Refine Your Search

Date

Date

Topic

Topic

Article Turbojet engines Spacecraft Thermodynamics Materials properties Exhaust emissions

Search Results

Viewing 1 to 20 of 111
123Next >Last >>
Sort by published
Article

Northrop Grumman awarded $792 Million to deliver intermediate and heavy versions of OmegaA space launch vehicle
2018-10-12
Northrop Grumman Corporation of Falls Church, Va. received a Launch Services Agreement (LSA) worth approximately $792 million of government investment from the United States Air Force (USAF) Space and Missile Systems Center to continue development of its OmegA rocket for the Evolved Expendable Launch Vehicle (EELV) program. The agreement runs through 2024 and includes certification flights of OmegA’s intermediate variant in 2021 and its heavy variant in 2024.
Article

Iridium, Aireon, SpaceX celebrate satellite launch, system deployment
2018-07-26
A SpaceX Falcon 9 rocket lifted off from Vandenberg Air Force Base, Calif., at 04:39:30 a.m. Pacific Daylight Time (PDT) on July 25, 2018 and placed 10 new Iridium NEXT satellites into low Earth orbit (LEO), bringing the total number of Aireon space-based Automatic Dependent Surveillance-Broadcast (ADS-B) payloads in orbit to 65 as global air traffic surveillance service nears debut and satellite constellation nears completion.
Article

NASA selects Frontier Aerospace to continue development of new deep space thruster
2018-08-24
NASA’s Space Technology and Mission Directorate awarded Frontier Aerospace with “Tipping Point” funding to qualify Frontier’s Deep Space Engine (DSE) for flight. The compact and lightweight design of the 100-pound force DSE thruster will enable future development of smaller and less expensive spacecraft propulsion systems due to the lower temperature freezing characteristics of its particular propellant.
Article

Five-satellite MUOS constellation to deliver secure, next-gen SATCOM on battlefield
2018-08-06
U.S. Strategic Command (USSTRATCOM) at Offutt Air Force Base, Neb., has approved the U.S. Navy’s next-generation narrowband satellite communication (SATCOM) system for expanded operational use, paving the way for Navy and Marine Corps early-adopter commands to use the system on deployment as early as this fall, primarily in the Pacific theater.
Article

NASA invests in aerospace start-up, university projects on CubeSat platform
2018-08-01
NASA Science Mission Directorate officials in Washington are funding three new projects selected from a pool of 25 received in response to the NASA Earth Science Technology Office’s (ESTO’s) solicitation for the In-Space Validation of Earth Science Technologies (InVEST) program element A.49 of ROSES (Research Opportunities in Space and Earth Sciences) 2017, supporting the Earth Science Division (Solicitation NNH17ZDA001N).
Article

SAE International
2018-04-13
In March, a new demonstrator engine by Rolls-Royce, featuring a cutting-edge lean-burn and low-emissions combustion system for future jet engine programs, began icing tests at the Global Aerospace Centre for Icing and Environmental Research in Manitoba, Canada.
Article

Bye Aerospace’s solar-electric prototype completes first flight
2018-08-29
Bye Aerospace completed the first flight of its solar electric technology demonstrator prototype. The first flight – on August 20 – and subsequent flight tests occurred at Northern Colorado Regional Airport and will provide crucial flight data required for the development of Bye Aerospace’s “StratoAirNet” and “Solesa” families of medium-altitude aircraft systems.
Article

Aerospace & defense systems engineering undergoes digital transformation with MBSE
2018-10-16
A growing number of organizations, including leading aerospace and defense (A&D) companies, are implementing model-based systems engineering (MBSE), a practice developing and exploiting a set of related system models that help define, design, and document a system under development – and reaping the benefits of not only increased productivity, agility, and efficiency, but also time and cost savings.
Article

FADA-CATEC uses 3D printing to slim down the CHEOPS satellite
2018-12-06
The Center for Advanced Aerospace Technologies (FADA-CATEC) has collaborated with the Spanish engineering company CiTD in the design, development, and manufacture of new aerospace components through 3D printing for the European Space Agency CHEOPS satellite.
Article

Final Orion capsule parachute system test successful
2018-09-28
A team of engineers from NASA and Dallas-based Jacobs Engineering Group Inc. successfully completed the eighth and final test of the Orion spacecraft Capsule Parachute Assembly System at the U.S. Army Yuma Proving Ground in Yuma, Ariz.
Article

Demand up for composite-grade, high-performance plastics across aerospace, automotive
2018-08-23
Demand for high-performance plastics (HPPs) is up across the aerospace industry, driven by such key trends as growing performance requirements, increased use of additive manufacturing or 3D printing, supply chain globalization, and tightening environmental regulations. Growing passenger traffic coupled with the need to reduce emissions – being accomplished through lightweighting, engine downsizing, and vehicle electrification – present opportunities for HPPs, research analysts at Frost & Sullivan in San Antonio, Texas, explain.
Article

“The Eagle has landed”
2018-10-08
Lockheed Martin has revealed its concept for a new crewed lunar lander: a single stage, fully reusable system that incorporates flight-proven technologies and systems from the NASA Orion spacecraft. In its initial configuration, the lander would deliver a crew of four and 2,000 pounds of cargo to the Moon’s surface for up to two weeks.
Article

JAXA launches HTV7 unmanned cargo spacecraft on resupply mission to ISS
2018-09-25
The Japan Aerospace Exploration Agency (JAXA) H-IIB Launch Vehicle No. 7 lifted off from the Tanegashima Space Center in Japan at 2:54:27 Japan Standard Time (JST) on September 23, carrying the KOUNOTORI7 (HTV7) cargo transporter into orbit to start its journey to the International Space Station (ISS).
Article

Three stages of separation: bidding farewell to the Delta II launch vehicle
2018-09-14
The upcoming launch of the NASA ICESat-2 will be the last liftoff for the Delta II rocket, whose reliability made it a mainstay for civil, military, and commercial space customers. The medium-lift Delta II is manufactured by United Launch Alliance (ULA), a joint venture between Lockheed Martin Space Systems and Boeing Defense, Space & Security, and features main and upper-stage engines supplied by Aerojet Rocketdyne of Sacramento, Calif.
Article

Northrop Grumman completes first live motor cast for OmegA rocket
2018-09-06
Northrop Grumman has successfully completed casting, or filling with solid propellant, the first live motor segment for its new OmegA rocket. The segment, developed as a part of the Northrop Grumman Innovation Systems’ Common Boost Segment (CBS) program, is specifically designed to support the needs of the OmegA intermediate- to heavy-lift rocket, soon to be the largest and most capable in the company’s line-up.
Article

Delta II’s final flight a success
2018-09-17
The United Launch Alliance (ULA) Delta II rocket carrying NASA’s Ice, Cloud and land Elevation Satellite-2 (ICESat-2) spacecraft lifted off from Space Launch Complex-2 at Vandenberg Air Force Base, Calif. on Sept. 15 at 6:02 a.m. PDT., marking the 155th launch and the final mission of the Delta II rocket, which first launched on Feb. 14, 1989.
Article

JAXA MINERVA-II1 rovers achieve asteroid landing, autonomy, image and data capture
2018-09-24
Japan Aerospace Exploration Agency (JAXA) officials have released the first images from two unmanned rovers that landed safely on the surface of asteroid Ryugu just days ago. The compact MINERVA-II1 rovers, Rover-1A and Rover-1B, separated from the Hayabusa2 spacecraft on Sept. 21 at 13:06 Japan Standard Time (JST) and landed on Ryugu with a bounce.
123Next >Last >>
X