Search Results

Standard

Component Nomenclature--Dumpers

2000-06-28

CURRENT

J1016_200006

This SAE Standard provides names of major components peculiar to dumpers as defined in SAE J1057 (See Figure 1). Illustrations of components are not intended to be exactly descriptive of any particular machine. For component nomenclature for dumper trailers, refere to SAE J734.

Standard

Hydraulic Excavator Operator Controls

2019-06-06

CURRENT

J1177_201906

This standard covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls. This standard applies to mobile hydraulic excavators as described in ISO 7135—Earthmoving machinery—Hydraulic excavators—Terminology and commercial specifications, and ISO 6165—Earthmoving machinery—Basic types—Vocabulary.

Standard

FORMAT FOR COMMERCIAL LITERATURE SPECIFICATIONS—OFF-ROAD WORK MACHINES

1978-06-01

HISTORICAL

J1233_197806

This practice applies to certain off-road self-propelled work machines referenced in SAE J1116. It applies to most machines defined in SAE J1057a.

Standard

COMMERCIAL LITERATURE SPECIFICATIONS—OFF-ROAD WORK MACHINES

1985-01-01

HISTORICAL

J1233_198501

This standard is applicable to off-road work machines - base machine and its equipment included in categories 1.1, 1.2, 2, 4, and 5 of SAE J1116.

Standard

SPECIFICATION DEFINITIONS—OFF-ROAD WORK MACHINES

1985-01-01

HISTORICAL

J1234_198501

This standard is applicable to off-road work machines, base machine and its equipment, included in categories 1.1, 1.2, 2, 3, and 5 of J1116.

Standard

SPECIFICATION DEFINITIONS-OFF-ROAD WORK MACHINES

1978-06-01

HISTORICAL

J1234_197806

This standard defines the more commonly used terms applicable to the majority of the machines defined in SAE J1057a and/or referenced by category in SAE J1116. Other SAE Standards will be used, when necessary, to define terms peculiar to a certain class or type of machine. Such other standards will be in accord with SAE J1234.

Standard

Commercial Literature Specifications - Off-Road Work Machines

2011-10-25

CURRENT

J1233_201110

This standard is applicable to off-road work machines - base machine and its equipment included in categories 1.1, 1.2, 2, 4, and 5 of SAE J1116.

Standard

Nomenclature - Hydraulic Backhoes

2018-11-20

HISTORICAL

J326_201811

This SAE standard includes hydraulic backhoes which have no more than 190 degrees of rotational swing and are mounted on wheeled tractors and crawler tractors. Illustrations used are not intended to include all existing commercial machines or to be exact descriptions of any particular machine. The illustrations have been chosen to describe the principles to be used in applying this standard.

Standard

Nomenclature - Hydraulic Backhoes

2012-11-01

HISTORICAL

J326_201211

This SAE Standard includes hydraulic backhoes which have no more than 190 degrees of rotational swing, and are mounted on wheel tractors and crawler tractors. Illustrations used are not intended to include all existing commercial machines or to be exact descriptions of any particular machine. The illustrations have been chosen to describe the principles to be used in applying this standard.

Standard

Machine Slope Operation Test Code

2003-05-12

CURRENT

J897_200305

This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116. Purpose This Standard provides a field procedure to determine the ability of a machine to operate statically and dynamically on sloping surfaces. Depending upon the objective of the test, any item listed as specified is to be selected at the discretion of either the manufacturer, the test agency, the owner, or a combination of these parties.

Standard

MACHINE SLOPE OPERATION TEST CODE

1985-10-01

HISTORICAL

J897_198510

This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116.

Standard

MACHINE SLOPE OPERATION TEST CODE

1978-05-01

HISTORICAL

J897_197805

This code applies to mobile work machines and their combinations with mounted and/or trailed equipment.

Standard

Capacity Rating--Elevating Scrapers

2003-05-12

CURRENT

J957_200305

This SAE Standard specifies a procedure for approximating the volume of a typical material carried in the bowl of an elevating scraper as defined in SAE J728 and SAE J1057. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.

Standard

IDENTIFICATION TERMINOLOGY AND SPECIFICATION DEFINITIONS—PIPELAYERS AND SIDE BOOMS, TRACTOR OR LOADER MOUNTED

1989-06-01

HISTORICAL

J1295_198906

This is applicable to pipelayers and side booms, mounted on tractors or loaders defined in SAE J1057. Only those terms not covered by SAE J1234 are described herein.

Standard

IDENTIFICATION TERMINOLOGY AND SPECIFICATION DEFINITIONS - PIPELAYERS AND SIDE BOOMS, TRACTOR OR LOADER MOUNTED

1986-11-01

HISTORICAL

J1295_198611

This is applicable to pipelayers and side booms, mounted on tractors or loaders defined in SAE J1057.

Standard

Travel Performance and Rating Procedure, Crawler Mounted Hydraulic Excavators, Material Handlers, Knuckle Boom Log Loaders, and Certain Forestry Equipment

2012-01-06

CURRENT

J1309_201201

This SAE Standard describes a uniform method to calculate and specify travel performance characteristics of hydraulic excavators, material handlers, knuckle boom log loaders, delimbers, feller bunchers, harvesters, processors, and other knuckle boom material handlers. It establishes definitions and specifies machine conditions for calculations and tests. This document applies to crawler mounted machines such as hydraulic excavators as defined in SAE J/ISO 6165 and ISO 7135, and knuckle boom log loaders as defined in SAE J1209 and SAE J2055. This document also applies to certain forestry equipment defined in SAE J1209 and ISO 6814 that have crawler mountings such as delimbers, feller bunchers, harvesters, and processors. Included in the definition of hydraulic excavators are also front shovel, clamshell, and telescoping boom excavators.

Standard

LOADING ABILITY TEST CODE--SCRAPERS

1985-11-01

HISTORICAL

J764_198511

The code applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.) The loading procedure is limited to standing starts in order to reduce the number of variables that are difficult to control and measure. Because of the difficulties in controlling some of the other variables, meaningful numerical comparison of time and load from scraper to scraper requires that data be taken at the same time and place, and that the units being compared be of approximately equal capacity.

Standard

Loading Ability Test Procedure—Scrapers

2006-02-05

HISTORICAL

J764_200602

This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)

Standard

LOADING ABILITY TEST PROCEDURE—SCRAPERS

1995-08-01

HISTORICAL

J764_199508

This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)

Standard

Loading Ability Test Procedure - Scrapers

2011-10-27

CURRENT

J764_201110

This SAE Information Report applies to all independent or combination construction and industrial machines that are designed to scraper-load and transport material. (See SAE J1116 and J1057a.)