Standard
Spring 2022 Reaffirmation Ballot
2022-05-05
WIP
S2022DReaffirm
The documents listed in this ballot are being proposed for reaffirmation
Search Results
Standard
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
2021-06-28
CURRENT
AMS4128E
This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).
Standard
ALUMINUM BRONZE RODS, BARS, AND FORGINGS 90.5Cu - 7.5Al - 1.9Si
1978-01-15
HISTORICAL
AMS4631D
This specification covers one type of aluminum bronze in the form of rods, bars, forgings, and forging stock.
Standard
Aluminum Bronze Rods, Bars, and Forgings 90.5Cu - 7.5Al - 1.95: Stress Relieved
2011-11-03
HISTORICAL
AMS4631E
This specification covers one type of aluminum bronze in the form of rods, bars, forgings, and forging stock.
Standard
Aluminum Bronze Rods, Bars, and Forgings 90.5Cu - 7.5Al - 1.95: Stress Relieved
2017-05-25
CURRENT
AMS4631F
This specification covers one type of aluminum bronze in the form of rods, bars, forgings, and forging stock.
Standard
Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed
2016-05-17
CURRENT
AMS4321B
This specification covers an aluminum alloy in the form of die forgings, hand forgings, and forging stock.
Standard
Aluminum Sheet, Laminated Edge Bonded
2014-07-28
CURRENT
AMS4012G
This specification covers an aluminum or aluminum alloy in the form of sheet, laminated and edge bonded.
Standard
MAGNESIUM ALLOY CASTINGS, SAND 6.0Al - 3.0Zn (AZ63-T6) Solution and Precipitation Heat Treated
1980-01-15
HISTORICAL
AMS4424H
This specification covers a magnesium alloy in the form of sand castings.
Standard
SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS Determination of
1981-07-01
HISTORICAL
ARP1704
This method covers the determination of the fracture toughness of metallic materials (KSR or KSB) by testing slotted short-rod or short-bar specimens.
Standard
Test Method and Limits for Bow Height of Aluminum Sheet Samples After Chemical Milling
2021-11-02
CURRENT
AS6507
The results of this test are intended to be a useful indication of the resistance to distortion of bare or two-side Alclad, flat sheet aluminum used in chemical milling applications.
Standard
ALUMINUM ALLOY, HAND FORGINGS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
1997-01-01
HISTORICAL
MAM4323A
This specification covers an aluminum alloy in the form of hand forgings procured to metric dimensions.
Standard
ALUMINUM ALLOY PLATE 2.7Cu - 2.2Li - 0.12Zr (2090-T81) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
1987-07-01
HISTORICAL
AMS4346
This specification covers an aluminum alloy in the form of plate.
Standard
Solder 97.5pb 1.5ag 1sn
1997-03-01
CURRENT
AMS4756A
This specification covers wire, strip, bars, pigs, or as ordered. Alloy: 1.5 Sn Solder UNS Number: L50131
Standard
ALUMINUM ALLOY ALCLAD 7178, PLATE AND SHEET
1997-08-01
HISTORICAL
AMSQQA250/15
This specification covers the specific requirements for 7178 aluminum alloy alclad plate and sheet; the general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness bonded to both surfaces.
Standard
ALUMINUM ALLOY, 7178-T76, ALCLAD PLATE AND SHEET, IMPROVED EXFOLIATION RESISTANT
1997-08-01
HISTORICAL
AMSQQA250/22
This specification covers the specific requirements for improved exfoliation resistant alclad aluminum alloy 7178-T76 sheet and -T7651 plate. The general requirements are covered in AMS-QQ-A-250. The plate and sheet covered by this specification shall be an integral composite product consisting of a heat-treatable aluminum alloy (7178) core with thin layers of an aluminum alloy (7072) anodic to the core and of approximately equal thickness, bonded to both surfaces.
Standard
Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant
2014-02-14
CURRENT
AMSQQA250/21C
This specification covers the specific requirements for improved exfoliation-resistant aluminum alloy, 7178-T76 sheet and 7178-T7651 plate.
Standard
ALUMINUM ALLOY, 7178-T76, PLATE AND SHEET IMPROVED EXFOLIATION RESISTANT
1997-08-01
HISTORICAL
AMSQQA250/21
This specification covers the specific requirements for improved exfoliation-resistant aluminum alloy, 7178-T76 sheet and 7178-T7651 plate.
Standard
Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant
2012-04-04
HISTORICAL
AMSQQA250/21B
This specification covers the specific requirements for improved exfoliation-resistant aluminum alloy, 7178-T76 sheet and 7178-T7651 plate.
Standard
Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant
1998-09-01
HISTORICAL
AMSQQA250/21A
This specification covers the specific requirements for improved exfoliation-resistant aluminum alloy, 7178-T76 sheet and 7178-T7651 plate.
Standard
IDENTIFICATION Aluminum and Magnesium Alloy Wrought Products
1989-10-01
HISTORICAL
AMS2811
This specification covers procedures for identifying wrought products of aluminum and magnesium alloys.
