Refine Your Search

Date

Date

Electrical systems Seats and seating Metals Public transportation systems Transportation Systems Airlines Electronic Engineering Committee

Search Results

Viewing 1 to 20 of 29
12Next >Last >>
Sort by published
Standard

CABIN CONNECTORS AND CABLES, PART 4, STANDARD TEST METHODOLOGY
2020-07-13
CURRENT
ARINC800P4-1
ARINC 800 is the first industry standard intended for characterization of aviation-grade high-speed (Gbps) Ethernet links. The test methods are based on realistic representation of cabin networks. The notional cabling architecture is based on IFE seat distribution using multiple intermediate disconnects. Sequential testing is supported by building up number of connectors in the link. Test guidelines for mixed intermediate cable lengths are provided.
Standard

CABIN PASSENGER SEAT PRODUCTION TESTING
2019-12-18
CURRENT
ARINC648
This report defines the requirements and recommended practices for production testing of aircraft passenger seats and seat groups. Production testing is performed at the seat manufacturers' facilities prior to the shipment of the seats to the airframe manufacturers, Maintenance, Repair, and Overhaul (MRO), or airlines/operators for installation in the aircraft. Using this guidance, rework is minimized and schedules remain minimally affected.
Standard

MARK 2 NETWORK SERVER SYSTEM (NSS) FORM AND FIT DEFINITION
2008-12-09
CURRENT
ARINC763A
This document defines both wired and wireless NSS components that enable the creation of airborne networks that are scalable, interchangeable, upgradeable, and remotely manageable with minimum cost. Aircraft equipment configurations and aircraft wiring recommendations are also described to allow aircraft network growth through the simple addition or replacement of NSS components. Hardware characteristics of standardized components are described without specifying equipment capacity or the operational functions of those components.
Standard

AERONAUTICAL MOBILE AIRPORT COMMUNICATION SYSTEM (AEROMACS) TRANSCEIVER AND AIRCRAFT INSTALLATION STANDARDS
2017-07-07
CURRENT
ARINC766
This documents defines the Installation Characteristics of an airborne radio transceiver capable of broadband wireless communication with an Airport Surface Network. The Aeronautical Mobile Airport Communications System (AeroMACS) Radio Unit (ARU) will operate in the aeronautical protected frequency of 5091 MHz to 5150 MHz, utilizing the IEEE 802.16e WiMAX protocol. It is intended to offload some of the congested narrowband VHF airport traffic used for ATS and AOC communications. ARU and Antenna Form, Fit, Function and Interfaces are described.
Standard

CABIN CONNECTORS AND CABLES PART 1 DESCRIPTION AND OVERVIEW
2012-11-19
CURRENT
ARINC800P1
This document is the first of a multi-part specification that will provide a catalog of cabin connector and cables that may be used in ARINC Standard cabin systems, including In-Flight Entertainment. Part 1 describes connector and cable requirements and evaluation criteria for the interface components used in the integration of cabin systems. Future releases will define connectors, contacts, and termination methods in Part 2. Cables will be specified in Part 3.
Standard

CABIN CONNECTORS AND CABLES PART 4 STANDARD TET METHODOLOGY
2015-12-01
CURRENT
ARINC800P4
ARINC 800 is the first industry standard intended for characterization of aviation-grade high-speed (Gbps) Ethernet links. The test methods are based on realistic representation of cabin networks. The notional cabling architecture is based on IFE seat distribution using multiple intermediate disconnects. Sequential testing is supported by building up number of connectors in the link. Test guidelines for mixed intermediate cable lengths are provided.
Standard

FIBER OPTIC CONNECTORS
2013-06-06
CURRENT
ARINC801-3
ARINC 800 is the first industry standard intended for characterization of aviation-grade high-speed (Gbps) Ethernet links. The test methods are based on realistic representation of cabin networks. The notional cabling architecture is based on IFE seat distribution using multiple intermediate disconnects. Sequential testing is supported by building up number of connectors in the link. Test guidelines for mixed intermediate cable lengths are provided.
Standard

GATE-AIRCRAFT TERMINAL ENVIRONMENT LINK (GATELINK)-AIRCRAFT SIDE
1994-01-01
CURRENT
ARINC751
This standard describes the electrical and optical interface definitions for Gatelink communications. Gatelink is a 100 Mbps full-duplex communication link between a communication system inside the airport terminal (or at the maintenance position) and a communication system onboard a parked aircraft.
Standard

SPECIFICATION CONNECTORS, RACK AND PANEL, RECTANGULA REAR RELEASE CRIMP CONTACTS
2015-06-01
CURRENT
ARINC404B-2
This document defines standardized connectors intended for use on rack-mountable avionics equipment. It is aligned to the latest version of MIL-C-81659. Supplement 2 was updated to support cabin equipment applications. It corrects intermateability control dimensions that are provided for single shell plug connectors.
Standard

GUIDANCE FOR AIRCRAFT ELECTRICAL POWER UTILIZATION AND TRANSIENT PROTECTION
1989-10-01
CURRENT
ARINC413A
This standard provides guidance to airframe manufacturers concerning the utilization of aircraft electrical power. This standard covers the description of basic power characteristics, and detailed guidance concerning transient protection, interference control, and equipment installation considerations.
Standard

CABIN EQUIPMENT INTERFACES PART 4B CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM CABIN DISTRIBUTION SYSTEM - STAR WIRING
1999-06-18
CURRENT
ARINC628P4B
Cabin equipment interfaces Part 4B is similar to description provided for Part 4A. The significant difference is that Part 4B specifies a CDS using a star wiring topology. Standardized wiring, connectors and installation requirements for a passenger seat network, overhead video network, and cabin management equipment network are included. Electrical and fiber optic networks are covered.
Standard

CABIN EQUIPMENT INTERFACES PART 4A CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM CABIN DISTRIBUTION SYSTEM DAISY CHAIN
2005-02-28
CURRENT
ARINC628P4A-3
Cabin equipment interfaces use a standardized wiring topology defined in Part 4A. This standard defines a standard CDS using a daisy chain wiring topology. This standard defines standard wiring, connectors and installation requirements for a passenger seat network, overhead video network, and cabin management equipment network. Electrical and fiber optic networks are covered.
Standard

CABIN EQUIPMENT INTERFACES PART 2 CABIN MANAGEMENT AND ENTERTAINMENT SYSTEM - SEAT INTERFACES
2017-07-10
CURRENT
ARINC628P2-9
This document defines standard electrical and mechanical interfaces of the In-Flight Entertainment System (IFES) equipment associated with the seat (including the headphones, passenger control unit, seat video display, personal video player, telephone hand set, and seat electronics box). Supplement 9 updates applicable interfaces for USB 3.1 outlets in passenger seats.
Standard

CABIN EQUIPMENT INTERFACES PART 5 CABIN ELECTRICA EQUIPMENT AND WIRING INSTALLATION GUIDELINES
2013-06-14
CURRENT
ARINC628P5-3
ARINC Specification 628, Cabin Equipment Interfaces (CEI) Part 5 Parts Selection, Wire Design and Installation Guidelines, provides design and mounting guidelines for electrical installations, mainly for supplier of cabin furnishing equipment. Part 5 addresses several aspects of installation and is divided into five sections: Introduction, Parts Selection, Electrical Wire Design Guidelines, Wire Installation Guidelines, and Documentation Guidelines. Guidelines regarding design, safety, and other subjects relevant to acceptance of the end item are addressed. Notes explaining the reason for setting a guideline or suggesting methods for performing the task are provided in commentary. The content of the document is designed to make it usable for reference by industry, particularly manufacturers of seats and equipment.
Standard

EMBEDDED INTERCHANGE FORMAT FOR AIRPORT MAPPING DATABASE
2016-08-31
CURRENT
ARINC816-2C1
This document defines an open encoding format for airport databases which are loaded in airborne systems. This format, when designed and implemented, will enable a quick, economic, and efficient use of AMDB. However, since industry does not require applications to be standardized, data interpretation is not addressed in this document.
Standard

EMBEDDED INTERCHANGE FORMAT FOR AIRPORT MAPPING DATABASE
2007-11-19
CURRENT
ARINC816-1
This document defines an open encoding format for airport databases which are loaded in airborne systems. This format, when designed and implemented, will enable a quick, economic, and efficient use of AMDB. However, since industry does not require applications to be standardized, data interpretation is not addressed in this document.
Standard

3GCN - SEAT DISTRIBUTION SYSTEM
2014-08-15
CURRENT
ARINC809-3
This specification defines general architectural philosophy and specific design guidance for the proper installation and interface of various cabin equipment within the seats. Consistency with this specification allows each component installed on the seat to operate in concert when integrated with other relevant cabin type equipment. Standard electrical and mechanical interfaces of the In- Flight Entertainment System (IFES) equipment for the 3rd Generation Cabin Network (3GCN) associated with the seat are defined. This equipment consists of the headphone jacks (HPJ), passenger control unit (PCU)/multi function handset (including the cord), seat video display (SVD), remote data outlet (RDO), integrated seat box (ISB) which includes the seat power box (SPB)/seat data box (SDB), remote power outlet (RPO), and in-seat cables. Appropriate definitions are also provided for other electrical devices associated with the seat control/position mechanism.
12Next >Last >>
X