Search Results

Abstract Truck platooning comprises a number of trucks equipped with automated lateral and longitudinal vehicle control technology, which allows them to move in tight formation with short following distances. This study is an initial step toward developing an understanding of the occupant injury risks associated with the multiple sequential impacts between truck platoons and roadside safety barriers, regardless of whether the crash is associated with a malfunction of automated control or human operation. Full-scale crash impacts of a tractor-trailer platoon into a concrete bridge guardrail were simulated for a specific Test Level condition according to the Manual for Assessing Safety Hardware (MASH) standards. The model of the bridge barrier was developed based on its drawings, and material properties were assigned according to literature data.

Abstract In recent years, several buses have ignited in some cities in China, causing numerous deaths and significant property damage. However, few research studies have been conducted to deal with such accidents. Therefore, in this work, a linear-shaped charge jet with rectangular cross sections was used to hew out evacuation routes for burning buses, and the parameter design for the shaped charge jet was improved according to asymmetry limitations and human tolerance. A numerical finite element simulation model of the behavior of a jet penetrating the jambs was established using ANSYS/LS-DYNA software. The asymmetrical characteristics of an arc segment in the structure of a rectangular-shaped charge were analyzed, in addition to the influence on the deviations of the jet penetration capacity and blast injuries to occupants caused by the side effects of detonation.

Abstract Reliability analysis of a large-scale system under random dynamic loads can be a very time-consuming task since it requires repeated studies of the system. In many engineering problems, for example, wave loads on an offshore platform, the excitation loads are defined using a power spectral density (PSD) function. For a given PSD function, one needs to generate many time histories to make sure the excitation load is modeled accurately. Global and local approximation methods are available to predict the system response efficiently. Each way has their advantages and shortcomings. The combined approximations (CA) method is an efficient method, which combines the advantages of local and global approximations. This work demonstrates two methodologies that utilize CA to reduce the cost of crude or separable Monte Carlo simulation (MCS) of linear dynamic systems when the excitation loads are defined using PSD functions.

Abstract This article focuses on the development of a two-way coupled methodology to predict gear temperature of oil jet lubricated transmissions using commercial software for computational fluid dynamics simulation. The proposed methodology applies an overset mesh technique to model the gear interlocking motion, multiphase of air-oil mixture, and heat transfer. Two gear pairs were used to develop and validate the methodology, an overdrive helical gear pair of a commercial vehicle transmission and a standard spur gear pair. Different oil jet lubrication methods were investigated using the proposed methodology, such as oil jet directed at the into-mesh position and at the out-of-mesh position. This investigation showed that out of mesh lubrication direction shows better cooling performance which is in well agreement with previous studies of literature.

Abstract TOC

Abstract Geometric variation stemming from manufacturing can be a limiting factor for the quality and reliability of products. Therefore, manufacturing assessments are increasingly being performed during the early stages of product development. In the aerospace industry, products are complex engineering systems, the development of which require multidisciplinary expertise. In such contexts, there are significant barriers against assessing the effects of geometric variation on the functionality of products. To overcome these barriers, this article introduces a new methodology consisting of a modelling approach linked to a multidisciplinary simulation environment. The modelling approach is based on the parametric point method, which allows point-scanned data to be transferred to parameterised CAD models. In a case study, the methodology is implemented in an industrial setting.

Abstract Truck crashes on Wyoming mountain passes due to brake heating has been a long-standing issue due to the steep downgrades that characterize some routes in the state. The grade severity rating system (GSRS) developed by the Federal Highway Administration (FHWA) to recommend maximum safe speeds has been identified as a viable countermeasure to reducing the incidence of downgrade truck crashes. However, several decades have passed since the GSRS was developed. In the decades since its development, truck features have undergone radical changes in terms of design. The streamlined design of tractors and trailers, use of drag reduction devices, changes in engine features, and adoption of radial tires have led to a reduction in the non-brake forces that retard motion. Truck brakes have also changed along with retarder characteristics. This has meant that maximum safe speeds recommended by the GSRS have been conservative.

Abstract Brake systems are one of the essential components of vehicles ensuring the safety of roads and passengers as well as accident prevention. Faulty brake systems, however, can cause inevitable accidents. Fatality analysis reporting system of NHTSA (National Highway Transport Safety Association) has reported that heavy and light trucks, which are obliged to be equipped with dual-circuit air brake system, were, respectively, involved in 8.8% and 38.0% of fatal crashes in the United States, during 2017. Number of heavy vehicle accidents due to complete failure of brake system is far less than accidents due to deficiencies such as worn out brake linings, out-of-adjustment push rod strokes, and leak in the circuits. Severe leakages due to ruptured air hoses or punctured reservoir are highly unlikely to be replenished by compressor and would be distinguished through pressure indicator.

Abstract Due to their large volume structure, when a heavy vehicle encounters sudden road conditions, emergency turns, or lane changes, it is very easy for vehicle rollover accidents to occur; however, well-designed suspension systems can greatly reduce vehicle rollover occurrence. In this article, a novel semi-active suspension adaptive control based on AdaBoost algorithm is proposed to effectively improve the vehicle rollover stability under dangerous working conditions. This research first established a vehicle rollover warning model based on the AdaBoost algorithm. Meanwhile, the approximate skyhook damping suspension model is established as the reference model of the semi-active suspension. Furthermore, the model reference adaptive control (MRAC) system is established based on Lyapunov stability theory, and the adaptive controller is designed.

Abstract TOC

Abstract Bond graph framework, established with MATLAB/Simulink, has a dual objective: analyze the system using bond graph and develop the system equations in symbolic form. This approach is a combination of the simulation skill of the MATLAB/Simulink and the modelling skill of the bond graph. In this analysis, a nine-degrees-of-freedom (9 DoF) three-wheeled vehicle model integrated with a 5 DoF human subject model is formulated using bond graph methodology and simulated using the Simulink toolbox. The present work is divided into two linear and nonlinear analyses of the dynamic behavior of sprung mass subjected to random and bumps inputs, respectively.

Abstract TOC

Abstract The article considers the issues of a systemic approach to studying safety levels in transport operations and ways to increase the safety of the operator-machine system in Russian transport. The principal and problematic issues of reducing the risk of injury by preventing traffic accidents and reducing the severity of their impact have not been sufficiently addressed. When performing transport operations, there are often disagreements between the elements of the “Operator, Machine, and Environment” technological system due to the influence of external conditions and parameters of the constantly-changing environment in the workplace. This leads to a sharp increase in the number of failures of system elements, which reduces the level of safety of transport operations.

Abstract Windshield glare at night is a safety concern for all drivers. Public transit bus drivers also face another concern about glare caused by interior lighting sources originally designed for passenger safety. The extent to which interior light reflections contribute to glare is unknown. Unique methods for measuring discomfort and disability glare during bus driving were developed. An initial simulation study measured windshield luminance inside of a New Flyer D40LF diesel bus parked in a controlled, artificial, totally darkened test environment. Findings indicated significant disability glare (from elevated luminance) in the drivers’ primary field of view due to interior reflections. Any reduction in contrast would result in less prominent glare if actual driving conditions differ. To assess this, levels of windshield glare were also measured with the bus parked on the roadside under the “background glow” of the urban environment.

Abstract In this article, the crashworthiness of a locomotive is assessed through finite element analysis (FEA). The present investigation is focused on the analysis of a locomotive with driving cab to improve the modeling approach and exploring the intrinsic structural weaknesses to improve its crashworthiness. The analyses are conducted according to the EN 15227 standard, which provide crashworthiness requirements for locomotive structure. The finite element model is validated in terms of acceleration and energy balance by the experimental results. The validated model is further used to assess the crashworthiness behavior at a higher impact speed, that is, 100, 160, and 225 km/hr. It has been noticed that local buckling occurs at different points, which reduces the desired progressive damage behavior in the locomotive. The results indicate that at higher speed, large plastic deformation occurs in the frontal part of the locomotive.

Abstract The objective of this article is to evaluate the effects of different blast protective modules to military vehicle structures and occupants. The dynamic responses of the V-shape integral basic armor, the add-on honeycomb sandwich structure module, and the anti-shock seat-dummy system were simulated and analyzed. The improvements of occupant survivability by different protective modules were compared using occupant injury criteria. The integral armored cab can maintain the integrity of the cab body structure. The add-on honeycomb sandwich armor reduces the peak structural deformation and velocity of the cab floor by 34.9% and 47.4%, respectively, compared with the cab with integral armors only. The integral armored cab with the anti-shock seat or the honeycomb sandwich structures reduces the occupant shock responses below the injury criteria. For different blast threat intensities, the selection of appropriate protective modules can meet protection requirements.

Abstract In-phase rear-wheel steering, where rear wheels are steered in the same direction of front wheels, has been widely investigated in the literature for vehicle stability improvements along with stability control systems. Much faster response can be achieved by steering the rear wheels automatically during an obstacle avoidance maneuver without applying the brakes where safe stopping distance is not available. Sudden lane change movements still remain challenging for heavy articulated vehicles, such as tractor and semitrailer combinations, particularly on roads with low coefficient of adhesion. Different lateral accelerations acting on tractor and semi-trailer may cause loss of stability resulting in jackknifing, trailer-swing, rollover, or slip-off. Several attempts have been made in the literature to use active steering of semi-trailer’s rear wheels to prevent jackknifing and rollover.

Abstract Heavy commercial vehicles play an important role in creating the trade and economic balance of countries. Also, the durability and safety of heavy commercial vehicles come to the fore. Heavy commercial vehicles consist of two parts. These are the chassis area with the equipment that allows the vehicle to move and the cabin section where the driver is located. The cabin area is the most important area that ensures the highest level of driver safety. Considering that the production of trucks is increasing day by day, it is inevitable for companies to increase their R&D activities in the field of cabin and cabin suspension systems for much safer, durable, and comfortable trucks. This study aims to determine the safe torque value of the fasteners and their assembly sequence of the Cab Suspension Console, which is one of the most important connection parts in a truck and which can cause a fatal accident by breaking.

Abstract This study provides a simulation-based comparative analysis of the distance and time needed for long combination vehicles (LCVs) - namely, A-doubles with 28-, 33-, and 48-ft trailers - to safely exercise an emergency, evasive steering maneuver such as required for obstacle avoidance. The results are also compared with conventional tractor-semitrailers with a single 53-ft trailer. A multi-body dynamic model for each vehicle combination is developed in TruckSim® with an attempt to assess the last point to steer (LPTS) and evasive time (ET) at various highway speeds under both dry and wet road conditions. The results indicate that the minimum avoidance distance and time required for the 28-ft doubles vary from 206 ft (60 mph) to 312 ft (80 mph) and 2.3 s to 2.6 s, respectively. The required LPTS represents a 6% to 31% increase when compared with 53-ft semitrucks.

Corrigendum - The word "Differ" in the title should be corrected to "Different". The correct title is: Rapid Methodology to Simultaneous Quantification of Different Antioxidants in Biodiesel Using Infrared Spectrometry and Multivariate Calibration.