Refine Your Search

Date

Date

Telecommunications Aircraft Electrical, Electronics, and Avionics AMS D Nonferrous Alloys Committee

Search Results

Viewing 1 to 20 of 25
12Next >Last >>
Sort by published
Standard

ALUMINUM ALLOY, 7178-T76, ALCLAD PLATE AND SHEET, IMPROVED EXFOLIATION RESISTANT
1997-08-01
HISTORICAL
AMSQQA250/22
This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.
Standard

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant
2012-04-04
HISTORICAL
AMSQQA250/22B
This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.
Standard

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant
1998-09-01
HISTORICAL
AMSQQA250/22A
This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.
Standard

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet Improved Exfoliation Resistant
2014-02-14
CURRENT
AMSQQA250/22C
This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces
Standard

TOLERANCES, METRIC Copper and Copper Alloy Bars and Rods
1988-04-01
HISTORICAL
MAM2221A
This specification covers established metric manufacturing tolerances applicable to bars and rods of copper and copper alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of a specified range. AMS 2221, specified in inch/pound units, is the equivalent of this MAM.
Standard

Tolerances, Metric Copper and Copper Alloy Bars and Rods
1999-10-01
HISTORICAL
MAM2221B
This specification covers established metric manufacturing tolerances applicable to bars and rods of copper and copper alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive" is used to apply only to the higher figure of a specified range.
Standard

Tolerances, Metric Copper and Copper Alloy Bars and Rods
2003-03-12
HISTORICAL
MAM2221C
This specification covers established metric manufacturing tolerances applicable to bars and rods of copper and copper alloys ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term “exclusive” is used to apply only to the higher figure of a specified range.
Standard

TOLERANCES Aluminum Alloy Standard Structural Shapes
2011-08-10
HISTORICAL
AMS2204F
This specification covers established manufacturing tolerances applicable to aluminum alloy standard structural shapes ordered to inch/pound dimensions. Standard structural shapes are shapes in certain standard alloys, tempers, sizes, and sections such as angles, channels, Tees, Zees, I-Beams, and H-Beams commonly used for structural purposes. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.
Standard

TOLERANCES Aluminum Alloy Standard Structural Shapes
1983-10-01
HISTORICAL
AMS2204E
This specification covers established manufacturing tolerances applicable to aluminum alloy standard structural shapes ordered to inch/pound dimensions. Standard structural shapes are shapes in certain standard alloys, tempers, sizes, and sections such as angles, channels, Tees, Zees, I-Beams, and H-Beams commonly used for structural purposes. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.
Standard

TOLERANCES Aluminum Alloy Standard Structural Shapes
1973-05-01
HISTORICAL
AMS2204D
This specification covers established manufacturing tolerances applicable to aluminum-base alloy standard structural shapes. Standard structural shapes are shapes in certain standard alloys, tempers, sizes, and sections such as angles, channels, Tees, Zees, I-Beams, and H-Beams commonly used for structural purposes. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range. Tolerances in U.S. conventional units are primary; tolerances in SI units are shown as the equivalent of the inch/foot/degree dimensions and are not to be construed as standard for product produced to SI dimensions.
Standard

TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
1994-04-01
HISTORICAL
MAM2204A
This specification covers established metric manufacturing tolerances applicable to aluminum alloy standard structural shapes ordered to metric dimensions. Standard structural shapes are shapes in certain standard alloys, tempers, sizes, and sections such as angles, channels, Tees, Zees, I-Beams, and H-Beams commonly used for structural purposes. These tolerances apply to all conditions, unless otherwise noted.
12Next >Last >>
X