Search Results

A graphical user interface (GUI) toolbox called Vehicle System Simulator (VSS) is developed in MATLAB to ease the use of this vehicle model and hopefully encourage its widespread application in the future. This toolbox uses the inherent MATLAB discrete-time solvers and is mainly based on Level-2 s-function design. This paper describes its built-in vehicle dynamics model based on multibody dynamics approach and nonlinear tire models, and traction/braking control systems including Cruise Control and Differential Braking systems. The built-in dynamics model is validated against CarSim 8 and the simulation results prove its accuracy. This paper illustrates the application of this new MATLAB toolbox called Vehicle System Simulator and discusses its development process, limitations, and future improvements.

The objective of this paper is to describe a Class 8 heavy truck that the Virginia Tech Center for Transportation Research has modified and instrumented for use in evaluating Intelligent Transportation Systems (ITS) technologies. The truck is capable of recording a variety of data, both electronic and video, in real-time from a suite of sensors and cameras that have been inconspicuously mounted on the tractor. The tractor, trailer, and instrumentation package enable Virginia Tech to conduct commercial vehicle ITS research related to safety and human factors, and advanced vehicle control systems (AVCS). This paper will describe the instrumentation package, and address both general and specific types of research that can be performed using this truck.

Race teams frequently use tools like shock dynamometers (dynos) to characterize the complex behavior of shock absorbers after they are built and before they are put on the race car for testing to make sure they perform as expected. One way to make use of this shock dyno data is to use it to create a model to predict shock absorber performance over a wide range of inputs. These shock models can then be integrated into vehicle simulations to predict how the vehicle will respond to different shock selections, and aid the race engineer to narrow down possible shock setups before track testing. This paper develops an intuitive nonlinear dynamic shock absorber model that can be quickly fit to experimental data and implemented in simulation studies. Unlike other existing dynamic race shock models, it does not suffer from the complexity of modeling complex physical behavior, or the inefficiencies of unstructured black-box modeling.

This study pertains to motion control algorithms using statistical calculations based on relative displacement measurements, in particular where the rattle space is strictly limited by fixed end-stops and a load leveling system that allows for roll to go undetected by the sensors. One such application is the cab suspension of semi trucks that use widely-spaced springs and dampers and a load leveling system that is placed between the suspensions, near the center line of the cab. In such systems it is possible for the suspension on the two sides of the vehicle to settle at different ride heights due to uneven loading or the crown of the road. This paper will compare the use of two moving average signals (one positive and one negative) to the use of one root mean square (RMS) signal, all calculated based on the relative displacement measurement.

In this paper a yaw stability control algorithm along with an emergency roll control strategy have been developed. The yaw stability controller and emergency roll controller were both developed using linear two degree-of-freedom vehicle models. The yaw stability controller is based on Lyapunov stability criteria and uses vehicle lateral acceleration and yaw rate measurements to calculate the corrective yaw moment required to stabilize the vehicle yaw motion. The corrective yaw moment is then applied by means of a differential braking strategy in which one wheel is selected to be braked with appropriate brake torque applied. The emergency roll control strategy is based on a rollover coefficient related to vehicle static stability factor. The emergency roll control strategy utilizes vehicle lateral acceleration measurements to calculate the roll coefficient. If the roll coefficient exceeds some predetermined threshold value the emergency roll control strategy will deploy.

The U.S. Army Tank Automotive Research Development and Engineering Center (TARDEC) and the U.S. Army Corps of Engineers (USACE) are improving modeling and simulation technologies in order to predict the performance of Army ground platforms with a high degree of confidence. In order to provide a framework within which to evaluate the simulation technologies and provide a measure of the progress of the effort, a suite of virtual test operating procedures are being implemented. This framework is called the Virtual Evaluation Suite (VES). It is applicable to the study of ground vehicle stability, handling, ride, mobility, and durability over all terrains under all weather conditions. Although developed in order to evaluate simulation technologies, the VES may be considered a simulation that could be used to exercise any ground platform model that meets the VES standard vehicle interface.

A Vehicle Dynamics and Mobility Server (VDMS) is being developed by the U.S. Army to perform real-time high-fidelity simulation of robotic vehicle concepts. It allows a set of conceptual Unmanned Ground Vehicles (UGVs) to be selected and configured for the purposes of evaluating their mobility performance in a simulated battlefield scenario. VDMS includes real-time ground vehicle models operating over high-resolution digital terrain. The models consist of three-dimensional multi-body vehicle dynamics, off-road vehicle-soil interaction, collision detection and obstacle negotiation code, and autonomous control algorithms. A minimally completed VDMS was used in an RDEC Federation Calibration Experiment (CalEx) in October 2001 to predict the mobility of ten robotic scout vehicles. This paper presents the rationale, requirements, design, and implementation of VDMS. It also briefly discusses other possible applications of VDMS and the future direction of VDMS.

A virtual, all-season test site for use in real-time vehicle simulators and mobility models was constructed of an Army firing range in Northern Vermont. The virtual terrain will mimic the terrain of our Virtual Data Acquisition and Test Site (VDATS) at Ethan Allen Firing Range (EAFR). The objective is to realistically simulate on- and off-road vehicle performance in all weather conditions for training and vehicle design for the US Army. To this end, several spatial datasets were needed to accurately map the terrain and estimate the state-of-the-ground and terrain strength at different times of the year. The terrain strength is characterized by terramechanics properties used in algorithms to calculate the forces at the vehicle-terrain interface. The performance of the real vehicles will be compared to the simulated vehicle performance of operator-in-the-loop and unmanned vehicles for validation of the simulations.

The U.S. Army uses the root mean square and power spectral density of elevation to characterize road/terrain (off-road) roughness for durability. This paper describes research aimed toward improving these metrics. The focus is on taking previously developed metrics and applying them to mathematically generated terrains to determine how each metric discerns the relative roughness of the terrains from a vehicle durability perspective. Multiple terrains for each roughness level were evaluated to determine the variability for each terrain rating metric. One method currently under consideration is running a relatively simple, yet vehicle class specific, model over a given terrain and using predicted vehicle response(s) to classify or characterize the terrain.

The U.S. Army uses the root mean square and power spectral density of elevation to characterize road/terrain (off-road) roughness for durability. This paper describes research aimed toward improving these metrics. The focus is on taking previously developed metrics and applying them to mathematically generated terrains to determine how each metric discerns the relative roughness of the terrains from a vehicle durability perspective. Multiple terrains for each roughness level were evaluated to determine the variability for each terrain rating metric. One method currently under consideration is running a relatively simple, yet vehicle class specific, model over a given terrain and using predicted vehicle response(s) to classify or characterize the terrain.

The effect of primary suspensions (shock absorbers) on the body and axle motion of heavy trucks is investigated. A simulation program is used to show how damper tuning of conventional passive dampers and “skyhook” semiactive dampers effect ride, as measured by body acceleration, and axle motion, as measured by tire acceleration and tire deflection. Special attention is made to the coupling and interaction between the body and the axle motion. It is shown that passive and semiactive dampers have a different effect on the axle and body dynamics.

In the context of off-road vehicle simulations, deformable terrain models mostly fall into three categories: simple visualization of the deformed terrain only, use of empirical relationships for the deformation, or finite/discrete element approaches for the terrain. A real-time vehicle dynamics simulation with a physics-based tire model (brush, ring or beam-based models) requires a terrain model that accurately reflects the deformation and response of the soil to all possible inputs of the tire in order to correctly simulate the response of the vehicle. The real-time requirement makes complex finite/discrete element approaches unfeasible, and the use of a ring or beam -based tire model excludes purely empirical terrain models. We present the development of a three-dimensional vehicle/terrain interaction model which is comprised of a tire and deformable terrain model to be used with a real-time vehicle dynamics simulator.

The vertical force generated from terrain-tire interaction has long been of interest for vehicle dynamic simulations and chassis development. To improve simulation efficiency while still providing reliable load prediction, a terrain pre-filtering technique using a constraint mode tire model is developed. The wheel is assumed to convey one quarter of the vehicle load constantly. At each location along the tire's path, the wheel center height is adjusted until the spindle load reaches the pre-designated load. The resultant vertical trajectory of the wheel center can be used as an equivalent terrain profile input to a simplified tire model. During iterative simulations, the filtered terrain profile, coupled with a simple point follower tire model is used to predict the spindle force. The same vehicle dynamic simulation system coupled with constraint mode tire model is built to generate reference forces.