Search Results

Standard

Design, Layout, Criteria - Plastic Integrally Lighted Panels

2007-09-27

HISTORICAL

ARP498B

This document is intended to cover the design of plastic lighted panels, mounting plates, and their installation.

Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

1998-07-01

HISTORICAL

AS4156A

This document defines the method for voltage identification by the use of color-coded insulators at the base of the lamp. Table 1 shows the design volts and corresponding insulator colors. The part numbers shown are for example purposes only. Insulator colors are to be easily distinguishable as green, yellow, red, and white. Additional colors may be added by a revision process as required.

Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

2020-03-12

CURRENT

AS4156C

This document specifies that black is the only color that can be used for the insulator at the bottom of the base of T-1 and T-1 ¾ Flanged Base lamps.

Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

2012-12-06

HISTORICAL

AS4156B

This document defines the method for voltage identification by the use of color-coded insulators at the base of the lamp. Table 1 shows the design volts and corresponding insulator colors. The part numbers shown are for example purposes only. Insulator colors are to be easily distinguishable as green, yellow, red, and white. Additional colors may be added by a revision process as required.

Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

2006-11-07

HISTORICAL

ARP4156B

This document defines the method for voltage identification by the use of color-coded insulators at the base of the lamps. Table 1 shows the design volts and corresponding insulator colors. The part numbers shown are for example purposes only, as an option. Insulator colors are to be easily distinguishable as green, yellow, red, and white. Additional colors may be added by a revision process as required.

Standard

Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification

2015-05-07

CURRENT

ARP4156C

This document defines the method for voltage identification by the use of color-coded insulators at the base of the lamps. Table 1 shows the design volts and corresponding insulator colors. The part numbers shown are for example purposes only, as an option. Insulator colors are to be easily distinguishable as green, yellow, red, and white. Additional colors may be added by a revision process as required.

Standard

Night Vision Goggle (NVG) Filters

2006-02-28

HISTORICAL

ARP4169A

This SAE Aerospace Recommended Practice (ARP) discusses the desired characteristics of night vision goggle (NVG) filters that can be used with incandescent, electroluminescent (EL) and light emitting diode (LED) light sources to achieve NVG compatible lighting of aerospace crew stations. This document also discusses the parameters that need to be considered when selecting a night vision goggle/daylight viewing (NVG/DV) filter for proper contrast enhancement to achieve readability in daylight. The recommendations set forth in this document are to aid in the design of NVG compatible lighting that will meet the requirements of MIL-L-85762A.

Standard

Night Vision Goggle (NVG) Filters

2014-02-27

CURRENT

ARP4169B

This SAE Aerospace Recommended Practice (ARP) discusses the desired characteristics of night vision goggle (NVG) filters that can be used with incandescent, electroluminescent (EL) and light emitting diode (LED) light sources to achieve NVG compatible lighting of aerospace crew stations. This document also discusses the parameters that need to be considered when selecting a night vision goggle/daylight viewing (NVG/DV) filter for proper contrast enhancement to achieve readability in daylight. The recommendations set forth in this document are to aid in the design of NVG compatible lighting that will meet the requirements of MIL-L-85762A and MIL-STD-3009.

Standard

Night Vision Goggle (NVG) Filters

2021-03-18

WIP

ARP4169C

This SAE Aerospace Recommended Practice (ARP) discusses the desired characteristics of night vision goggle (NVG) filters that can be used with incandescent, electroluminescent (EL) and light emitting diode (LED) light sources to achieve NVG compatible lighting of aerospace crew stations. This document also discusses the parameters that need to be considered when selecting a night vision goggle/daylight viewing (NVG/DV) filter for proper contrast enhancement to achieve readability in daylight. The recommendations set forth in this document are to aid in the design of NVG compatible lighting that will meet the requirements of MIL-L-85762A and MIL-STD-3009.

Standard

Lights, Instrument, Individual, General Specification For

2010-01-08

HISTORICAL

AS50571A

This specification covers the general requirements for red and white individual instrument lights. This document has been streamlined. Appendix A to MIL-L-5057F lists those documents required for MIL-L-5057F acquisition and is a mandatory part of MIL-L-5057F. Those documents listed in Appendix A have the same status as those referenced directly in MIL-L-5057F (first tier documents). All other documents, referenced through tiering, may be used as guidance and information to supplement MIL-L-5057F. This document’s scope is limited to lamp source designs solely. Furthermore, the use of red lighting should not be considered for new design and included within this document to support requirements for existing military aircraft that still operate with this system of lighting.

Standard

Lights, Instrument, Individual, General Specification For

2016-03-16

CURRENT

AS50571B

This specification covers the general requirements for red and white individual instrument lights. This document has been streamlined. Appendix A to MIL-L-5057F lists those documents required for MIL-L-5057F acquisition and is a mandatory part of MIL-L-5057F. Those documents listed in Appendix A have the same status as those referenced directly in MIL-L-5057F (first tier documents). All other documents, referenced through tiering, may be used as guidance and information to supplement MIL-L-5057F. This document’s scope is limited to lamp source designs solely. Furthermore, the use of red lighting should not be considered for new design and included within this document to support requirements for existing military aircraft that still operate with this system of lighting.

Standard

Lighting, Integral, For Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments

2006-08-23

HISTORICAL

ARP582C

This SAE Aerospace Recommended Practice (ARP) covers the general requirements and test procedures for illuminating systems for integrally lighted aircraft instruments in order to provide (a) uniformity of illumination within each instrument, (b) legibility of instrument presentation under daylight or integral light, and (c) uniformity of illumination between instrument displays.

Standard

Lighting, Integral, For Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments

2012-04-04

CURRENT

ARP582D

This SAE Aerospace Recommended Practice (ARP) covers the general requirements and test procedures for illuminating systems for integrally lighted aircraft instruments in order to provide (a) uniformity of illumination within each instrument, (b) legibility of instrument presentation under daylight or integral light, and (c) uniformity of illumination between instrument displays.

Standard

Aircraft Indicating Systems Optical Performance

2021-06-01

CURRENT

ARP1088C

This ARP is intended to cover the warning, caution, and advisory indicating system required for commercial and military aerospace vehicles.

Standard

Aircraft Indicating Systems

2015-08-14

HISTORICAL

ARP1088B

This ARP is intended to cover the warning, caution and advisory indicating system required for commercial and military aerospace vehicles.

Standard

Panels, Information, Integrally Illuminated

2011-04-01

CURRENT

AS7788A

This specification covers the general requirements for integrally illuminated information panels.

Standard

Lamps for Aircraft Lighting

2013-10-08

CURRENT

ARP881F

This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.

Standard

Lamps for Aircraft Lighting

2007-07-09

HISTORICAL

ARP881E

This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.

Standard

Night Vision Imaging Systems (NVIS) Integrally Illuminated Information Panels

2018-10-10

HISTORICAL

ARP4967B

This document is intended to highlight critical design issues that a panel designer should understand when designing panels for NVIS applications. It is not intended to be a discussion of the benefits of one lighting technology versus another. See ARP4168 for a more complete discussion of these lighting technologies.

Standard

Night Vision Imaging Systems (NVIS) Integrally Illuminated Information Panels

2007-03-12

HISTORICAL

ARP4967A

This document is intended to highlight critical design issues that a panel designer should understand when designing panels for NVIS applications. It is not intended to be a discussion of the benefits of one lighting technology versus another. See ARP4168 for a more complete discussion of these lighting technologies.