Search Results

With the diversity of mission capability and the associated requirement for more advanced technologies, designing modern unmanned aerial vehicle (UAV) systems is an especially challenging task. In particular, the increasing reliance on the electrical power system for delivering key aircraft functions, both electrical and mechanical, requires that a systems-approach be employed in their development. A key factor in this process is the use of modeling and simulation to inform upon critical design choices made. However, effective systems-level simulation of complex UAV power systems presents many challenges, which must be addressed to maximize the value of such methods. This paper presents the initial stages of a power system design process for a medium altitude long endurance (MALE) UAV focusing particularly on the development of three full candidate architecture models and associated technologies.

Uncontrolled rectifiers are featured heavily in aircraft electrical power systems performing a number of the power conversion and conditioning functions. Detailed modeling and simulation of these and other converters as part of a wider aircraft power system, whilst accurate, can be very computationally intensive, resulting in impractically slow simulation speed. One potential solution to this issue is the use of average-value converter models, which offer a much lower computational requirement and can utilize larger time steps. Of the average-value diode rectifier modeling methods presented in the research literature the parametric method is particularly well suited to system-level simulation because it can be readily derived to represent all modes of rectifier operation. To date however, published results utilizing this methodology have been limited to simpler power system architectures.

Within aircraft electrical network designs, energy storage systems (ESS) provide a means of decoupling the electrical-mechanical interactions between the aircraft electrical power system and the aircraft engine, meeting peak load demand and maintaining power quality during network disturbances and variable load conditions. Within the literature to date, control and management strategies of ESSs for such applications has primarily focused on normal network operation with only limited coverage on the behavior of such technologies under abnormal conditions and the subsequent impact on the operation of the wider power system. Through modeling and simulation of a generic aircraft electrical system, this paper will highlight the potential risks of the inherent, sub-optimal operation of certain existing control strategies during fault conditions.

Mass and efficiency are key performance indicators for the development and design of future electric power systems (EPS) for more-electric aircraft (MEA). However, to enable consideration of high-level EPS architecture design trades, there is a requirement for modelling and simulation based analysis to support this activity. The predominant focus to date has been towards the more detailed aspects of analysis, however there is also a significant requirement to be able to perform rapid high-level trades of candidate architectures and technologies. Such a capability facilitates a better appreciation of the conflicting desires to maximize availability and efficiency in candidate MEA architectures, whilst minimizing the overall system mass. It also provides a highly valuable and quantitative assessment of the systemic impact of new enabling technologies being considered for MEA applications.

There is a well-recognised need for robust simulation tools to support the design and evaluation of future More-Electric Engine and Aircraft (MEE/MEA) design concepts. Design options for these systems are increasingly complex, and normally include multiple power electronics converter topologies and machine drive units. In order to identify the most promising set of system configurations, a large number of technology variants need to be rapidly evaluated. This paper will describe a method of MEE/MEA system design with the use of a newly developed transient modeling, simulation and testing tool aimed at accelerating the identification process of optimal components, testing novel technologies and finding key solutions at an early development stage. The developed tool is a Matlab/Simulink library consisting of functional sub-system units, which can be rapidly integrated to build complex system architecture models.

Modern aerospace power systems commonly make use of uncontrolled rectifiers to satisfy many power conversion needs on board the aircraft. Whilst being highly accurate, an analytically detailed simulation of the aircraft power system, which includes all electric machine dynamics, semiconductor switching states, and power system dynamics, is often very computationally demanding. Average-value models of power electronic converters, with their reduced computational requirement, offer one potential solution to this issue. However, of the many converter topologies presented in the literature, average-value models of uncontrolled diode rectifiers are perhaps the most challenging to develop. The dependence of the rectifier's operating state on its loading conditions and the surrounding network topology complicates the derivation of average-value models.

The aviation industry has witnessed a technological shift towards the More Electric Aircraft (MEA) concept. This shift has been driven by a number of perceived benefits including performance optimization and reduced life-cycle costs. Increased electrification within MEA has made aircraft electrical networks larger and more complex and this necessitates an increased electrical power offtake from the engine. The paralleling of multiple generation sources across the aircraft is one potential design approach which could help improve engine operability and fuel efficiency within more-electric aircraft platforms. Accordingly, this paper will investigate options for the realization of paralleled generation systems within the context of current design and certification rules. The paper first illustrates, through simulation, that MIL-STD-704F voltage envelopes may be breached for some interconnected electrical architectures under fault conditions.

The increasing electrical demand in commercial and military aircraft justifies a growing need for higher voltage DC primary distribution systems. A DC system offers reduced power losses and space savings, which is of major importance for aircraft manufacturers. At present, challenges associated with DC systems include reliable fast acting short circuit protection. Solid State Contactors (SSC) have gained wide acceptance in traditional 28 VDC secondary systems for DC fault interruption. However, the reliable operation at higher operating voltages and currents requires further technology maturation. This paper examines a supporting method to SSC for more reliable fault mitigation by investigating bidirectional AC/DC converter topology with DC fault current blocking capability. Replacement of semiconductor switches with full bridge cells allows instant reversal of voltage polarities to limit rapid capacitor discharge and machine inductive currents.

Contemporary trends are leading towards the electrification of aircraft for urban mobility applications. Accordingly, there is a high demand for advancements in light-weight, high voltage technologies to realize these new aircraft types. Driven by recent developments in the automotive industry, hybrid Pyrofuse protection devices have emerged as one such new candidate technology. Pyrofuses offer rapid clearance of fault currents, reduced cost and weight when compared to conventional mechanical breakers. In addition, Pyrofuses have the ability to tune the time-current curve to fit the application’s fault response characteristics. However, Pyrofuses are non-resettable devices whose exclusive use for electrical protection could present potential operational hazards and certification challenges in aerospace applications. Model-based analysis will be critical in supporting this evaluation.