Search Results

Standard

Commercial Literature Specifications - Off-Road Work Machines

2011-10-25

CURRENT

J1233_201110

This standard is applicable to off-road work machines - base machine and its equipment included in categories 1.1, 1.2, 2, 4, and 5 of SAE J1116.

Standard

IDENTIFICATION TERMINOLOGY—PIPELAYERS

1980-06-01

HISTORICAL

J1295_198006

This standard applies to machines which are designed to raise, lower, and carry pipe and loads of similar nature. The term pipelayer does not include tractors or loaders with side booms which are optional attachments, manufacturer or dealer-installed, to machines as defined in SAE J1057. Note: Some related standards will apply equally to pipelayers and to tractors and loaders with side boom. Two such standards are SAE J743 and ANSI B30.14.

Standard

CAPACITY RATING—DUMPER BODY AND TRAILER BODY

1995-11-01

HISTORICAL

J1363_199511

This SAE Standard applies to dumper bodies as defined in SAE J1016 and dumper trailers as defined in SAE J734. It is similar to ISO 6483.

Standard

CAPACITY RATING - DUMPER BODY AND TRAILER BODY

1985-01-01

HISTORICAL

J1363_198501

This standard applies to dumper bodies as defined in SAE J1016 and dumper trailers as defined in SAE J734. It is similar to ISO/DIS 6483.

Standard

LOADING ABILITY TEST CODE—SCRAPERS

1977-06-01

HISTORICAL

J764_197706

The code applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See J1116 and J1057a.) The loading procedure is limited to standing starts in order to reduce the number of variables that are difficult to control and measure. Because of the difficulties in controlling some of the other variables, meaningful numerical comparison of time and load from scraper to scraper requires that data be taken at the same time and place, and that the units being compared be of approximately equal capacity.

Standard

LOADING ABILITY TEST CODE--SCRAPERS

1985-11-01

HISTORICAL

J764_198511

The code applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.) The loading procedure is limited to standing starts in order to reduce the number of variables that are difficult to control and measure. Because of the difficulties in controlling some of the other variables, meaningful numerical comparison of time and load from scraper to scraper requires that data be taken at the same time and place, and that the units being compared be of approximately equal capacity.

Standard

Loading Ability Test Procedure—Scrapers

2006-02-05

HISTORICAL

J764_200602

This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)

Standard

LOADING ABILITY TEST PROCEDURE—SCRAPERS

1995-08-01

HISTORICAL

J764_199508

This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)

Standard

LIFT CAPACITY CALCULATION AND TEST PROCEDURE PIPELAYER AND SIDEBOOM

1992-03-01

HISTORICAL

J743_199203

This SAE Standard describes a method to calculate and a test procedure to validate rated lift capacity as presented in commercial literature for pipelayers and tractors or loaders (wheel or crawler), equipped with a hydraulic or mechanically operated sideboom. Rated lift capacity considers hoist mechanism limits, tipping loads, and rope factor. After the lift capacity is validated by testing, a reduction factor is applied to establish the rated lift capacity for the specific pipelayer or sideboom configuration.

Standard

Lift Capacity Calculation and Test Procedure Pipelayer and Sideboom

2000-06-01

HISTORICAL

J743_200006

This SAE Standard describes a method to calculate and a test procedure to validate rated lift capacity as presented in commercial literature for pipelayers and tractors or loaders (wheel or crawler), equipped with a hydraulic or mechanically operated sideboom. Rated lift capacity considers hoist mechanism limits, tipping loads, and rope factor. After the lift capacity is validated by testing, a reduction factor is applied to establish the rated lift capacity for the specific pipelayer or sideboom configuration.

Standard

SIDE BOOMS—TRACTOR MOUNTED

1979-03-01

HISTORICAL

J743B_197903

Standard

PIPELAYERS AND SIDE BOOMS, TRACTOR-MOUNTED--SPECIFICATIONS AND TEST

1986-05-01

HISTORICAL

J743_198605

Standard

COMPONENT NOMENCLATURE—CONSTRUCTION TWO- AND FOUR-WHEEL TRACTORS

1984-07-01

HISTORICAL

J869_198407

Standard

NOMENCLATURE–TWO AND FOUR WHEEL TRACTORS

1975-08-01

HISTORICAL

J869A_197508

Standard

DRAG FORCE TEST PROCEDURE FOR CONSTRUCTION, FORESTRY, AND INDUSTRIAL MACHINES

1986-02-01

HISTORICAL

J873_198602

This SAE Standard specifies a test method to measure drag loss of self-propelled, as well as towed, construction, forestry and industrial machines, with or without payload, as listed in SAE J1057 and J1116. Drag force is measured as a function of travel speed.

Standard

DRAG FORCE TEST PROCEDURE FOR CONSTRUCTION, FORESTRY, AND INDUSTRIAL MACHINES

1995-02-01

HISTORICAL

J873_199502

This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J1057 and J1116. Drag force is measured as a function of travel speed.

Standard

Drag Force Test Procedure for Construction, Forestry, and Industrial Machines

2003-09-30

HISTORICAL

J873_200309

This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.

Standard

Drag Force Test Procedure for Construction, Forestry, and Industrial Machines

2007-05-07

HISTORICAL

J873_200705

This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.

Standard

Drag Force Test Procedure for Construction, Forestry, and Industrial Machines

2011-10-27

CURRENT

J873_201110

This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.

Standard

DRAWBAR TEST PROCEDURE FOR CONSTRUCTION, FORESTRY, AND INDUSTRIAL MACHINES

1986-05-01

HISTORICAL

J872_198605

This SAE Standard specifies a test method to measure the drawbar pull performance of self-propelled construction, forestry, and industrial machines and their combinations with mounted and/or trailed equipment, with or without payload, as listed in SAE J1116. It covers the following criteria measured against travel speed: drawbar pull, drawbar power, and wheel or track slip.