Search Results

The cathode gas diffusion layer (GDL) is an important component of polymer electrolyte membrane (PEM) fuel cell. Its design parameters, including thickness, porosity and permeability, significantly affect the reactant transport and water management, thus impacting the fuel cell performance. This paper presents an optimization study of the GDL design parameters with the objective of maximizing the current density under a given voltage. A two-dimensional single-phase PEM fuel cell model is used. A multivariable optimization problem is formed to maximize the current density at the cathode under a given electrode voltage with respect to the GDL parameters. In order to reduce the computational effort and find the global optimum among the potential multiple optima, a global metamodel of the actual CFD-based fuel cell simulation, is adaptively generated using radial basis function approximations.

Understanding reliability is critical in design, maintenance and durability analysis of engineering systems. A reliability simulation methodology is presented in this paper for vehicle fleets using limited data. The method can be used to estimate the reliability of non-repairable as well as repairable systems. It can optimally allocate, based on a target system reliability, individual component reliabilities using a multi-objective optimization algorithm. The algorithm establishes a Pareto front that can be used for optimal tradeoff between reliability and the associated cost. The method uses Monte Carlo simulation to estimate the system failure rate and reliability as a function of time. The probability density functions (PDF) of the time between failures for all components of the system are estimated using either limited data or a user-supplied MTBF (mean time between failures) and its coefficient of variation.

Simulations of tire cornering properties with small-amplitude lateral inputs are carried out in non-steady state conditions. The simulation algorithm is derived and the discrete expressions are presented in detail. Based on the simulations, lateral force and aligning moment can be calculated numerically with time-varying yaw angle and lateral displacement as inputs in spatial domain. The flexibility of both tread and carcass along with tire width is taken into account effectively in the simulations, in which the flexibility of carcass includes translating, bending and twisting flexibility. The simulations in non-dimensional form are associated with four tire structure parameters only, which are non-dimensional parameters reflecting the characteristics of tire stiffness, tire width and contact length. Simulation results are validated by test data from step lateral inputs tests. Several typical simulation results are provided.

A reliability analysis method is presented for time-dependent systems under uncertainty. A level-crossing problem is considered where the system fails if its maximum response exceeds a specified threshold. The proposed method uses a double-loop optimization algorithm. The inner loop calculates the maximum response in time for a given set of random variables, and transforms a time-dependent problem into a time-independent one. A time integration method is used to calculate the response at discrete times. For each sample function of the response random process, the maximum response is found using a global-local search method consisting of a genetic algorithm (GA), and a gradient-based optimizer. This dynamic response usually exhibits multiple peaks and crosses the allowable response level to form a set of complex limit states, which lead to multiple most probable points (MPPs).

High-fidelity finite element (FE) tire-snow interaction models have the advantage of better understanding the physics of the tire-snow system. They can be used to develop semi-analytical models for vehicle design as well as to design and interpret field test results. For off-terrain conditions, there is a high level of uncertainties inherent in the system. The FE models are computationally intensive even when uncertainties of the system are not taken into account. On the other hand, field tests of tire-snow interaction are very costly. In this paper, dynamic metamodels are established to interpret interaction forces from FE simulation and to predict those forces by using part of the FE data as training data and part as validation data. Two metamodels are built based upon the Krieging principle: one has principal component analysis (PCA) taken into account and the other does not.

Navigation systems have been recently introduced into vehicles in China, one of the world's largest in-vehicle system markets in the next few years. However, existing Chinese navigation systems either simply translate the system language from other languages to Chinese or do not have intelligent functions which consider the characteristics of Chinese users, their language, or geographic features of mainland China. To solve this problem, this study first reviewed the characteristics of Chinese language (textual part) including its visual (words orientation: horizontal vs. vertical), words simplification, and auditory formats (e.g., dialects) which are different from western languages.

In this research, off-road vehicle simulation is performed with tire-soil interaction model. The predictive semi-analytical model, which is originally developed for tire-snow interaction model by Lee [4], is applied as a tire-soil interaction model and is implemented to MSC/ADAMS, commercial multi-body dynamic software. It is applied to simulate the handling maneuver of military vehicle HMMWV. Two cases are simulated with Michigan sandy loam soil property. Each case has two maneuvers, straight-line brake and step steer (J-turn). First, tire-soil interaction model and conventional on-road tire model are simulated on the flat road of the same frictional coefficient. The proposed tire-soil interaction model provided larger force under the same slip. Second, the same maneuvers are performed with real off-road frictional coefficient. The proposed tire-soil model can be validated and the behavior of the off-road vehicle can be identified through two simulation cases.

The STI (System Technology Inc.) tire model is one of the most important semi-empirical (steady-state) tire models currently applied in the vehicle dynamics simulation software package of the National Advanced Driving Simulator (NADS). The STI tire model is presented originally based on tire contact length directly and the contact length is required to provide. Based on the concepts of nominal slip in both longitudinal and lateral directions, the STI tire model is analyzed and rewritten. It shows that the STI tire model does not actually depend on the contact length. Meanwhile, the model parameters are partially assigned new physical definitions, for example, static/dynamic stiffness and shape factors. Some simplified expressions are given based on further assumption conditions. The simplified expressions are also obtained regarding longitudinal slip at arbitrary speeds (including low speed, zero speed and stand still), which is originally presented by Bernard.

As one of advanced driver assistance systems (ADAS), automatic parking system has great market prospect and application value. In this paper, based on an intelligent vehicle platform, an automatic parking system is designed by using multi-point preview theory. The vehicle kinematics model was established, based on Ackermann steering principle. By analyzing working conditions of parallel parking, complex constraint condition of parking trajectory is established and reference trajectory based on sine wave is proposed. In addition, combined with multi-point preview theory, the design of trajectory following controller for automatic parking is completed. The cost function is designed, which consider the trajectory following effect and the degree of easy handling. The optimization of trajectory following control is completed by using the cost function.

Snow-covered ground severely affects vehicle mobility in cold regions due to low friction coefficients and snow sinkage. Simulation and evaluation of vehicle mobility in cold regions require real-time friendly tire-snow interaction models that are applicable for quasi-real driving conditions. Recently, we have developed tire-snow dynamics models that are snow depth dependent, sinkage dependent and normal load dependent. The number of model parameters is reduced through theoretical analysis of normal indentation, contact pressure and shear stress within the tire-snow interface. In-plane and out-of-plan motion resistances and traction forces (gross traction and net traction) are analytically calculated for combined slip conditions.

There is a scarcity of comprehensive tire-snow interaction models for combined (longitudinal and lateral) slips. Current tire-snow interaction empirical and finite element models mostly focus on force-slip relationships in the longitudinal direction only, following the approach used for tire-soil interaction models. One of the major differences between tire-snow and tire-soil interactions is that the former is typically depth-dependent, especially for shallow snow. Our approach in the modeling of tire-snow interaction is to rely on the underlying physics of the phenomena, wherever we could, and use test data (or finite element simulation results in the absence of test data) to calibrate the required model parameters. We also make contact with on-road models and extend them for off-road applications.

The door closing effort is a quality issue concerning both automobile designers and customers. This paper describes an Excel based mathematical model for predicting the side door closing effort in terms of the required minimum energy or velocity, to close the door from a small open position when the check-link ceases to function. A simplified but comprehensive model is developed which includes the cabin pressure (air bind), seal compression, door weight, latch effort, and hinge friction effects. The flexibility of the door and car body is ignored. Because the model simplification introduces errors, we calibrate it using measured data. Calibration is also necessary because some input parameters are difficult to obtain directly. In this work, we provide the option to calibrate the hinge model, the latch model, the seal compression model, and the air bind model. The door weight effect is geometrically exact, and does not need calibration.