Search Results

In Aeronautic industry, when we launch a new industrialization for an aircraft sub assembly we always have the same questions in mind for drilling operations, especially when focusing on lean manufacturing. How can we avoid dismantling and deburring parts after drilling operation? Can a drilling centre perform all the tasks needed to deliver a hole ready to install final fastener? How can we decrease down-time of the drilling centre? Can a drilling centre be integrated in a pulse assembly line? How can we improve environmental efficiency of a drilling centre? It is based on these main drivers that AIRBUS has developed, with SPIE and SOS, a new generation of drilling centre dedicated for hard materials such as titanium, and high thicknesses. The first application was for the assembly of the primary structure of A350 engine pylons. The main solution that was implemented meeting several objectives was the development of orbital drilling technology in hard metal stacks.

Laser Based Powder Bed Fusion, a specific application of additive manufacturing, has shown promise to replace traditionally fabricated components, including castings and wrought products (and multiple-piece assemblies thereof). In this process, powder is applied, layer by layer, to a build plate, and each layer is fused by a laser to the layers below. Depending on the component, it appears that only 3-5% of the powder charged into the powder bed fusion machine is fused. Honeywell’s initial part qualification efforts have prohibited the reuse of powder. Any unfused powder that exits the dispenser (i.e., surrounds the build or is captured in the overflow) is considered used. In order for the process to be broadly applicable in an economical manner, a methodology should be developed to render the balance of the powder (up to 97% of the initial charge weight) as re-usable.

The paper presents an innovative approach for the functional specification of complex and highly integrated aircraft control systems, such as the Environmental Control System (ECS), by applying model based specification methods. Complexity and effectiveness of modern ECS have significantly increased during the last few years along with development of new technologies and innovations in control engineering as well as digital data distribution and processing. Efficient management of cabin air flows on the one hand makes the ECS more energy-saving and on the other hand more complex with regard to its functionality and interaction with other interfaced aircraft systems. Numerous data interfaces to other systems and a high degree of automation are typical for a modern ECS. The aircraft manufacturer specifies the entire ECS functions and its interactions within the aircraft.

The work describes a concept application that aids a safety engineer to create a layup of equipment models by using an image scan of a schematic and a library of predefined standard component and their symbols. The approach uses image recognition techniques to identify the symbols within the scanned image of the schematic from a given library of symbols. Two recognition approaches are studied, one uses General Hough Transform; the other is based on pixel-level feature computation combining both structure and statistical features. The application allows the user to accept or edit the results of the recognition step and allows the user to define new components during the layup step. The tool then generates an output file that is compatible with a formal safety modeling tool. The identified symbols are associated to behavioral nodes from a model based safety tool.

The work describes a concept application to aid a safety engineer to perform an audit of a production aircraft against safety driven installation requirements. The capability is achieved using the following steps: A) Image capture of a product and measurement of distances between datum points within the product with/without references to a planar surface B) A digital reconstruction of the fabricated product by using multiple captured images to reposition parts according to the actual model. C) The projection onto the 3D digital reconstruction of the safety related installation constraints, respecting the original intent of the constraints that are defined in the digital mock-up.

Currently the wing box rib assembly process requires the manual location and temporary fixing of components within product specific jig or fixtures for drilling. After drilling and reaming, parts are separated, cleaned, deburred prior to adding sealant, reclaiming and final bolting, but this may significantly increase cost, manufacturing lead-time, reduces flexibility and cannot usually be economically modified for use on other aircraft types. Due to potential increase in demand for the next generation single isle aircraft, existing tooling solutions have to be improved and new technologies have to be developed. This paper describes the development and testing of flexible tooling to provide clamping and support for drilling wing box ribs to mating rib posts within a restricted environment. Results are presented along with a discussion of the problems that may be encountered during clamping trials.

The Environmental Control System is a relevant element of any conventional or More Electric Aircraft (MEA). It is either the key consumer of pneumatic power or draws a substantial load from the electric power system. The objective of this paper is to present a tool for the design of Environmental Control Systems and to apply it to an unconventional system. The approach is based on a recently proposed methodology, which is improved with respect to flexibility and ease-of-use. Furthermore, modeling and simulation of vapor compression cycles is discussed, which are candidate technological solutions for More Electric Aircraft concepts. A steady-state moving boundary method is presented to model heat exchangers for such applications. Finally, the resulting design environment is applied to optimization of an unconventional ECS architecture and exemplary results are presented.

This paper discusses the design of a model-based fault detection scheme for robust and early detection of runaways in aircraft control surfaces servo-loop. The proposed scheme can be embedded within the structure of in-service monitoring systems as a part of the Flight Control Computer (FCC) software. The final goal is to contribute to improve the performance detection of unanticipated runaway faulty profiles having very different dynamic behaviors, while retaining a perfect robustness. The paper discusses also the tradeoffs between adequacy of the technique and its implementation level, industrial validation process with Engineering support tools, as well as the tuning aspects. The proposed methodology is based on a combined data-driven and system-based approach using a dedicated Kalman filtering. The technique provides an effective method ensuring robustness and good performance (well-defined real-time characteristics and well-defined error rates).

Industrial requirements imply optimizing the development cycle, reducing manufacturing costs and reaching marketable product maturity as fast as possible. The design stage often involves multiple sites and various partners. In this context, the use of computer simulation becomes absolutely necessary to meet industrial needs. Nevertheless, this activity can be effective only if it is integrated correctly in the industrial organization. In the aeronautical and space systems industry, mechanical specifications often require the use of composites reinforced by continuous carbon fibers. The goal of this article is to describe how, on a time frame of nearly twenty years, a series of scientific and technical tasks were carried out in partnership in order to develop, validate and implement Resin Transfer Molding (RTM) flow simulation and cure analysis for high performance composites. The research stage started at the university in 1991.

The paper describes the methodology of contact problem solving that is used in specialized software code aimed at simulation of aircraft assembly process. For considered class of problems it is possible to radically reduce the number of unknowns without loss of accuracy. The results of validation of developed code against physical experiments and commercial FEM codes are also given.

This paper presents a novel scheme for the start-up of prime movers in starter/generator systems, such as main engine and auxiliary power units (APUs) in aerospace applications. The paper discusses this novel technique in detail for providing single-phase excitation techniques to a start exciter in a starter/generator system to increase the torque per ampere and lower the excitation voltage requirement. Simulation results are provided comparing this novel scheme with a traditional method.

This paper studies the technical characteristics of a start system for aircraft engines. By using the latest improvements in power electronics and digital controls this system eliminates the conventional Air Turbine Starter (ATS) or DC starter by driving the generator installed on the engine as a motor to achieve the start. The presented start system enables a completely new architecture in today's modern and efficient aircraft using the More Electric Architecture (MEA), since bleed air is not required to start the main engines. The MEA increases the overall efficiency of the aircraft by electrically driving the Environmental Control System (ECS) and other major systems such as anti-ice, landing gear, hydraulics etc. This start system eliminates the ATS and its equipment (bleed valve, clutch) for the larger engines or the DC Starter, while providing a start where the engine is accelerated up to 80% idle speed vs. 50-60% provided by the previous Starter.

This paper focuses on advances in active power converter topologies for power quality solutions for More Electric Aircraft (MEA). Advancements in power electronics encompass many technologies including power semiconductors, microprocessors or digital signal processors (DSPs), and component packaging. Hence, active power electronic solutions are becoming more attractive from the perspective of weight, volume, performance and cost. A particular contribution that leads to these advancements is the feasibility of implementing the robust control topologies using faster processors. In this paper various active topologies are reviewed, but a particular emphasis is given to a novel control topology for an active filtering technique where an overall reduction of current harmonics of an aircraft power distribution system can be achieved at the system level rather than at the Line Replaceable Unit (LRU) level.

Airbus is a leading aircraft manufacturer with the position as technology driver and a distinct customer orientation, broad commercial know-how and high production efficiencies. It is constantly working on further and new development of its products from ecological and economical points of view. Fuel Cell Systems (FCS) on board of an aircraft provide a good opportunity to address both aspects. Based on existing and upcoming research results it is necessary to find trend-setting measures for the industrial implementation and application of this technology. Past and current research efforts have shown good prospects for the industrial implementation and application of the fuel cell technology. Being an efficient source of primarily electric power the fuel cell would be most beneficial when used in conjunction with electrical systems.

In this paper a method of predicting the power dissipation in a hybrid Silicon Carbide IGBT power module using primarily the information available from the datasheet is shown. Mathematical modeling of the switching device is accomplished using MathCAD for the purpose of power dissipation calculation. The power dissipated is calculated on a pulse-by-pulse basis to allow for any arbitrary waveform to be studied. The mathematical model is validated by way of comparing the results with the power dissipation results calculated by manufacturer's proprietary software.

This paper reviews the characteristics of a power line network as data communication medium and studies the challenges encountered when communicating over power wiring. This technology review has been done as part of feasibility study for using aircraft power-lines for data communication. Power-Line Communication is a term which describes the use of existing electrical lines to provide the medium for a high speed communications network. Power Line Communications is achieved by superimposing the voice or data signals onto the line carrier signal using an appropriate communication technology. Power Line Communications represent a potential simplicity for communications among different devices, because it does not need additional wires for connecting devices network together. Power line cables have been used as a communication medium for many years. However, because power line cables are not designed for communication, they pose major challenges for a modem designer.

A passive gas removal device, i.e. gas trap is used in the Internal Thermal Control System (ITCS) of the International Space Station (ISS) to remove non-condensable gases to prevent the cavitation or air locking of the pump and malfunction of the pressure and flow sensors. Since the non-condensable gases are always ingested into the ITCS during the routine maintenance and/or replacement of components in the ITCS, it is necessary to have an efficient and reliable gas trap in the liquid coolant loop of the ITCS. To increase tolerance to particulate and microbial growth fouling, extend the operational life, reduce the cost and on-orbit maintenance, and decrease crew workload, an alternative gas trap composed of only one type of membrane is developed. This paper describes the efforts involved in this development, which include the design concept of the alternative gas trap, performance modeling, and the preliminary performance test of the alternative gas trap in the relevant environment.

This paper describes the Airbus plans to use ADS-B in the future concept of operations in both the European SESAR and the US NEXTGEN concepts of operations. It details the different steps that are currently considered by Airbus roadmap to deploy ADS-B services and functions. In particular, the following points are described: Use of ADS-B OUT in Non Radar Airspace Use of ADS-B IN and the associated Airbus functions to offer a better Air Traffic Situation Awareness (ATSAW) package: the various applications for airborne, in trail climb/descent procedures or enhanced visual acquisition are particularly detailed. Use of ADS-B for the future Spacing function as currently considered in the initial ASAS implementation for SESAR: the three “Remain Behind”, “Merge at Waypoint then Remain behind” and the “Heading then merge behind” applications are explained.

This paper examines why large aircraft engines are started the way they are today, and why that may all change in the not too distant future. Electric starting of aircraft engines and Auxiliary Power Units (APU) has been limited to 28 VDC battery systems, with starting power typically under 10 kW. Above this power level the very high battery currents, and resulting voltage drops, make the approach less and less practical. Large engines for commercial transports may require more than 100 kW to start so low voltage battery starting will not be an option.

The paper is devoted to the simulation of A320 wing assembly on the base of numerical experiments carried out with the help of ASRP software. The main goal is to find fasteners’ configuration with minimal number of fastening elements that provides closing of admissible initial gaps. However, for considered junction type initial gap field is not known a priori though it should be provided as input data for computations. In order to resolve this problem the methodology of random initial gap generation based on available results of gap measurements is developed along with algorithms for optimization of fasteners' configuration on generated initial gaps. Presented paper illustrates how this methodology allows optimizing assembly process for A320 wing.