Search Results

The performance of a more-electric aircraft (MEA) power system electrical accumulator unit (EAU) architecture consisting of a 57000 rpm induction machine (IM) coupled to a controllable shaft load and controlled using direct torque control (DTC) is examined through transient modeling and simulation. The simplicity and extremely fast dynamic torque response of DTC make it an attractive choice for this application. Additionally, the key components required for this EAU system may already exist on certain MEA, therefore allowing the benefits of EAU technology in the power system without incurring a significant weight penalty. Simulation results indicate that this architecture is capable of quickly tracking system bus power steps from full regenerative events to peak load events while maintaining the IM's speed within 5% of its nominal value.

Efforts are underway to develop technologies to create a more Energy Optimized Aircraft (EOA). The question becomes how should one define an Energy Optimized Aircraft and how should energy optimization be measured to determine what is optimal? This paper provides a top level point of view for the goal of an Energy Optimized Aircraft. It outlines how one should approach the design of such an aircraft, the relevant vehicle systems technologies to enable energy optimization for fighter aircraft, and potential aircraft level measurands for determining degrees of goodness associated with incorporating different technologies. The top-to-bottom approach is provided for traceability of technologies being developed to aircraft and mission level goals.

A primary challenge in performing integrated system simulations is balancing system simulation speeds against the model fidelity of the individual components composing the system model. Traditionally, such integrated system models of the electrical systems on more electric aircraft (MEA) have required drastic simplifications, linearizations, and/or averaging of individual component models. Such reductions in fidelity can take significant effort from component engineers and often cause the integrated system simulation to neglect critical dynamic behaviors, making it difficult for system integrators to identify problems early in the design process. This paper utilizes recent advancements in co-simulation technology (DHS Links) to demonstrate how integrated system models can be created wherein individual component models do not require significant simplification to achieve reasonable integrated model simulation speeds.

Numerous modern military and commercial vehicles rely on portable, battery-powered sources for electric energy. Due to their highly specialized functions these vehicles are typically custom-designed, produced in limited numbers, and expensive. To mitigate the power system's contribution to these undesirable characteristics, this paper proposes a modular power system architecture consisting of “smart” power battery units (SPUs) that can be readily interconnected in numerous ways to provide distributed and coordinated system power management. The proposed SPUs contain a battery power source and a power electronics converter. They are compatible with multiple battery chemistries (or any energy storage device that can produce a terminal voltage), allowing them to be used with both existing and future energy storage technologies.

More electric aircraft (MEA) architectures have increased in complexity leading to a demand for evaluating the dynamic stability of their advanced electrical power systems (EPS). The system interactions found therein are amplified due to the increasingly integrated subsystems and on-demand power requirements of the EPS. Specifically, dynamic electrical loads with high peak-to-average power ratings as well as regenerative power capabilities have created a major challenge in design, control, and integration of the EPS and its components. Therefore, there exists a need to develop a theoretical framework that is feasible and useful for the specification and analysis of the stability of complex, multi-source, multi-load, reconfigurable EPS applicable to modern architectures. This paper will review linear and nonlinear system stability analysis approaches applicable to a scalable representative EPS architecture with a focus on system stability evaluation during large-displacement events.

An allocation algorithm for optimally assigning the various subsystem simulations, within a distributed heterogeneous simulation, to a specific set of computational resources has been developed. This algorithm uses a cost function that approximates the simulation execution time for each of the subsystems based upon the model complexity and the performance parameters of the available computer resources. The cost function is then evaluated to determine the optimal allocation that ensures the overall simulation execution time is minimized. In this paper, the allocation algorithm is applied to a large-scale power-electronic-based aircraft electrical power system. This study system is comprised of ten component simulations that together are modeled by 85 state variables and include 74 switching devices. Both optimal and sub-optimal allocations are considered and the predicted simulation run times are verified experimentally.

In this paper, a parametric average-value modeling approach is applied to a high-frequency six-phase aircraft generation subsystem. This approach utilizes a detailed switch-level model of the system to numerically establish the averaged dynamic relationships between the ac inputs of the rectifier and the dc-link outputs. A comparison between the average-value and detailed models is presented, wherein, the average-value model is shown to accurately portray both the large-signal time-domain transients and the small-signal frequency-domain characteristics. Since the discontinuous switching events are not present in the average-value model, significant gains can be realized in the computational performance. For the study system, the developed average-value simulation executed more than two orders of magnitude faster than the detailed simulation.

In this paper, a MATLAB-Simulink based general co-simulation approach is presented which supports multi-resolution simulation of distributed models in an integrated architecture. This approach was applied to simulating aircraft thermal performance in our Vehicle Systems Model Integration (VSMI) framework. A representative advanced aircraft thermal management system consisting of an engine, engine fuel thermal management system, aircraft fuel thermal management system and a power and thermal management system was used to evaluate the advantages and tradeoffs in using a co-simulation approach to system integration modeling. For a system constituting of multiple interacting sub-systems, an integrated model architecture can rapidly, and cost effectively address technology insertions and system evaluations. Utilizing standalone sub-system models with table-based boundary conditions often fails to effectively capture dynamic subsystem interactions that occurs in an integrated system.

The Air Force Research Laboratory is currently funding efforts under the More-Electric Aircraft (MEA) Generation II Study for developing a preliminary design of an electrical power generation and distribution system (EPGDS) for flight demonstration of an Internal Starter/Generator (IS/G) for the main engine on an advanced fighter-class aircraft. The MEA Initiative is a phased, goal-oriented, effort that develops technologies to enable the use of electrical power to perform aircraft functions that historically have been powered hydraulically, mechanically, or pneumatically. The use of electrical power for these functions has the potential for enhanced aircraft performance through improved efficiency, reliability, maintainability, and supportability. Today, the MEA effort is in its second phase, with an anticipated technology availability date of 2005.

Future more electric aircraft (MEA) architectures that improve electrical power system's (EPS's) source and load utilization will require advance stability analysis capabilities. Systems are becoming more complex with bidirectional flows from power regeneration, multiple sources per channel and higher peak to average power ratios. Unknown load profiles with large transients complicate common stability analysis techniques. Advancements in analysis are critical for providing useful feedback to the system integrator and designers of multi-source, multi-load power systems. Overall, a framework for evaluating stability with large displacement events has been developed. Within this framework, voltage transient bounds are obtained by identifying the worst case load profile. The results can be used by system designers or integrators to provide specifications or limits to suppliers. Subsystem suppliers can test and evaluate their design prior to integration and hardware development.

The diverse and complex requirements of next-generation energy optimized aircraft (EOA) demand detailed transient and dynamic model-based design (MBD) to ensure the proper operation of numerous interconnected and interacting subsystems across multiple disciplines. In support of the U.S. Air Force's Integrated Vehicle Energy Technology (INVENT) program, several MBD-derived software tools, including models of EOA technologies, have been developed. To validate these models and demonstrate the performance of EOA technologies, a series of Integrated Ground Demonstration (IGD) hardware tests are planned. Several of the numerous EOA software tools and MBD-based processes have been updated and adapted to support this activity.

Due to the instabilities that may occur in power systems with regulated loads such as those used in military aircraft, ships, and terrestrial vehicles, many analysis techniques and design methodologies have been developed to ensure stable operation for expected operating conditions. However, many of these techniques are difficult to apply to complex systems and do not guarantee large-displacement stability following major disturbances such as faults, regenerative operation, large pulsed loads, and/or the loss of generating capacity. In this paper, a design paradigm is set forth guaranteeing large-displacement stability of a power system containing a significant penetration of regulated (constant-power) loads for any value of load power up to and including the steady-state rating of the source. Initial investigations are performed using an idealized model of a dc-source to determine the minimum requirements that ensure large-displacement stability.

The movement to more-electric architectures during the past decade in military and commercial airborne systems continues to increase the complexity of designing and specifying the electric power system. In particular, the electrical power system (EPS) faces challenges in meeting the highly dynamic power demands of advanced power electronics based loads. This paper explores one approach to addressing these demands by proposing an electrical equivalent of the widely utilized hydraulic accumulator which has successfully been employed in hydraulic power system on aircraft for more than 50 years.