Search Results

Standard

Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching

2021-06-28

CURRENT

AMS4128E

This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).

Standard

Aluminum Alloy, Bars, Rolled Drawn, Or Cold Finished 4.4cu 1.5mg 0.60mn Stress-Relief Stretched

1990-01-01

CURRENT

AMS4119F

Standard

Aluminum Alloy, Rolled or Cold Finished Bars and Rods, 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T86) Solution Heat Treated, Cold Worked, and Artificially Aged

2005-02-11

CURRENT

AMS4318A

This specification covers an aluminum alloy in the form of bars and rods 0.375 to 0.874 inch (9.52 to 22.20 mm) in nominal diameter or least distance between parallel sides.

Standard

SOLDER 97.5Pb - 1.5Ag - 1Sn

1987-01-01

HISTORICAL

AMS4756

Standard

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 6262

2007-06-18

CURRENT

AMSQQA225/10A

This specification covers the specific requirements for 6262 aluminum alloy bar, rod, and wire produced by rolling, drawing or cold finishing.

Standard

Aluminum Alloy, Bar, Rod, and Wire, Rolled, Drawn, or Cold Finished, 3003

2007-04-13

CURRENT

AMSQQA225/2A

This specification covers the specific requirements for 3003 aluminum alloy bar, rod, and wire produced by rolling, drawing, or cold finishing.

Standard

ALUMINUM RIVETS 99AL (2S-H14)

1952-06-01

HISTORICAL

AMS7220B

Standard

ALUMINUM RIVETS 99Al (1100-H14)

1961-07-01

HISTORICAL

AMS7220C

Standard

ALUMINUM ALLOY FOIL 5.0Mg - 0.12Mn - 0.12Cr (5056-H191) Strain Hardened

1982-10-01

HISTORICAL

AMS4005A

This specification covers an aluminum alloy in the form of foil.

Standard

ALUMINUM ALLOY FOIL 5.0Mg - 0.12Mn - 0.12Cr (5056-H191) Strain Hardened

1989-07-01

HISTORICAL

AMS4005B

This specification covers an aluminum alloy in the form of foil.

Standard

ALUMINUM ALLOY FOIL 5.0Mg - 0.12Mn - 0.12Cr (5056-H191)

1969-11-01

HISTORICAL

AMS4005

Standard

ALUMINUM ALLOY FOIL 4.4Cu - 1.5Mg - 0.60Mn (2024-0)

1987-04-01

HISTORICAL

AMS4007B

This specification covers an aluminum alloy in the form of foil.

Standard

ALUMINUM ALLOY FOIL 4.4Cu - 1.5Mg - 0.60Mn (2024-0)

1980-01-01

HISTORICAL

AMS4007A

This specification covers an aluminum alloy in the form of foil.

Standard

ALUMINUM ALLOY FOIL 4.4Cu - 1.5Mg - 0.60Mn (2024-0)

1974-03-01

HISTORICAL

AMS4007

This specification covers an aluminum-base alloy in the form of foil.

Standard

ALUMINUM ALLOY FOIL 5.0Mg - 0.12Mn - 0.12Cr (5056-H191) Strain Hardened

1994-05-01

HISTORICAL

AMS4005C

This specification covers an aluminum alloy in the form of foil.

Standard

Aluminum Alloy, Foil, 5.0Mg - 0.12Mn - 0.12Cr (5056-H191), Strain Hardened

2006-06-21

CURRENT

AMS4005D

This specification covers an aluminum alloy in the form of foil.

Standard

COPPER SILICON BRONZE Seamless Tubing

1941-09-01

HISTORICAL

AMS4665

Standard

SOLDER, LEAD-SILVER 94Pb - 5.5Ag

1987-01-01

HISTORICAL

AMS4755A

Standard

SILVER ALLOY BRAZING FILLER METAL 56Ag - 22Cu - 17Zn - 5.0Sn 1152 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range

1992-04-01

HISTORICAL

AMS4789

This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips, and a viscous mixture (paste) of powder in a suitable binder.

Standard

Bearings - Cast Silver Steel Back

1942-08-01

CURRENT

AMS4817

1. ACKNOWLEDGMENT: A vendor must mention this specification number in all quotations and when acknowledging purchase orders. 2. FORM: This bearing shall consist of silver cast on a steel back.