Search Results

A biaxial test procedure is used to assess the constitutive properties of polymers in tension. The constitutive constants are derived for high strain rate applications such as those associated with crashworthiness studies. The test procedure is used in conjunction with a time- and strain-dependent quasi-linear viscoelastic constitutive law consisting of a Mooney-Rivlin formulation combined with Maxwell elements. The procedure is demonstrated by describing the stress vs. strain relationship of a rubber specimen subjected to a step-relaxation input. The constitutive equation is transformed from a nonlinear convolution integral to a set of first order differential equations. These equations, with the appropriate boundary conditions, are solved numerically to obtain transient stresses in two principal directions. Material constants for use in the explicit LS-Dyna non-linear finite element code are provided.

One element of primary interest in the analysis and reconstruction of vehicle collisions is an evaluation of impact severity. The severity of an impact is commonly quantified using vehicle closing speeds and/or velocity change (delta-V). One fundamental methodology available to determine the closing speed and corresponding velocity change is an analysis of the collision based on a combination of the principles of Conservation of Momentum and Conservation of Energy. A critical element of this method is an assessment of the amount of kinetic energy that is dissipated during plastic structural deformation (crush) of the involved vehicles. This crush energy assessment is typically based on an interpolation or an extrapolation of data collected during National Highway Traffic Safety Administration (NHTSA) sponsored crash testing at nominal speeds of 30 or 35 mph.

Steering control devices are used by people who have difficulty gripping the steering wheel. These devices have projections that may extend up to 14 cm toward the occupant. Testing indicated that contact with certain larger steering control devices with tall rigid projections could severely injure a driver in a frontal collision. In order to reduce this injury risk, an alternative, less injurious design was developed and tested. This design, which included replacing unyielding aluminum projections with compliant plastic ones, produced significantly lower peak contact pressure and less damage to the chest of a cadaver test subject, while maintaining the strength necessary to be useful.