Search Results

Abstract Improving the aerodynamics of heavy trucks is an important consideration in the strive for more energy-efficient vehicles. Cooling drag is one part of the total aerodynamic resistance acting on a vehicle, which arises as a consequence of air flowing through the grille area, the heat exchangers, and the irregular under-hood area. Today cooling packages of heavy trucks are dimensioned for a critical cooling case, typically when the vehicle is driving fully laden, at low speed up a steep hill. However, for long-haul trucks, mostly operating at highway speeds on mostly level roads, it may not be necessary to have all the cooling airflow from an open-grille configuration. It can therefore be desirable for fuel consumption purposes, to shut off the entire cooling airflow, or a portion of it, under certain driving conditions dictated by the cooling demands. In Europe, most trucks operating on the roads are of cab-over-engine type, as a consequence of the length legislations present.

Abstract Electric heavy-duty tractor-trailers (EHDTT) offer an important option to reduce greenhouse gases (GHG) for the transportation sector. However, to increase the range of the EHDTT, this effort investigates critical vehicle design features that demonstrate a gain in overall freight efficiency of the vehicle. Specifically, factors affecting aerodynamics, rolling resistance, and gross vehicle weight are essential to arrive at practical input parameters for a comprehensive numerical model of the EHDTT, developed by the authors in a subsequent paper. For example, drag reduction devices like skirts, deturbulators, vortex generators, covers, and other commercially available apparatuses result in an aggregated coefficient of drag of 0.367. Furthermore, a mixed utilization of single-wide tires and dual tires allows for an optimized trade-off between low rolling resistance tires, traction, and durability.

Abstract Vehicle rolling resistance and weight are two of the factors that affect fuel economy. The vehicle tire rolling resistance has a more significant influence than aerodynamics drags on fuel economy at lower vehicle speeds, particularly true for medium- and heavy-duty trucks. Less vehicle weight reduces inertia loads, uphill grade resistance, and rolling resistance. The influence of weight on the fuel economy can be considerable particularly in light- to medium-duty truck classes because the weight makes up a larger portion of gross vehicle weight. This article presents an empirical investigation and a numerical analysis of the influences of rolling resistance and weight on the fuel economy of medium-duty trucks. The experimental tests include various tires and payloads applied on a total of 21vehicle configurations over three road profiles. These tests are used to assess the sensitivity of rolling resistance and weight to the vehicle fuel economy.

Abstract This paper presents a combined aero-thermal computational fluid dynamic (CFD) evaluation of platooning medium duty commercial vehicles in two highway configurations. Thermal analysis comparison is made between an approach that includes vehicle drag reduction on engine heat rejection and one that does not by assuming a constant heat rejection based on open road conditions. The paper concludes that accounting for aerodynamic drag reduction on engine heat load provides a more real world evaluation than assuming a constant heat load based on open road conditions. A 3D CFD underhood thermal simulations are performed in two different vehicle platooning configurations; (i) single-lane and (ii) two-lane traffic conditions. The vehicle platooning consists of two identical vehicles, i.e. leading and trailing vehicle. In this work, heat exchangers are modeled by two different heat rejection rate models.

Abstract The study of road loads on trucks plays a major role in assessing the effect of heavy-vehicle design on fuel conservation measures. Coastdown testing with full-scale vehicles in the field offers a good avenue to extract drag components, provided that random instrumentation faults and biased environmental conditions do not introduce errors into the results. However, full-scale coastdown testing is expensive, and environmental biases which are ever-present are difficult to control in the results reduction. Procedures introduced to overcome the shortcomings of full-scale field testing, such as wind tunnels and computational fluid dynamics (CFD), though very reliable, mainly focus on estimating the effects of aerodynamic drag forces to the neglect of other road loads which should be considered.

Abstract When commercial vehicles drive in a mountainous area, the complex road condition and long slopes cause frequent acceleration and braking, which will use 25% more fuel. And the brake temperature rises rapidly due to continuous braking on the long-distance downslopes, which will make the brake drum fail with the brake temperature exceeding 308°C [1]. Meanwhile, the kinetic energy is wasted during the driving progress on the slopes when the vehicle rolls up and down. Our laboratory built a model that could calculate the distance from the top of the slope, where the driver could release the accelerator pedal. Thus, on the slope, the vehicle uses less fuel when it rolls up and less brakes when down. What we do in this article is use this model in a real vehicle and measure how well it works.

Abstract This article analyses the flow field between two 1/8-scale Generalized European Transport System (GETS) models which are placed in a two-vehicle platoon at close distances. Numerical simulations using the lattice Boltzmann method together with a wind tunnel experiment (open jet facility, OJF) were executed. Next, to balance measurements, coaxial volumetric velocimetry (CVV) measurements were performed to obtain information about the flow field. Three intervehicle distances, 0.10, 0.45 and 0.91 times the vehicle length, were tested for various platoon configurations where the vehicles in the platoon varied in terms of front-edge radius and the addition of tails. At the smallest intervehicle distance, the greatest reductions in drag were found for both the leading and trailing vehicles. The flow in the gap between the two vehicles follows an S-shaped path with small variations between the configurations.

Abstract Due to the increasing requirements for efficiency, the wide range of characteristics and the improved possibilities of modern development and production processes, compressors in turbochargers have become more individualized in order to adapt to the requirements of internal combustion engines. An understanding of the working mechanisms as well as an understanding of the way that losses occur in the flow allows a reduced development effort during the optimization process. This article presents three-dimensional (3D) Computational Fluid Dynamics (CFD) investigations of the loss mechanisms and quantitative calculations of individual losses. The 3D-CFD method used in this article will reduce the drawbacks of one-dimensional calculation as far as possible. For example, the twist of the blades is taken into account and the “discrete” method is used for loss calculation instead of the “average” method.

Abstract TOC

Abstract Fuel consumption is at an all-time high, with crude oil set to get depleted in the next two decades. Drag force is one of the major components responsible for decreasing mileage and thus increasing fuel consumption in vehicles. Using passive modifications such as spherical depressions on the body surface, aerodynamic drag experienced by passenger vehicles can be significantly reduced. Spherical depressions are designed to delay flow separation, following which the wake size is reduced, resulting in a decrease in drag force. In this study, computer-aided design (CAD) models of generalized lightweight vehicles are made with dimples at the sides of the car, having a diameter of 60 mm and a center-to-center distance of 90 mm. Several models are created having depression aspect ratios (ARs) of 2, 4, 6, and 8, and each model is simulated to velocities of 22 m/s, 24 m/s, 26 m/s, 28 m/s, and 30 m/s.

Abstract A tire is one of the most essential parts of a vehicle that not only helps to provide stability but also helps in isolating shocks from the road surface as well as giving longitudinal and lateral powers for vehicle acceleration, steering, and braking. We are familiar with the tire as a pneumatic tire, but with recent developments, a new category of tires called non-pneumatic tires (NPT) has recently come to light. The unique design equipped for these tires provides them with several advantages over the conventional pneumatic tires, which include the elimination of tire blowouts and elimination of punctures. Since rotating tires are known to contribute up to one-third of the vehicle’s total aerodynamic force [5] and also because of the vast advantages provided by the NPT.

Abstract The civil aircraft nosewheel is clamped, lifted, and retained through the pick-up and holding system of the towbarless towing vehicle (TLTV), and the aircraft may be moved from the parking position to an adjacent one, the taxiway, a maintenance hangar, a location near the active runway, or conversely only with the power of the TLTV. The TLTV interfacing with the nose-landing gear of civil transport aircraft for the long-distance towing operations at a high speed could be defined as a towbarless aircraft taxiing system (TLATS). The dynamic loads induced by the system vibration may cause damage or reduce the certified safe-life limit of the nose-landing gear or the TLTV when the towing speed increases up to 40 km/h during the towing operations due to the maximum ramp weight of a heavy aircraft.

Abstract TOC

Abstract The present study assesses the use of a two-equation eddy-viscosity turbulence model, which is a shear-stress transport (SST) k-ω turbulence model, in two-way coupled aerodynamics and vehicle dynamics simulation of a heavy ground vehicle subjected to crosswind. The obtained results are compared with the corresponding results of the improved delayed detached-eddy simulation (IDDES) conducted at similar conditions from the previous literature. The aim is to evaluate the effects of different turbulence models used in aerodynamics simulations to resolve the vehicle dynamics results in two-way coupled simulations. The results present that the absolute relative percent differences between the lateral displacement, yaw angle and roll angle results of the SST k-ω and the IDDES simulations are less than 1%, 3%, and 10%, respectively.

Abstract Since the steady-state computational fluid dynamics (CFD) Reynolds-averaged Navier–Stokes (RANS) turbulence models offer low-cost and sensible accuracy, they are frequently utilized for bluff bodies’ external aerodynamics investigations (e.g., upwind, crosswind, and shape optimization). However, no firm certainty is made regarding the best model in terms of accuracy and cost. Based on cost and accuracy aspects, four RANS turbulence models were studied, which are Spalart–Allmaras, realizable k-ε, RNG k-ε, and SST k-ω. Ahmed body with a 25° slant angle benchmark case was introduced for this investigation. Two grids were generated to satisfy the near-wall treatment of each turbulence model. All grid settings were proposed and discussed in detail. Fluid-structure analysis was performed on five different planes.

Abstract SAE guidelines for computational fluid dynamics (CFD) and wind-tunnel tests on semi-trailer trucks were complied with to investigate the influence of adding a lateral skirts device—in the lower trailer part—on the improvement of the total drag force and the airflow structure around the truck. A reduced-scale (1:28) semi-trailer truck moving at three various speeds (i.e., 50 km/h, 75 km/h, and 100 km/h) is considered in this study. A reasonable agreement between experimental and numerical results was achieved in terms of the drag force parameter with a highest relative error of about 13% obtained in the case of the lowest speed (i.e., 50 km/h) of a truck without skirts. The numerical results yielded an average drag coefficient value of 0.48, which is reduced to 0.45 when the skirt device is added to the vehicle model.

Abstract Governmental regulations and customer demand for more energy-efficient vehicles are driving the development of new solutions in the automotive sector. One way of improving energy efficiency is by reducing the aerodynamic drag. A possible solution to achieve this is the concept of vehicles driving in close proximity, which is now becoming feasible considering the advances in vehicle automation and communication. This study focuses on the behavior of aerodynamic forces and flow effects in a two-truck platoon when more realistic road conditions, such as lateral offset and yaw, are present. The study is primarily numerical, but the results are validated against an experimental campaign conducted earlier by the authors. The main findings are that the drag of the leading truck is mostly governed by the base pressure of its trailer and that the truck sees only minor changes when a lateral offset is added, except at very short intervehicle distances.

Abstract Several accidents on the highways are due to strong crosswind conditions. The effectiveness of wind-break fences on a sudden strong crosswind has been investigated for a generic truck model. Two wind-break fences have been designed for stretching the rise time of aerodynamic loads. The dynamic response of the vehicle to crosswind while exiting a tunnel is simulated. Moving mesh CFD simulations and vehicle dynamics simulations are used to assess the effectiveness of the fences based on a safety index and the maximum lateral displacement of the vehicle. The proposed fences mitigate sudden aerodynamic loads and avoid the rollover of the vehicle.

Abstract The future of heavy trucking will require greater aerodynamic improvements and will involve active and automated systems that tailor varied parameters to optimize energy efficiency over a broad operational range. Continuous advancement of accuracy and precision is needed to realize these ever-smaller aerodynamic gains and to generate more detailed aerodynamic characterizations to feed these system-wide optimizations. To accomplish this, a comprehensive aerodynamic development approach is needed and should include computational fluid dynamics, operational testing, and wind tunnel testing. In 2016, a high-fidelity 1/3 scale wind tunnel model of a tractor-trailer heavy truck was developed for Reynolds equivalent wind tunnel testing with full coverage rolling road ground simulation. The model and support system were designed and built for use in the Windshear rolling road wind tunnel.

Abstract A non-pneumatic tire (NPT) has a lot of applications and is a viable option for the future, as they do not possess the problem of blowouts and air pressure maintenance. In these NPTs, the air-filled part is replaced by a flexible structure capable of withstanding the weight of the vehicle and delivering optimum performance. In the present study, endeavors have been made to analyze the rolling performance of NPTs by considering a light commercial vehicle as an application. The NPTs with three different configurations are studied by considering three hyperelastic material models for the hexagonal spoke structure and shear band under various loading conditions. Initially, static analysis for the models is conducted in two dimension (2D) and three dimension (3D) to validate the results, and these models were further extended to rolling analysis. The rolling resistance and slip ratios are obtained and compared in both 2D and 3D analyses.