Search Results

This paper presents an overview of the design and operation of the internal thermal control system (ITCS) developed for Space Station Freedom by the NASA-Johnson Space Center and McDonnell Douglas Aerospace to provide cooling for the resource nodes, airlock, and pressurized logistics modules. The ITCS collects, transports, and rejects waste heat from these modules by a dual-loop, single-phase water cooling system. ITCS performance, cooling, and flow rate requirements are presented. An ITCS fluid schematic is shown and an overview of the current baseline system design and its operation is presented. Assembly sequence of the ITCS is explained as its configuration develops from Man Tended Capability (MTC), for which node 2 alone is cooled, to Permanently Manned Capability (PMC) where the airlock, a pressurized logistics module, and node 1 are cooled, in addition to node 2.

The Space Constructible Radiator (SCR) Life Test heat pipe performance testing is currently conducted at NASA/Johnson Space Center as part of the Advanced Technology Development Program. The SCR is a dual passage, monogroove heat pipe radiator designed and manufactured by Grumman Aerospace for NASA. The heat pipe has many aerospace applications since it can transport a large amount of heat with a compact lightweight design. As the micro-meteoroid/orbital debris environment worsens, it may be advantageous to add the heat pipe radiator to the Space Station's thermal control system. The SCR Life Test has been operating over the last 10 years and will continue until the year 2000. The overall heat transfer coefficient has decreased from 792 W/K (1500 Btu/Hr-°F) to 475 W/K (900 Btu/Hr-°F) but appears to have stabilized. This paper summarizes the SCR Life Test setup and the test results to date.

This paper defines the value of free-flying cameras to the Space Station. The use of free-flying cameras is an alternative to reliance on fixed cameras. The analysis is based upon results from recent neutral buoyancy evaluations of a free-flying camera known as the Supplemental Camera and Maneuvering Platform (SCAMP). SCAMP was evaluated for inspection and viewing capabilities that will be required by Space Station. Test results demonstrated that a free-flying camera could be used effectively for inspecting structure, viewing labels, providing views for control of extravehicular robotics (EVR) and for ground assistance during extravehicular activity (EVA) tasks.

The objective of this paper is to present results of MDA's payload vibration isolation system research and development program. A unique isolation system with passive or active capabilities designed to provide isolation down to 10-6 g was developed and tested in our 1-g testbed under simulated microgravity conditions. Fluid and electrical umbilicals are also included in the system. The established isolation system performance requirements were met and the testbed data were used to refine our analytical models for predicting flight performance. Simulations using an updated Space Station configuration showed that the payload microgravity requirement can be met by upgrading the hardware from laboratory to flight tolerances and improving the control system design. The next step is to flight test the systems verified in 1 g on the STS/SPACEHAB using a middeck locker size development unit.

The successes of the long-duration MDA/NASA test programs for advanced life-support systems conducted prior to 1971 were highly dependent on the selection and training of both the test crews that remained inside the test chamber throughout the test periods and the outside operating staff. The operating staff was responsible for overall test performance, crew safety monitoring, operation and maintenance of the test facilities, and collection and maintenance of data. A selection, training, and certification program was developed and performed to ensure operating staff members had the correct technical skills and could work effectively together with the inside crew. A training program was designed to ensure that each selected operating staff member was capable of performing all assigned functions and was sufficiently cross-trained to serve at other positions on a contingency basis, if needed.

Tactical aircraft have tire lives as low as 3-5 landings per tire causing excessive support costs. The goal of the Improved Tire Life (ITL) program was to begin developing technology to double aircraft tire life, particularly for tactical aircraft. ITL examined not only the tire, but also aircraft/landing gear design, aircraft operations, and the operational environment. ITL had three main thrusts which were successfully accomplished: 1) development of an analytical tire wear model, 2) initiation of technology development to increase tire life, and 3) exploration of new and unique testing methods for tire wear. This paper reports the work performed and the results of the USAF sponsored ITL program.

The KEEP EAGLE flight test program was conducted from August 1994 until August 1995 at Edwards AFB by a combined government/contractor test team to evaluate improvements to F-15E high angle-of-attack and spin recovery characteristics. This paper will trace the program from its inception in 1992 until conclusion in 1995, with emphasis on the test approach and flight test techniques employed for this high risk program. Specifically, the test approach included novel assessments of spin recovery control power early in the flight test program using controlled build-ups in yaw rate. The program also used simulation effectively to improve test efficiency and maintain test team proficiency with normal and emergency procedures. These techniques allowed a relatively aggressive flight test program without compromising safety. A total of 18 different aircraft configurations were successfully tested, with 146 developed spins completed throughout the course of 81 program flights.