Search Results

This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

This specification covers the requirements for one type of tiedown fitting for installation in the floors of aircraft.

This specification establishes requirements for two types of aircraft floor fittings for tiedown of cargo and seats, and two types of cargo tiedown rings.

This specification covers one type of 5,000-pound capacity aircraft cargo tie down. The tie down is designated CGU-1/B and is furnished in a minimum length of 240 inches.

Air cargo pallets and their cargo restraint nets constitute aircraft Unit Load Devices, defined by industry standards and airworthiness certified based on Technical Standard Order (TSO) C90c in accordance with the requirements of NAS 3610. This guarantees their design to be intrinsically safe for flight on board compatible aircraft types. However, actual flight safety also requires these certified pieces of equipment to be properly used: numerous occurrences have demonstrated a certified ULD can nevertheless jeopardize flight safety if loaded or restrained in an inadequate manner.

Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria.

Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. a) These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria. b) These devices usually form an integral part of the aircraft and as such are subject to regulatory agencies' requirements to assure structural integrity.

Perishable cargoes, e.g., dairy produce, fruit, vegetables, flowers, frozen foods, meat, fish, etc., require maintenance of specific temperature ranges during air related door-to-door transportation.

The purpose of this document is to establish minimum operational requirements that will ensure that perishable cargoes in insulated standard airborne containers can be kept in prime condition during the ground handling and air transportation cycle within a maximum time span of 48 h.

In accordance with § 4.11 of AS36100, materials used in the construction of pallets, nets, and containers shall take into account the effects of environmental conditions, such as temperature, humidity, and UV degradation, expected in service. In accordance with (E)TSO-C90, the applicant shall consider environmental degradation due to aging, ultra-violet (UV) exposure, weathering, etc., for any materials used in the construction of pallets, nets, and containers. The purpose of this Aerospace Recommended Practice (ARP) is to provide guidelines for the basic requirements to be considered regarding environmental degradation effects when qualifying composite materials in the design to fulfill the (E)TSO-C90 Minimum Performance Standard. Material qualification is the verifying of a materials attributes and characterizations, which are typically determined through testing.

This SAE Aerospace Standard (AS) defines the minimum performance standard to demonstrate compliance with the regulatory design, test and operational requirements for a Temperature Controlled Container (TCC).

This specification covers one type of aircraft cargo tie down, designated Type C-2.

This specification covers one type of aircraft cargo tie down, designated Type C-2.

This SAE Aerospace Information Report (AIR) covers information relative to ULDs (Unit Load Devices) container and pallet configurations, maximum usable container, pallet and bulk compartment volumes and tare weights for the lower deck of various wide-body aircraft. Bulk compartment volumes are also included for standard-body aircraft.

This SAE Aerospace Information Report (AIR) covers information relative to ULDs (Unit Load Devices) container and pallet configurations, maximum usable container, pallet and bulk compartment volumes and tare weights for the lower deck of various wide-body aircraft. Bulk compartment volumes are also included for standard-body aircraft.

This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.

This SAE Aerospace Information Report (AIR) is intended to assist the user (aircraft manufacturer/airline) in the following areas: a In the decision of whether or not to plan for the installation of a powered drive system in the cargo loading system (CLS) during the definition of the aircraft on-board cargo loading system. b If a powered drive system is decided upon, to provide general requirements to be considered during the preparation of component specifications for the powered drive units (PDUs) to be used. This provides a selection of criteria in order to obtain an optimum PDU for the application considered.

This specification establishes dimensional, structural and environmental requirements for interline pallet nets.

This specification establishes dimensional, structural and environmental requirements for two types of interline pallet nets. Type II covers NAS 3610 code sizes and Type III covers other sizes not currently included in NAS 3610.