wrist disconnects allow the use of standard EMU or Orlan gloves, or experimental gloves such as the mechanical counterpressure gloves and power-assisted gloves developed previously by the SSL.

The Maryland Advanced Research/Simulation (MARS) Suit is designed to be a low-cost test bed for extravehicular activity (EVA) research, providing an environment for the development and application of biomedical sensors and advanced EVA technologies. It is also designed to be used in gaining more experience with human-telerobotic interactions in an integrated EVA worksite. This paper details the first generation MARS Suit (MX-1) design, describes the low-cost development process, and presents results from ongoing suit testing, as well as plans for future work.