Search Results

Suspension plays an essential role in vehicle's handling stability and riding comfort. This paper discusses a novel suspension that has the capacity to trace a straight line in theory. Therefore it is called rectilinear suspension. So the alignment parameters are invariable during jounce and rebound if the elasticity of suspension components is ignored. According to the structure characteristics of the rectilinear suspension, it is suitable to mount on the rear axle. To evaluate its performance, the dynamics model is established through ADAMS. Moreover, a comparison of the rectilinear suspension with the twin-trapezoidal link suspension is carried out. Further, the K&C test results show that the alignment parameters of the rectilinear suspension are almost invariable compared with MacPherson suspension.

Faced with the need to reduce development time and cost, the hardware-in-the-loop simulation increasingly proves to be an efficient tool in the development of automotive engine control system. In this article, the rapid prototyping technology is used to develop a hardware-in-the-loop simulation system for the diesel engine electronic control unit development. The hardware-in-the-loop simulation presented in this paper is based on Linux RTAI system, an open source hard real-time extension of the Linux Operating System, at low costs and within industrial standards. It exploits standard x86-based computing platforms provided with real-time Linux software in combination with generic computer-aided design software (Matlab/Simulink). One of its main characteristics is that it can automatically generate the real-time simulation code for many target processors, which runs under Linux RTAI operating system.

Active steering systems can help the driver to master critical driving situations. This paper presents a fuzzy logic control strategy on active steering vehicle based on a multi-body vehicle dynamic model. The multi-body vehicle dynamic model using ADAMS can accurately predict the dynamic performance of the vehicle. A new hybrid steering scheme including both active front steering (applying an additional front steering angle besides the driver input) and rear steering is presented to control both yaw velocity and sideslip angle. A set of fuzzy logic rules is designed for the active steering controller, and the fuzzy controller can adjust both sideslip angle and yaw velocity through the co-simulation between ADAMS and the Matlab fuzzy control unit with the optimized membership function. To ensure the design of high-quality fuzzy control rules, a rule optimization strategy is introduced.

Chassis platform is usually supplied for several types of cars which have their individual requirement for handling stability and ride comfort. Therefore the stiffness, damping and the dimension of the guide mechanism of the suspension have to be adjusted to meet the different performance requirements of different styles of cars. In this paper a module exclusively used for handling stability analysis of chassis platform is developed based on ADAMS/Car. With this module chassis engineers can easily adjust the parameters of suspension such as stiffness, damping and locations of hard points to match the front and rear suspension suitably and then predict and optimize the performance of the suspension system. Therefore different types of cars that using chassis platform can fulfill their own handling stability and ride comfort requirements.

This paper introduces a vehicle model in CarSim, and replaces a portion of its standard suspension system with an HIS model built in an external software to implement co-simulations. The maneuver we employ to characterize the HIS vehicle is a constant radius method, i.e. observing the vehicle’s steering wheel angle by fixing its cornering radius and gradually increasing its longitudinal speed. The principles of the influence of HIS systems on cornering mainly focus on two factors: lateral load transfer and roll steer effect. The concept of the front lateral load transfer occupancy ratio (FLTOR) is proposed to evaluate the proportions of lateral load transfer at front and rear axles. The relationship between toe and suspension compression is dismissed firstly to demonstrate the effects of lateral load transfer and then introduced to illustrate the effects of roll motion on cornering.

The current paper proposes a hydraulic interconnected suspension system (HIS) based on a hydraulic energy-regenerative shock absorber (HESA) comparatively with the passive suspensions. The structure and working principles of the HIS system are introduced in order to investigate the damping performance and energy regeneration characteristics of the proposed system. Then, the dynamic characteristics of the HIS-HESA system have been investigated based on a 4-DOF longitudinal half vehicle model. In the simulation, two different road inputs were used in the dynamic characterization of the HIS-HESA; the warp sinusoidal excitation, and the random road signal. In addition, a comparative analysis was provided for the dynamic responses of the half vehicle model for both the HIS-HESA and the conventional suspension. Furthermore, a parametric analysis of the HIS-HESA has been carried out highlining the key parameters that have a remarkable effect on the HIS-HESA performance.

The automotive industry is evolving towards Electrified Vehicles (EV) in the recent years. Compared to the traditional ICE vehicles, tire noise induced by the tire-road interaction, is no longer masked by the internal combustion engine, and therefore becomes one of the most dominant sources of noise within the cabin and acoustic emission perceived by by-standers. Robust source characterization is one of the most important tasks for road noise prediction. The receiver-independent tire blocked forces are often used as ire-road source characteristics, which can be applied to any test-based or FE-based vehicle model to obtain the interior noise. They can be inversely identified from measurements on a tire test rig or on an in-situ vehicle. However, this inverse process needs to be repeated for different tires, roads and rolling speeds, which can become time-consuming and expensive.

To integrate the energy-recovery characteristic of the Hydraulic electromagnetic shock absorber (HESA) and the anti-roll characteristic and anti-pitch characteristic of Hydraulic Interconnected Suspension(HIS), a Hydraulic Interconnected Suspension system based on Hydraulic Electromagnetic Shock Absorber (HESA-HIS) is presented. HESA-HIS has three operating modes: energy-recovery priority mode, dynamic performance priority mode and energy-recovery and dynamic performance balance mode. The working principle of HESA-HIS in the three operating modes is introduced, a full vehicle model is built by using the software AMESim, and some simulation tests are conducted by using the vehicle model. The simulation results show that the system can effectively reduce the roll angle of the vehicle, while maintaining good ride performance. Fishhook test results show that the roll angle of the HESA-HIS vehicle is reduced by 80%, compared to the traditional vehicle.

Hydraulic suspension systems with different interconnected configurations can decouple suspension mode and improve performance of a particular mode. In this paper, two types of interconnected suspensions are compared for off-road vehicle trafficability. Traditionally, anti-roll bar, a mechanically interconnected suspension system, connecting left and right suspension, decouples roll mode from the bounce mode and results in a stiff roll mode and a soft bounce mode, which is desired. However, anti-roll bars fail to connect the front wheel motions with the rear wheels', thus the wheels' motions in the warp mode are affected by anti-roll bars and it results an undesired stiffened warp mode. A stiffened warp mode limits the wheel-ground contact and may cause one wheel lift up especially during off-road drive. In contrast with anti-roll bars, two types of hydraulic suspensions which interconnect four wheels (for two-axis vehicles) can further decouple articulation mode from other modes.

Air spring due to its superior ride comfort performance has been widely used in distance passenger transporting vehicles. Since the requirements for ride comfort and handling performance are contradict to each other, handling performance and even roll stability are sacrificed to some extent to obtain good ride comfort. Due to the complex terrain and limited manufacturing level, in the past several years, bus rollover accidents with serious casualties have been reported frequently and bus safety has attracted more and more attention from bus manufacturers in China. On one hand the bus standards have to be raised, and on the other hand, novel solutions which can effectively improve the roll stability of air spring bus are needed to replace the inadequacy of anti-roll bars.