This SAE Recommended Practice establishes methods for describing and measuring the driver's field of view. The document describes three methods for measuring the direct and indirect fields of view and the extent of obstructions within those fields. The first method uses any single pair of eye points to determine the fields or obstructions that would be seen by an individual driver. The second method uses the SAE Eyellipses defined in SAE J941 to determine the largest fields or obstructions that would be seen for a given percentage of the driving population. The third method uses specific eye points defined in SAE J941 to measure the extent of a specific field of view or obstruction for which those points were developed.
This SAE Recommended Practice establishes methods for describing and measuring the driver's field of view. The document describes three methods for measuring the direct and indirect fields of view and the extent of obstructions within those fields. The first method uses any single pair of eye points to determine the fields or obstructions that would be seen by an individual driver. The second method uses the SAE Eyellipses defined in SAE J941 to determine the largest fields or obstructions that would be seen for a given percentage of the driving population. The third method uses specific eye points defined in SAE J941 to measure the extent of a specific field of view or obstruction for which those points were developed.
This SAE Recommended Practice establishes methods for describing and measuring the driver’s field of view. The document describes three methods for measuring the direct and indirect fields of view and the extent of obstructions within those fields. The first method uses any single pair of eye points to determine the fields or obstructions that would be seen by an individual driver. The second method uses the SAE Eyellipses defined in SAE J941 to determine the largest fields or obstructions that would be seen for a given percentage of the driving population. The third method uses specific eye points defined in SAE J941 to measure the extent of a specific field of view or obstruction for which those points were developed.
This SAE Recommended Practice establishes methods for describing and measuring the driver's field of view. The document describes three methods for measuring the direct and indirect fields of view and the extent of obstructions within those fields. The first method uses any single pair of eye points to determine the fields or obstructions that would be seen by an individual driver. The second method uses the SAE Eyellipses defined in SAE J941 to determine the largest fields or obstructions that would be seen for a given percentage of the driving population. The third method uses specific eye points defined in SAE J941 to measure the extent of a specific field of view or obstruction for which those points were developed.
This SAE Recommended Practice establishes two-dimensional Eyellipses representative of 90th, 95th, and 99th percentile increments of driver eye locations for use in passenger cars, trucks, buses and multipurpose passenger vehicles. A uniform method for describing and measuring the driver’s direct and indirect fields of view using the Eyellipse is established in the Recommended Practice, Describing and Measuring the Driver’s Field of View-SAE J1050a.
This SAE Recommended Practice establishes two-dimensional eye ranges, representative of 90th, 95th, and 99th percentile increments* of the driving population, for use in defining the driver's visual requirements to interior and exterior environments in passenger cars. It is to be used in conjunction with the two-dimensional manikin specified in SAE J826. Definitions of the interior dimensions used in this SAE Recommended Practice are listed as an appendix to this practice and are quoted from Section E1 of the SAE Aerospace-Automotive Drawing Standards. Reproductions of the passenger car driver's eye range contours may be obtained from SAE by ordering eyellipse drawings supplementary to SAE J941.
This SAE Recommended Practice establishes two-dimensional eyellipses representative of 90th, 95th, and 99th percentile increments of driver eye locations and describes procedures for their use.
This SAE Recommended Practice establishes two-dimensional eyellipses representative of 90th, 95th, and 99th percentile increments of driver eye locations and describes procedures for their use in passenger cars, trucks, buses and multipurpose passenger vehicles.
This SAE Recommended Practice establishes the location of drivers' eyes inside a vehicle. Elliptical (eyellipse) models in three dimensions are used to represent tangent cutoff percentiles of driver eye locations. Procedures are provided to construct 95th and 99th percentile tangent cutoff eyellipses for a 50/50 gender mix, adult user population. Neck pivot (P) points are defined in Section 6 to establish specific left and right eye points for direct and indirect viewing tasks described in SAE J1050. These P points are defined only for the adjustable seat eyellipses defined in Section 4. This document applies to Class A Vehicles (Passenger Cars, Multipurpose Passenger Vehicles, and Light Trucks) as defined in SAE J1100. It also applies to Class B vehicles (Heavy Trucks), although these eyellipses have not been updated from previous versions of SAE J941. The appendices are provided for information only and are not a requirement of this document.
This SAE Recommended Practice establishes the location of drivers’ eyes inside a vehicle. Elliptical (eyellipse) models in three dimensions are used to represent tangent cutoff percentiles of driver eye locations. Procedures are provided to construct 95th and 99th percentile tangent cutoff eyellipses for a 50/50 gender mix, adult user population. Neck pivot (P) points are defined in Section 6 to establish specific left and right eye points for direct and indirect viewing tasks described in SAE J1050. These P points are defined only for the adjustable seat eyellipses defined in Section 4. This document applies to Class A Vehicles (Passenger Cars, Multipurpose Passenger Vehicles, and Light Trucks) as defined in SAE J1100. It also applies to Class B vehicles (Heavy Trucks), although these eyellipses have not been updated from previous versions of SAE J941. The appendices are provided for information only and are not a requirement of this document.
This SAE Recommended Practice establishes the location of drivers’ eyes inside a vehicle. Elliptical (eyellipse) models in three dimensions are used to represent tangent cutoff percentiles of driver eye locations. Procedures are provided to construct 95 and 99% tangent cutoff eyellipses for a 50/50 gender mix, United States user population. Neck pivot (P) points are defined in Section 6 to establish specific left and right eye points for direct and indirect viewing tasks described in SAE J1050. These P Points are defined only for the adjustable seat eyellipses defined in Section 4. This document applies to Class A Vehicles (Passenger Cars, Multipurpose Passenger Vehicles, and Light Trucks) as defined in SAE J1100. It also applies to Class B vehicles (Heavy Trucks), although these eyellipses have not been updated from previous versions of SAE J941. The appendices are provided for information only and are not a requirement of this document.
This SAE Recommended Practice establishes the location of drivers' eyes inside a vehicle for the purpose of measuring the drivers' field of view. Elliptical (eyellipse) models in both two and three dimensions are used to represent 95th and 99th percentiles of driver eye locations. The procedure used to locate eyellipses in passenger cars differs from the procedure used for heavy trucks. Selected eye (E) points, useful in certain viewing tasks, are derived from the 95th eyellipse. For application of this document, refer to SAE J1050.