Search Results

Standard

Test Method for Determining Window Fogging Resistance of Interior Trim Materials

1985-02-01

CURRENT

J275_198502

To simulate the formation of a condensate on the inside surface of clear glass when interior trim materials are exposed to an external source of radiant energy. To provide a method of measuring the effect of condensate formation on light transmittance.

Standard

Nonmetallic Trim Materials—Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas

2014-06-03

HISTORICAL

J322_201406

This SAE Recommended Practice is designed to reveal discoloration which may occur when nonmetallic materials used for trimming automobiles are exposed for a limited time to an atmosphere containing hydrogen sulfide.

Standard

Fiberboard Crease Bending Test

2010-05-10

HISTORICAL

J119_201005

This test method is designed to determine the suitability of a painted or unpainted fiberboard for application involving creasing and bending. The specific purpose of the test is to determine whether a given material, properly creased, can be bent along the impressed crease without objectionable failure on the surface of the bend.

Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

2012-10-15

HISTORICAL

J912_201210

This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.

Standard

Instrumental Color Difference Measurements for Colorfastness of Automotive Interior Trim Materials

2014-01-06

HISTORICAL

J1767_201401

The practice described applies to textile and flexible plastic parts and materials used in automotive vehicles. Special care should be taken when high pile carpet samples are being evaluated.

Standard

Method of Testing Resistance to Scuffing of Trim Materials

2020-09-18

CURRENT

J365_202009

This test can be used to determine the resistance to scuffing of test specimens such as fiberboards, fabrics, vinyl-coated fabrics, leathers, and similar trim materials.

Standard

Method of Testing Resistance to Scuffing of Trim Materials

2012-05-08

HISTORICAL

J365_201205

This test can be used to determine the resistance to scuffing of test specimens such as fiberboards, fabrics, vinyl-coated fabrics, leathers, and similar trim materials.

Standard

TEST METHOD FOR DETERMINING COLD CRACKING OF FLEXIBLE PLASTIC MATERIALS

1996-01-01

HISTORICAL

J323_199601

This SAE Recommended Practice is applicable for determining the cold characteristics of vinyl-coated fabrics and other automotive plastic materials, as applicable. It consists of three different methods for determining low-temperature properties of materials depending on type of material and end use.

Standard

Test Method for Determining Cold Cracking of Flexible Plastic Materials

1998-07-01

HISTORICAL

J323_199807

This SAE Recommended Practice is applicable for determining the cold characteristics of vinyl-coated fabrics and other automotive plastic materials, as applicable. It consists of three different methods for determining low-temperature properties of materials depending on type of material and end use.

Standard

Test Method for Determining Cold Cracking of Flexible Plastic Materials

2021-09-15

CURRENT

J323_202109

This SAE Recommended Practice is applicable for determining the cold characteristics of flexible plastic materials, as applicable. It consists of three different methods for determining low-temperature properties of materials depending on type of material and end use. The method used shall be as specified by the contractual parties.

Standard

Test Method for Determining Cold Cracking of Flexible Plastic Materials

2004-01-28

HISTORICAL

J323_200401

This SAE Recommended Practice is applicable for determining the cold characteristics of flexible plastic materials, as applicable. It consists of three different methods for determining low-temperature properties of materials depending on type of material and end use.

Standard

Test Method for Determining Cold Cracking of Flexible Plastic Materials

2009-11-09

HISTORICAL

J323_200911

This SAE Recommended Practice is applicable for determining the cold characteristics of flexible plastic materials, as applicable. It consists of three different methods for determining low-temperature properties of materials depending on type of material and end use. The method used shall be as specified by the contractual parties.

Standard

Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials

2023-02-20

CURRENT

J912_202302

This test method is designed to indicate the degree of surface tackiness, color transfer, loss of embossment, and surface marring when two trim materials are placed face to face under specific conditions of time, temperature, and pressure. These specific conditions are not dictated in this test procedure but will be found in the material standards which govern each type of trim material to be tested.

Standard

Test Method for Determining Resistance to Fiber Loss, Resistance to Abrasion and Bearding of Automotive Carpet Materials

2011-05-26

HISTORICAL

J1530_201105

This test method covers determination of abrasion resistance, fiber loss and bearding resistance of automotive carpet materials.

Standard

Standard Classification System for Fiberboards

2014-06-04

HISTORICAL

J1323_201406

This SAE Standard provides a means for specifying or describing the pertinent properties of fiberboards for automotive applications. The materials normally specified by this standard are defined in SAE J947. The test methods commonly used for fiberboards are defined in SAE J315.

Standard

Test Method of Stretch and Set of Textiles and Plastics

2022-09-06

CURRENT

J855_202209

This method of test applies to the measurement of elastic and recovery properties of materials after being subjected to a low-static load.

Standard

Test Method for Measuring Thickness of Automotive Textiles and Plastics

2023-02-20

CURRENT

J882_202302

This test is designed to measure the thickness of textiles, plastics, and similar materials.

Standard

Test Method for Measuring Thickness of Automotive Textiles and Plastics

2012-09-17

HISTORICAL

J882_201209

This test is designed to measure the thickness of textiles, plastics, and similar materials.

Standard

Test Method for Measuring Mass (Weight) of Organic Trim Materials

2022-04-27

CURRENT

J860_202204

This SAE Standard is used to determine the mass per unit area, in grams per square meter, of materials used for trimming automobile interiors.

Standard

Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus

2022-10-13

CURRENT

J2020_202210

This test method specifies the operating conditions for a fluorescent ultraviolet (UV) and condensation apparatus used for the accelerated exposure of various automotive exterior components.