Search Results

In an authors' previous SAE publication, an energy management control strategy has been proposed for the basic, charge-depleting/charge-sustaining (CD/CS) regime of an Extended Range Electric Vehicle (EREV). The strategy is based on combining a rule-based controller, including a state-of-charge regulator, with an equivalent consumption minimization strategy. This paper presents an extension of the control strategy, which can provide a favorable vehicle behavior in the more general blended (BLND) operating regime, as well. Dynamic programming-based control variables optimization is first conducted to gain an insight into the vehicle optimal behavior in the BLND regime, facilitate the feedback control strategy development/extension, and serve as a benchmark for the control strategy verification. Next, a parameter optimization method is applied to find optimal values of critical engine on/off thresholds.

Modern automotive heating, ventilation, and air-conditioning (HVAC) systems have multiple and often redundant actuators. Design of a control system that optimally synthesizes multiple control actions while satisfying control set points and system hardware-related constraints is necessary to maximize HVAC efficiency. To this end, an optimization approach to control system design is proposed in this paper and demonstrated for a generic air-conditioning (A/C) system. The paper first outlines a nonlinear 12th-order A/C dynamics model based on the moving-boundary method. Then, the A/C control system is defined, which combines feedback controllers commanding the compressor speed and expansion valve opening, and open-loop actions of condenser and blower fans. Next, a three-stage, multi-objective genetic algorithm-based approach of control system optimization is proposed.

This paper deals with a thorough analysis of using two fundamentally different algorithms for optimization of electric vehicle (EV) fleet charging. The first one is linear programming (LP) algorithm which is particularly suitable for solving linear optimization problems, and the second one is dynamic programming (DP) which can guarantee the global optimality of a solution for a general nonlinear optimization problem with non-convex constraints. Functionality of the considered algorithms is demonstrated through a case study related to a delivery EV fleet, which is modelled through the aggregate battery modeling approach, and for which realistic driving data are available. The algorithms are compared in terms of execution time and charging cost achieved, thus potentially revealing more appropriate algorithm for real-time charging applications.

The paper proposes an energy management control strategy for a Extended Range Electric Vehicle comprising an internal combustion engine, two electrical machines, and three clutches. The control strategy smoothly combines a rule-based strategy, extended with a battery state-of-charge (SoC) controller, with an instantaneous optimization algorithm based on equivalent consumption minimization strategy (ECMS). In addition to engine on/off logic, the rule based controller includes rules which are extracted from the global dynamic programming-based off-line optimization results. The control strategy is verified by means of computer simulation for different operating modes and certification driving cycles, and the simulation results are compared with the dynamic programming optimization results which are considered as globally optimal.

A dynamic programming-based algorithm is developed and used for off-line optimization of range extended electric vehicle power train control variables over standardized certification driving cycles. The aim is to minimize the fuel consumption subject to battery state-of-charge constraints and physical limits of different power train variables. The control variables to be optimized include engine torque and electric machine speed, as well as a variable that selects the power train operating mode. The optimization results are presented for four characteristic certification driving cycles and characteristic vehicle operating regimes including electric driving during charge depleting mode, hybrid driving during charge sustaining mode, and combined/blended regime.

Design and optimization of a plug-in hybrid electric vehicle (PHEV) control strategy is typically based on a backward-looking (BWD) powertrain model, which ensures a high computational efficiency by neglecting the powertrain dynamics. However, the control strategy developed for BWD model may considerably underperform when applied to a forward-looking (FWD) powertrain model, which includes a dynamic driver model, powertrain dynamics, and corresponding low-level controls. This paper deals with bond-graph based modelling and energy balance analysis of BWD and FWD powertrain models for a P2 parallel PHEV-type city bus equipped with a 12-speed automated manual transmission. The powertrain consists of a motor/generator (M/G) machine supplied by the lithium-ion battery and placed at the transmission input shaft, and an internal combustion engine which can be disconnected from the rest of the powertrain by a main clutch placed between the engine and M/G machine.

This paper proposes a method for multi-objective parameter optimization of piecewise linear time profiles for control of Automatic Transmission (AT) shifts and presents results obtained on an example of a powertrain with a 10-speed automatic transmission. The paper first outlines the powertrain dynamics model. Then, the AT control trajectory optimization approach is outlined and employed with the aim of getting insights into the optimal shift control profiles and related performance. The parameter optimization problem is to find parameters of piecewise linear shift control profiles, which provide a trade-off between the shift comfort and performance. The optimization problem is solved by using the multi-objective genetic algorithm MOGA-II incorporated within modeFRONTIER environment.

This paper considers using linear quadratic regulation (LQR) for multi-input control of the Automatic Transmission (AT) upshift inertia phase. The considered control inputs include the transmission input/engine torque, oncoming clutch torque, and traditionally not used off-going clutch torque. Use of the off-going clutch has been motivated by discussed Control Trajectory Optimization (CTO) results demonstrating that employing the off-going clutch during the inertia phase along with the main, oncoming clutch can improve the upshift control performance in terms of the shift duration and/or comfort by trading off the transmission efficiency and control simplicity to some extent. The proposed LQR approach provides setting an optimal trade-off between the conflicting criteria related to driving comfort and clutches thermal energy loss.

Automatic transmission (AT) upshift control performance in terms of shift duration and comfort can be improved during the inertia phase by coordinating the off-going clutch together with oncoming clutch and engine torque. The performance improvement is highest in low gear shifts (i.e., for high ratio steps), which are typically performed with open torque converter. In this paper, a discrete-time, linear quadratic regulation (LQR) is applied during the upshift inertia phase, as it provides an optimal multi-input/multi-output control action with respect to the prescribed cost function. The LQR law is based on a reduced-order drivetrain model, which is applicable to actual transmissions characterized by a limited number of available state measurements. The reduced-order model includes the linearized torque converter model. The shift duration is ensured by precise tracking of a linear-like oncoming clutch slip speed reference profile.

Since the Extended range electric vehicle (EREV) powertrain structure is based on different power sources, a key vehicle design activity is related to development of an optimal control strategy for achieving a high fuel economy potential. The central role in developing an optimized energy management strategy is related to availability of computationally-efficient, high-fidelity EREV powertrain model. This paper proposes a method for developing an extended quasi-static backward-looking EREV powertrain model, which when compared to traditional backward model accounts for powertrain transient effects through additional fuel and battery state-of-charge consumptions. The effects of powertrain transients are characterized by means of extensive simulations of dynamic forward-looking EREV powertrain model covering a wide array of possible powertrain transient scenarios.