Search Results

Standard

Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching

2021-06-28

AMS4128E

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).

Standard

ALUMINUM SHEET, LAMINATED Edge Bonded

1979-07-01

AMS4012D

This specification covers an aluminum or aluminum alloy in the form of sheet, laminated and edge bonded.

Standard

Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed

2016-05-17

AMS4321B

This specification covers an aluminum alloy in the form of die forgings, hand forgings, and forging stock.

Standard

ALUMINUM ALLOY FORGINGS 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed

1992-04-01

AMS4321

This specification covers an aluminum alloy in the form of die forgings and hand forgings.

Standard

Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed

2010-05-19

AMS4321A

This specification covers an aluminum alloy in the form of die forgings, hand forgings, and forging stock.

Standard

Test Method and Limits for Bow Height of Aluminum Sheet Samples After Chemical Milling

2021-11-02

AS6507

The results of this test are intended to be a useful indication of the resistance to distortion of bare or two-side Alclad, flat sheet aluminum used in chemical milling applications.

Standard

Magnesium Alloy Castings Sand 9 Al 2 Zn as Cast

2002-12-16

AMS4430

Standard

Magnesium Alloy Castings, Sand 6ce Solution and Precipitation Treated

2002-12-16

AMS4428

Standard

ALUMINUM ALLOY DIE FORGINGS 4.0Mg - 1.3Li - 1.2C - 0.4502 (5091) Mechanically Alloyed, As-Fabricated

1992-07-01

AMS4322

This specification covers an aluminum alloy in the form of die forgings and forging stock.

Standard

ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T86) Solution Heat Treated, Cold Worked, and Artificially Aged

1994-06-01

AMS4318

This specification covers an aluminum alloy in the form of bars and rods 0.375 to 0.874 inch (9.52 to 22.20 mm) in nominal diameter or least distance between parallel sides.

Standard

Aluminum Alloy-Aramid Fiber Reinforced-Laminated Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61) 3, 5, 7, or 9 Ply

2001-11-28

AMS4253A

This specification covers aluminum alloy sheet laminated with one or more layers of unidirectional aramid fiber/epoxy prepreg.

Standard

ALUMINUM ALLOY-ARAMID FIBER REINFORCED-LAMINATED SHEET 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T61) 3, 5, 7, or 9 Ply

1994-04-01

AMS4253

This specification covers aluminum alloy sheet laminated with one or more layers of unidirectional aramid fiber/epoxy prepreg.

Standard

Magnesium Alloy Castings, Heat Treatment of

1998-02-01

AMSM6857

This specification covers the requirements for the heat treatment of magnesium alloy castings. This specification covers furnace equipment requirements, and general information for heat treating procedures and heat treating temperatures for magnesium alloys.

Standard

Aluminum Alloy 5456, Plate and Sheet, for Sea Water Applications

1998-06-01

AMSQQA250/20

This specification covers the specific requirements for aluminum alloy 5456 plate and sheet for applications requiring a weldable moderate strength alloy having comparatively good corrosion resistance.

Standard

Aluminum Alloy 5086, Plate and Sheet for Sea Water Applications

2006-08-03

AMSQQA250/19A

This specification covers the specific requirements for aluminum alloy 5086, plate and sheet for applications requiring a weldable moderate strength alloy having comparatively and corrosive resistance.

Standard

Aluminum Alloy 5086, Plate and Sheet for Sea Water Applications

1998-06-01

AMSQQA250/19

This specification covers the specific requirements for aluminum alloy 5086, plate and sheet for applications requiring a weldable moderate strength alloy having comparatively and corrosive resistance.

Standard

ALUMINUM ALLOY, 7178-T76, ALCLAD PLATE AND SHEET, IMPROVED EXFOLIATION RESISTANT

1997-08-01

AMSQQA250/22

This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.

Standard

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant

2012-04-04

AMSQQA250/22B

This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.

Standard

Aluminum Alloy, 7178-T76, Alclad Plate and Sheet, Improved Exfoliation Resistant

1998-09-01

AMSQQA250/22A

This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.

Standard

Aluminum Alloy 5456, Plate and Sheet, for Sea Water Applications

2006-08-03

AMSQQA250/20A

This specification covers the specific requirements for aluminum alloy 5456 plate and sheet for applications requiring a weldable moderate strength alloy having comparatively good corrosion resistance.