Refine Your Search

Date

Date

Topic

Topic

Control systems Vehicle E E System Diagnostic Standards Committee Tools and equipment

Search Results

Viewing 1 to 20 of 35
12Next >Last >>
Sort by published
Standard

Enhanced E/E Diagnostic Test Modes
2008-10-02
CURRENT
J2190_200810
This SAE Recommended Practice describes the implementation of Enhanced Diagnostic Test Modes, which are intended to supplement the legislated Diagnostic Test Modes defined in SAE J1979. Modes are defined for access to emission related test data beyond what is included in SAE J1979, and for non-emission related data. This document describes the data byte values for diagnostic messages transmitted between diagnostic test equipment, either on-vehicle or off-vehicle, and vehicle electronic control modules. No distinction is made between test modes for emission related and non-emission related diagnostics. These messages can be used with a diagnostic serial data link such as described in SAE J1850 or ISO 9141-2. For each test mode, this document includes a functional description of the test mode, request and report message data byte content, and an example if useful for clarification.
Standard

UNIVERSAL INTERFACE FOR OBD II SCAN
1993-06-01
HISTORICAL
J2201_199306
SAE J1978 defines the requirements of the OBD II scan tool. SAE J2201 defines the minimum requirements of the vehicle communications interface for the SAE J1978 OBD II scan tool. This interface connects the SAE J1962 test equipment connector to the hardware/software of the SAE J1978 OBD II scan tool that will use this interface to communicate with vehicles for the purpose of accessing required OBD II functions. Included in this SAE Recommended Practice are several definitions relating to the interface, and interface functionality evaluation. Appendix A - Examples include several example interface circuit implementations, which are believed to meet the requirements of this document and of SAE J1978. These examples are NOT requirements of this document. They are provided to assist circuit designers in developing interface circuits. Appendix B - Supporting Documents includes a list of supporting documents for the examples shown in Appendix A.
Standard

E/E Data Link Security
2019-07-12
CURRENT
J2186_201907
This SAE Recommended Practice establishes a uniform practice for protecting vehicle components from "unauthorized" access through a vehicle data link connector (DLC). The document defines a security system for motor vehicle and tool manufacturers. It will provide flexibility to tailor systems to the security needs of the vehicle manufacturer. The vehicle modules addressed are those that are capable of having solid state memory contents accessed or altered through the data link connector. Improper memory content alteration could potentially damage the electronics or other vehicle modules; risk the vehicle compliance to government legislated requirements; or risk the vehicle manufacturer's security interests. This document does not imply that other security measures are not required nor possible.
Standard

E/E Data Link Security
2005-06-27
HISTORICAL
J2186_200506
This SAE Recommended Practice establishes a uniform practice for protecting vehicle components from "unauthorized" access through a vehicle data link connector (DLC). The document defines a security system for motor vehicle and tool manufacturers. It will provide flexibility to tailor systems to the security needs of the vehicle manufacturer. The vehicle modules addressed are those that are capable of having solid state memory contents accessed or altered through the data link connector. Improper memory content alteration could potentially damage the electronics or other vehicle modules; risk the vehicle compliance to government legislated requirements; or risk the vehicle manufacturer's security interests. This document does not imply that other security measures are not required nor possible.
Standard

E/E DATA LINK SECURITY
1996-10-01
HISTORICAL
J2186_199610
This SAE Recommended Practice establishes a uniform practice for protecting vehicle components from "unauthorized" access through a vehicle data link connector (DLC). The document defines a security system for motor vehicle and tool manufacturers. It will provide flexibility to tailor systems to the security needs of the vehicle manufacturer. The vehicle modules addressed are those that are capable of having solid state memory contents accessed or altered through the data link connector. Improper memory content alteration could potentially damage the electronics or other vehicle modules; risk the vehicle compliance to government legislated requirements; or risk the vehicle manufacturer's security interests. This document does not imply that other security measures are not required nor possible.
Standard

E/E DATA LINK SECURITY
1991-09-16
HISTORICAL
J2186_199109
This SAE Recommended Practice establishes a uniform practice for protecting vehicle modules from "unauthorized" intrusion through a vehicle diagnostic data communication link. The security system represents a recommendation for motor vehicle manufacturers and provides flexibility for them to tailor their system to their specific needs. The vehicle modules addressed are those that are capable of having solid-state memory contents altered external to the electronic module through a diagnostic data communication link. Improper memory content alteration could potentially damage the electronics or other vehicle modules; risk the vehicle compliance to government legislated requirements; or risk the vehicle manufacturer's security interests. This document is intended to meet the "tampering protection" provisions of California Air Resources Board OBD II regulations and does not imply that other security measures are not required nor possible.
Standard

SAE J1850 Verification Test Procedures
2006-06-05
HISTORICAL
J1699/1_200606
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using the SAE J1850. This document only verifies the portion of SAE J1850 that is used for OBD-II communications. The term “test tool” is synonymous with OBD-II Scan tool.
Standard

OBD-II Related SAE Specification Verification Test Procedures1
1998-01-01
HISTORICAL
J1699/2_199801
This SAE Recommended Practice recommends test methods, test procedures, and specific test parameters to help verify that vehicles and test tools can communicate using SAE J1962. These test procedures are to be used whenever SAE J1850 communication parameters need to be verified. However, all specific details for testing are not specified, e.g., sample size, environment, vibration, etc.
Standard

DIAGNOSTIC CONNECTOR
1994-06-01
HISTORICAL
J1962_199406
The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector (see Figure 1) and the test equipment connector (see Figure 2). This document: a Defines the functional requirements for the vehicle connector. These functional requirements are separated into three principal areas: connector location/access, connector design, and connector terminal assignments. b Defines the functional requirements for the test equipment connector. These functional requirements are separated into two principal areas: connector design and connector terminal assignments. The scope of this document does not include the needs of long-term retention, such as in-flight recorder type applications. To ensure long-term retention, additional steps outside of the scope of this document must be taken.
Standard

DIAGNOSTIC CONNECTOR
1993-06-01
HISTORICAL
J1962_199306
The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector (see Figure 1) and the test equipment connector (see Figure 2). This document: a Defines the functional requirements for the vehicle connector. These functional requirements are separated into three principal areas: connector location/access, connector design, and connector terminal assignments. b Defines the functional requirements for the test equipment connector. These functional requirements are separated into two principal areas: connector design and connector terminal assignments.
Standard

DIAGNOSTIC CONNECTOR
1995-01-01
HISTORICAL
J1962_199501
The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector (see Figure 1) and the test equipment connector (see Figure 2). This document: a Defines the functional requirements for the vehicle connector. These functional requirements are separated into three principal areas: connector location/access, connector design, and connector terminal assignments. b Defines the functional requirements for the test equipment connector. These functional requirements are separated into two principal areas: connector design and connector terminal assignments. The scope of this document does not include the needs of long-term retention, such as in-flight recorder type applications. To ensure long-term retention, additional steps outside of the scope of this document must be taken.
Standard

DIAGNOSTIC CONNECTOR
1998-02-01
HISTORICAL
J1962_199802
The SAE J1962 diagnostic connector consists of two mating connectors, the vehicle connector (see Figure 1) and the test equipment connector (see Figure 2). This document: a Defines the functional requirements for the vehicle connector. These functional requirements are separated into four principal areas: connector location/access, connector design, connector terminal assignments, and connector electrical interface requirements. b Defines the functional requirements for the test equipment connector. These functional requirements are separated into three principal areas: connector design, connector terminal assignments, and connector electrical interface requirements. The scope of this document does not include the needs of long-term retention, such as in-flight recorder type applications. To ensure long-term retention, additional steps outside of the scope of this document must be taken.
Standard

OBD-II Scan Tool: First Generation Protocols
2023-12-13
CURRENT
J1978-1_202312
SAE J1978-1 specifies a complementary set of functions to be provided by an OBD-II scan tool. These functions provide complete, efficient, and safe access to all regulated OBD (on-board diagnostic) services on any vehicle which complies to SAE J1978-1 The SAE J1978-1 content of this document is intended to satisfy the requirements of an OBD-II scan tool as required by current U.S. on-board diagnostic (OBD) regulations. This document specifies: A means of establishing communications between an OBD-equipped vehicle and an OBD-II scan tool. A set of diagnostic services to be provided by an OBD-II scan tool in order to exercise the services defined in SAE J1979 and SAE J1979-2. The presentation of the SAE J1978 document family, where SAE J1978-1 covers first generation protocol functionality defined in SAE J1979, and SAE J1978-2 covers second generation protocol functionality defined in SAE J1979-2.
Standard

E/E Diagnostic Test Modes
2014-08-11
HISTORICAL
J1979_201408
This document supersedes SAE J1979 May 2007, and is technically equivalent to ISO 15031-5 2010, with the addition of new capabilities required by revised regulations from the California Air Resources Board and revised regulations from the European Commission. This document is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future.
12Next >Last >>
X