Search Results

This paper describes the development of a non-linear finite element model of a commuter category aircraft seat designed to explore the issue of energy absorption in severe, but survivable, crashes. Using a reference seat, the paper presents a description of the model and the results of finite element modeling of the seat at increasingly severe impact velocities. The paper presents the results of a parallel experimental program, conducted to validate the model, in which instrumented crash dummies were drop tested in the reference seat at the same impact velocities as the simulation. Experimental results are reported for passenger lower lumbar loading, peak pelvic acceleration, and seat structural loading.

This paper reports on a research effort which seeks to dramatically reduce Emergency Medical Services (EMS) response time by developing and testing an Automated Crash Notification System (ACN) - an advanced in-vehicle system which automatically transmits the location and severity of a crash to EMS personnel. Existing ACN systems are expensive, tend to be available only for luxury car models and are not, in general, suitable for retrofit. This paper discusses the design, development, and testing of a new approach to ACN which combines emerging low-cost single chip/chip sets for wireless Web communication, GPS position location and crash detection for low cost Automated Crash Notification.

The National Highway Traffic Safety Administration (NHTSA) has developed a lumped mass computer model which simulates the interaction of a struck car door and an adjacent two dimensional seated dummy in side impacts. This model was used to investigate the effect of various vehicle design parameters on occupant responses and to define various methods to improve vehicle safety performance. This paper discusses the effectiveness of door padding and side structural stiffness to minimize potential for occupant thoracic injuries in 90° side impacts. Occupant response data were obtained with the aid of the computer model for a Moving Deformable Barrier striking a car at lateral velocities of 25, 30 and 35 mph. To determine the optimal padding and structure needed to minimize potential occupant injury, the Thoracic Trauma Index (TTI) was mapped in terms of different levels of struck car side stiffness and padding characteristics.

A new numerical model of the side impact dummy (SID) was developed based on the DYNA3D finite element code. The model includes all of the material and structural details of SID that influence its performance in crash testing and can be run on an engineering work station in a reasonable time. This paper describes the development of the finite element model and compares model predictions of acceleration and displacements with measurements made in SID calibration experiments. Preliminary parameter studies with the model show the influence of material properties and design on the measurements made with the SID instrument.

Road departures are one of the most deadly crash modes, accounting for nearly one third of all crash fatalities in the US. Lane departure warning (LDW) systems can warn the driver of the departure and lane departure prevention (LDP) systems can steer the vehicle back into the lane. One purpose of these systems is to reduce the quantity of road departure crashes. This paper presents a method to predict the maximum effectiveness of these systems. Thirty-nine (39) real world crashes from the National Automotive Sampling System (NASS) Crashworthiness Data System (CDS) database were reconstructed using pre-crash velocities downloaded for each case from the vehicle event data recorder (EDR). The pre-crash velocities were mapped onto the vehicle crash trajectory. The simulations assumed a warning was delivered when the lead tire crossed the lane line. Each case was simulated twice with driver reaction times of 0.38 s and 1.36 s after which time the driver began steering back toward the road.