Search Results

These days many research efforts on internal combustion engines are centred on optimising turbocharger matching and performance on the engine. In the last years a number of studies have pointed out the strong effect on turbocharger behaviour of heat transfer phenomena. The main difficulty for taking into account these phenomena comes from the little information provided by turbocharger manufacturers. In this background, Original Engine Manufacturers (OEM) need general engineering tools able to provide reasonably precise results in predicting the mentioned heat transfer phenomena. Therefore, the purpose of this work is to provide a procedure, applicable to small automotive turbochargers, able to predict the heat transfer characteristics that can be used in a lumped 1D turbocharger heat transfer model. This model must be suitable to work coupled to whole-engine simulation codes (such as GT-Power or Ricardo WAVE) for being used in global engine models by the OEM.

Nowadays turbocharging the internal combustion engine has become a key point in both the reduction of pollutant emissions and the improvement of engine performance. The matching between turbocharger and engine is difficult; some of the reasons are the highly unsteady flow and the variety of diabatic and off-design conditions the turbocharger works with. In present paper the importance of the heat transfer phenomena inside small automotive turbochargers will be analyzed. These phenomena will be studied from the point of view of internal heat transfer between turbine and compressor and with a one-dimensional approach. A series of tests in a gas stand, with steady and pulsating hot flow in the turbine side, will be modeled to show the good agreement in turbocharger enthalpies prediction. The goodness of the model will be also shown predicting turbine and compressor outlet temperatures.

The combination of more strict regulation for pollutant and CO2 emissions and the new testing cycles, covering a wider range of transient conditions, makes very interesting the development of predictive tools for engine design and pre-calibration. This paper describes a new integrated Virtual Engine Model (VEMOD) that has been developed as a standalone tool to simulate new standard testing cycles. The VEMOD is based on a wave-action model that carries out the thermo-and fluid dynamics calculation of the gas in each part of the engine. In the model, the engine is represented by means of 1D ducts, while the volumes, such as cylinders and reservoirs, are considered as 0D elements. Different sub-models are included in the VEMOD to take into account all the relevant phenomena. Thus, the combustion process is calculated by the Apparent Combustion Time (ACT) 1D model, responsible for the prediction of the rate of heat release and NOx formation.