Standard
Spring 2022 Reaffirmation Ballot
2022-05-05
WIP
S2022DReaffirm
The documents listed in this ballot are being proposed for reaffirmation
Search Results
Standard
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
2021-06-28
CURRENT
AMS4128E
This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).
Standard
ALUMINUM BRONZE Silicon
1943-10-01
HISTORICAL
AMS4631
Standard
CAST MAGNESIUM ALLOY Solution Precipitation Heat Treated
1939-12-05
HISTORICAL
AMS4424
Standard
CAST MAGNESIUM ALLOY Solution Precipitation Heat Treated
1941-11-01
HISTORICAL
AMS4424A
Standard
MAGNESIUM ALLOY CASTINGS (Sand) 6 Al 3 Zn (Solution Precipitation)
1942-12-01
HISTORICAL
AMS4424B
Standard
MAGNESIUM ALLOY CASTINGS (Sand) 6 Al 3 Zn (Solution-Precipitation)
1944-08-01
HISTORICAL
AMS4424C
Standard
Test Method and Limits for Bow Height of Aluminum Sheet Samples After Chemical Milling
2021-11-02
CURRENT
AS6507
The results of this test are intended to be a useful indication of the resistance to distortion of bare or two-side Alclad, flat sheet aluminum used in chemical milling applications.
Standard
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T86) Solution Heat Treated, Cold Worked, and Artificially Aged
1994-06-01
HISTORICAL
AMS4318
This specification covers an aluminum alloy in the form of bars and rods 0.375 to 0.874 inch (9.52 to 22.20 mm) in nominal diameter or least distance between parallel sides.
Standard
Aluminum Alloy 6066, Bar, Rod, Shapes, Tube, and Wire, Extruded
1997-07-01
HISTORICAL
AMSQQA200/10
This specification covers the specific requirements for aluminum alloy 6066 bar, rod, shapes, tube, and wire produced by extrusion.
Standard
ALUMINUM ALLOY, 7011 ALCLAD 7178 PLATE AND SHEET
1997-08-01
HISTORICAL
AMSQQA250/28
This specification covers the specific requirements for 7178 aluminum alloy, 7011 alclad, plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable 7178 aluminum alloy core with thin layers of a 7011 aluminum alloy anodic to the core and of approximately equal thickness, bonded to both surfaces.
Standard
Copper-Nickel Alloy Wire and Ribbon 77.5Cr - 22.5Ni
1994-05-01
HISTORICAL
AMS4732C
This specification covers one type of copper-nickel alloy in the form of wire and ribbon.
Standard
COPPER-NICKEL ALLOY WIRE AND RIBBON 78Cu - 22Ni For Electronic Applications
1970-11-01
HISTORICAL
AMS4732
Standard
Bearings, Silver-Clad Steel Strip
1998-10-01
HISTORICAL
AMS4816C
This specification covers a low-alloy strip clad on one or both faces with silver in the form of bearing stock or finished bearings.
Standard
BEARINGS, SILVER-CLAD STEEL STRIP
1992-04-01
HISTORICAL
AMS4816B
This specification covers a low-alloy steel strip clad on one or both faces with silver in the form of bearing stock or finished bearings.
Standard
BEARINGS, SILVER CLAD STEEL STRIP
1955-03-01
HISTORICAL
AMS4816
Standard
BEARINGS, SILVER CLAD STEEL STRIP
1979-10-15
HISTORICAL
AMS4816A
This specification covers a low-alloy steel strip clad on one or both faces with silver in the form bearing stock or finished bearings.
Standard
BEARINGS 72 Copper 25 Lead 3 Tin Steel Backed Castings
1945-10-01
HISTORICAL
AMS4822A
Standard
BEARINGS - COPPER LEAD Steel Back
1940-01-22
HISTORICAL
AMS4822
Standard
BEARINGS, LEADED BRONZE 72Cu - 25Pb - 3Sn Steel Back
1951-06-01
HISTORICAL
AMS4822B
