Search Results

Atmospheric Neutron Single Event Effects (SEE) are widely known to cause failures in all electronic hardware, and cause proportionately more failures in avionics equipment due to the use altitude. In digital systems it is easy to show how SEE can contribute several orders of magnitude more faults than random (hard) failures. Unfortunately, current avionics Safety assessment methods do not require consideration of faults from SEE. AVSI SEE Task Group (Aerospace Vehicle Systems Institute Committee #72, on Mitigating Radiation Effects in Avionics) is currently coordinating development of an atmospheric Neutron Single Event Effects (SEE) Analysis method. This analysis method is a work in progress, in close collaboration with SAE S-18 and WG-63 Committees (Airplane Safety Assessment Committee). The intent is to include this method as part of current revisions to ARP4761 (Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment).

The bleed air contamination monitor was developed at Honeywell to ensure that our products provide the highest quality bleed air to aircraft environmental control systems. The bleed air contamination monitor is currently for ground based applications only. It is being developed into an on board system for future applications. Current Aircraft Cabin Air Quality measurement techniques are very labor intensive and require days or even weeks of laboratory analysis to provide results. This is unacceptable from a manufacturing and service perspective. Development of a real time analyzer began in the early 1990s and has progressed to a point where a product is ready for introduction that not only provides real time information regarding engine air contamination, but is also easy for operators to use with a minimum amount of training.

NASA and the U.S. Army have designed, developed, and tested a Computer Aiding for Low-Altitude Helicopter Flight guidance system. This system provides guidance to the pilot for near-terrain covert helicopter operations. The guidance is presented to the pilot through symbology on a helmet mounted display. This system has demonstrated the feasibility of a pilot-centered concept of terrain flight guidance that preserves pilot flexibility and authority. The system was developed using extensive piloted simulation and then implemented in a UH-60 Blackhawk helicopter for flight development and evaluation. A close correlation between simulation and actual flight was found; however, in flight overall pilot workload increased and performance decreased. This paper presents a description of the basic system design, simulation, and flight evaluations.

The Technology Test Bed and Hydrogen Cold Flow facilities at NASA’s Marshall Space Flight Center (MSFC) in Huntsville, Alabama provide unique testing capabilities for the aerospace community. Located at the Advanced Engine Test Facility (AETF), these facilities are operated and maintained by MSFC Propulsion Laboratory personnel. They provide a systems and components level testing platform for validating new technology concepts and advanced systems design and for gaining a better understanding of test article internal environments. A discussion follows of the particular capabilities of each facility to provide a range of testing options for specific test articles.

Many changes have been approved for implementation into the International Space Station (ISS) design for Thermal Control (TC) since the System Design Review (SDR)conducted in March 1994. Some of the changes have resulted in changes in the basic content of the ISS TC Subsystem (TCS) while others have addressed more efficient ways of developing the system. The design changes were made to address several distinct facets of the program. Foremost was the intent to control costs of the ISS program. The intent to ensure that the ISS is not completely dependent on any one partner was a major reason for other changes. Refinement of the SDR design and identification and solution of problems with the SDR design resulted in other design changes. While the technology to be used for the ISS TC has remained the same during this period, significant changes have been made to the way the ISS thermal control technology is implemented.

Aviation Data Integration System (ADIS) project explores methods and techniques for integrating heterogeneous aviation data to support aviation problem-solving activity. Aviation problem-solving activities include: engineering troubleshooting, incident and accident investigation, routine flight operations monitoring, flight plan deviation monitoring, safety assessment, maintenance procedure debugging, and training assessment. To provide optimal quality of service, ADIS utilizes distributed intelligent agents including data collection agents, coordinator agents and mediator agents. This paper describes the proposed agent-based architecture of the Aviation Data Integration System (ADIS).

NASA's plans to implement the Vision for Space Exploration include extensive human-robot cooperation across an enterprise spanning multiple missions, systems, and decades. To make this practical, strong enterprise-level interface standards (data, power, communication, interaction, autonomy, and physical) will be required early in the systems and technology development cycle. Such standards should affect both the engineer and operator roles that humans adopt in their interactions with robots. For the engineer role, standards will result in reduced development lead-times, lower cost, and greater efficiency in deploying such systems. For the operator role, standards will result in common autonomy and interaction modes that reduce operator training, minimize workload, and apply to many different robotic platforms. Reduced quantities of spare hardware could also be a benefit of standardization.

Under a NASA-sponsored technology development project, a multi-disciplinary team consisting of industry, academia, and government organizations lead by Hamilton Sundstrand is developing an amine-based humidity and CO2 removal process and prototype equipment for Vision for Space Exploration (VSE) applications. Originally this project sought to research enhanced amine formulations and incorporate a trace contaminant control capability into the sorbent. In October 2005, NASA re-directed the project team to accelerate the delivery of hardware by approximately one year and emphasize deployment on board the Crew Exploration Vehicle (CEV) as the near-term developmental goal. Preliminary performance requirements were defined based on nominal and off-nominal conditions and the design effort was initiated using the baseline amine sorbent, SA9T.

The inability of available situation displays to provide a decelerating instrument approach capability to a hover led to a flight research program in which control-command information was displayed for three degrees of freedom. The test aircraft (NASA's CH-46C in-flight simulator) was stabilized with high-gain attitude command system. Using this system, the pilot was able to decelerate the aircraft to a hover while simultaneously following a 6 deg glidepath. Although these tests demonstrate the potential of this concept, a number of factors, including adequate integration of command and situation information, were identified as affecting pilot acceptance of the system.