Search Results

In the modern automobile scenario in developing countries, customers are getting more meticulous and market more competitive. Now even the budget vehicle customer expects desirable vehicle performance in specific use cases of the vehicle that were previously not focused by designers. Hence, the focus on perceived quality challenges automobile engineers to go the extra mile when it comes to the cost-effective design of parts that are tangible to the customer. A vehicle's cowl cover is one such exterior component. The primary functions of this part are to provide air intake opening for the HVAC system and cover the components like wiper motor. The aesthetic function is to cover the gaps between windshield, hood, and fender as seamlessly as possible. A specific role of cowl cover, which calls for a designer's attention, is its load-bearing capability.

Continuously rising fuel prices and global concern on climate change have resulted in a need to deliver vehicles with increased fuel economy. This has to be achieved without compromising on performance, durability and cost. Passenger car manufacturers are looking at various ways to maximize fuel economy. Major part of fuel saving can be tapped from engine itself. This can be done by activities on engine as below: Improving overall combustion efficiency and hence BSFC Efficient thermal management. Weight reduction of engine parts or complete downsizing Hybridization. Reducing engine losses i.e. parasitic losses from auxiliaries and frictional losses. This paper is focused on the reduction of engine frictional losses (FMEP) through the use of low viscosity lubrication oils. Various factors in lubrication oil contribute to friction. Experimental approach to quantifying the effect of different parameters of lubrication oil on total engine friction is presented.

Seats, seat belts, seat belt anchorages, etc., are safety critical items for the passenger in case of sudden acceleration/deceleration and accidents. Seat belts have become mandatory fitments on front seats of M and N categories of vehicles from April 1994 in India[1]. Seat belt without a proper anchorage does not serve any purpose. Hence, seat belt anchorage testing became mandatory in India in year 2002. In real accident situation seat belts come in to action within few ms and complete phenomenon is finished in 150 ms. However the regulatory requirements prescribed in AIS: 015, ECE R14 and 76/115/EEC specify the application of loading to be achieved as rapidly [2].A number of seat belt anchorage tests were conducted on BIW and laboratory model setups. This paper highlights the effect of loading rate, and loading method on the load bearing capacity of the seat belt anchorages, floor area and seat structures.

The seating system is an inseparable part of any automobile. Its main function is not only to provide a space to the user for driving but also to provide support, comfort and help to ergonomically access the various features and necessary operations of the vehicle. For comfort and accessibility, seats are provided with various mechanisms for adjustments in different directions. Typical mechanisms used for seating adjustment include seatback recliners, lifters (height adjusters), longitudinal adjusters, lumber support, rear seat folding mechanism etc. These mechanisms can be power operated or manual based on vehicle/market requirements. For manual mechanisms, the occupant adjusts the position of seat by operating the mechanism with his/her hand. Often comfort to the occupant during operation is limited to the operating effort of the mechanism. However, as will be shown through this study, operating effort is only one of the parameters which provide overall comfort feeling.

Increasing customer expectations of comfort and convenience inside the vehicle has resulted in OEMs working on various solutions to improve interior ergonomics and overall layout. One of the key areas of focus has been the ease of ingress into and egress from the vehicle. But with increased sharing of platforms in OEM Model Lineup, due to obvious benefits like cost and common tooling/parts, it is very difficult to achieve improved results in different vehicles (like Hatchback, Notchback, SUV etc.) but with same underpinnings. One of the commonly used approaches is provision of false flooring via floor pads for front / Rear Passengers for easy Egress-Ingress. Floor Pads are used to maintain similar comfort levels across different vehicles sharing common platform and to maintain similar relationship between Foot resting positions and Side Sill.

Single body architecture designed for various global markets and subjected to varied load cases is a challenge for Body in White (BIW) engineers. Optimization of structural design to meet regulatory, insurance and assessment requirements is an iterative and time consuming task. With focus on reduction of vehicle's damageability and ease of repairability Original Equipment Manufactures (OEM), insurance companies and Research Council for Automobile Repairs (RCAR) [1] are striving for better designs. A space constraint crash box structure installed behind the bumper plays a significant role in absorption of energy, before transmitting to longitudinal rails. In this study, crashworthiness of a multipurpose crash box for a hatch segment vehicle is presented with the various design of experiments conducted with a focus on light weighting, cost and ease of manufacturing.

This article brings a practical analysis for determination of gravity center in unsymmetrical three dimensional bodies practically and graphically. The gravitational center of an object is the point from which if suspended, the object remains stable at all times, this is also called as center of mass of the object, or the theoretical point at which the entire weight of the object is assumed to be concentrated. In certain tests, the Center of Gravity (CG) of the Seat is required to be known, for load application. The CG is the point at which a SEAT would balance if it were possible to suspend it at that point. This paper deals with use of applied engineering and theoretical calculations to ascertain the CG of First and Second Row seats (individual and bench type). In this case the center of gravity location is expressed in units of length along each of three axes (X, Y and Z). Load balance equation is used to calculate the CG of the seat.

Offset crash compliance of a compact car is severe due to the compact layout and stringent fuel economy, weight and cost targets. Scope of the current work is to improve the structural crash performance of a compact car through CAE, in order to meet the offset frontal crash requirements as per ECE R94 Regulation. The project has been classified in three main phases. First phase includes the evaluation of baseline vehicle in CAE. In order to ensure the accuracy of CAE prediction, a methodology for predicting Spotweld rupture was implemented. Using this methodology, it is possible to find out the location and time of spotweld rupture as well as propagation of spotweld rupture in CAE. CAE results of spotweld rupture prediction showed good agreement with the physical test. In second phase, design iterations were carried out in order to meet the performance targets of structural deformation.

In manual transmission vehicles, Clutch has direct interaction with the driver and plays a significant role in defining the drivability and NVH of a vehicle. These key performance factors depend on the interaction of diaphragm and cushion springs of a clutch. For an automobile manufacturer, it’s essential to optimize the characteristics of these springs based vehicle performance requirements. A state of the art analytical model has been developed by modeling the diaphragm and cushion spring with exponential equations. Based on these models, response functions for release load, torque build-up, and pressure plate lift have been derived. Results achieved from these response functions are correlated with test data. Key contributing factors for peak clutch pedal load, vehicle launch acceleration, and disengagement point have been identified by sensitivity analysis. Multi-objective optimization is performed to select optimized parameters for vehicle performance improvement

The aim of the research was to explore and establish aspects that affect ageing of non-woven fabrics used in automobiles. One of the most vulnerable parts in a vehicle, at the behest of the customer, is the Floor Carpet. Original Equipment manufacturers are continually binging at doable options for providing low cost carpets that are functionally and aesthetically durable throughout the vehicle life. [1] Car interiors, especially carpet, must remain in impeccable condition to uphold a good resale value. Targeting the analysis of causes that affect ageing of non-woven fabric material will form the core study of the literature to follow. The establishment of which shall ascertain some viable solutions to augment quality of the contemporary non-woven automotive carpet.

In laboratory car crash tests, Anthropomorphic Test Devices (ATD) are equipped with piezoresistive and resistive sensors for occupant injury assessment. Accelerometers are inertial transducers that convert acceleration into electrical output which can be easily recorded by a Data Acquisition System (DAS). For an accelerometer, this electrical output mainly depends upon subjected acceleration, sensitivity of the accelerometer, excitation voltage and gain provided. Before use in testing, accelerometers are calibrated at a standard excitation (manufacturer decided) voltage to determine characteristics like Sensitivity, Sensitivity per unit excitation voltage, Zero Measurand Output (ZMO), Transverse Sensitivity etc. It is observed that these characteristics are highly dependent on the excitation voltage. In testing, due to limitations of DAS and/or other unwanted noise in the excitation voltage, these accelerometers are sometimes used at a different excitation voltage.

The side impact accident is one of the very severe crash modes for the struck side occupants. According to NHTSA fatality reports, side impact accounts for over 25% of the fatalities in the US. Similar fatality estimates have been reported in the EU region. Side crash compliance of a compact car is more severe because of the less space available between the occupant and the vehicle structure, stringent fuel economy, weight and cost targets. The current work focuses on the development of Side body structure of a compact car through Computer Aided Tools (CAE), for meeting the Side crash requirements as per ECE R95 Regulation. A modified design philosophy has been adopted for controlling the intrusion of upper and lower portion of B-pillar in order to mitigate the injury to Euro SIDII dummy. At first, initial CAE evaluation of baseline vehicle was conducted.

Recent advancement in numerical solutions and advanced computational power has given a new dimension to the design and development of new products. The current paper focuses on the details of work done in order to improve the vehicle performance in Offset deformable Barrier (ODB) crash as per ECER-94. A Hybrid approach involving the Structural Crash CAE as well as Multi-body Simulation in MADYMO has been adopted. In first phase of the development, CAE results of Structural deformation as well as Occupant injury of the baseline model were correlated with physical test data. The second phase includes the improvement in intrusion and crash energy absorption by structural countermeasures in the vehicle body. In third phase parametric study has been carried out via Madymo simulation in order to decide on the factors which can be controlled in order to mitigate the Occupant injury. Recommendations of Madymo simulation have been confirmed by conducting Physical sled tests.

Use of safety belts inside a vehicle is necessary to ensure the safety of passengers as well as drivers. To promote the use of seat belts, a seatbelt reminder system is utilized. This system incorporates a sensor for checking seat occupancy for the passenger seat. Activation of these sensors depends on various parameters like seat pad shape, seat upholstery, vehicle H-point, a load on the seat, etc. In this study, the load factor on the seat is studied. The load on the seat may come from occupants or due to the objects placed on the seat. The detection of objects as an occupant may result in false seat belt reminder alarm and cause inconvenience to the customers. Subjective analysis and surveys, covering a broad range of market population, were done to identify such objects. Consequently, performance requirements were determined to facilitate sensor optimization and selection.

To promote real time monitoring, IUPRm checks has been enforced in India from Apr’23 as a part of BS6-2 regulation. Since IUPRm monitoring is representative of diagnostic frequency in real driving conditions and usage pattern. Therefore, a clear understanding of real-world driving is required to define IUPRm targets. This paper shares methodology and Validation steps for defining IUPR routes for Indian market. Methodology objective is to standardize the market operating conditions over a particular region. Selected Methodology consist of three steps: For defining IUPR route framework, first step is to have a pre-market survey to know current IUPR status and improvement areas in existing market vehicles. Second step is to define market representative localized on road routes based on the finding of Pre-market survey. Third step is to validate defined IUPR routes and correlate the output in reference to coverage of market operating conditions.

With ever increasing demand for vehicle safety and fuel efficiency, Body in White (BIW) designers are striving for vehicle's body mass optimization leading to the development of lean designs. Nevertheless, considerations like ergonomics also play a significant role while deciding the vehicle structure. As an example, A-pillar (front pillar) plays a major role in vehicle's passive safety. Increase in its cross section size, beyond a particular grade and gauge optimization is eminent to meet target requirements of rigidity and crash. However, the increased obstruction because of the wider section would not only lead to poor visibility and a claustrophobic feeling to the driver but also lead to a lesser response time for him or her to prevent a collision. Obstruction from A-pillar can be a subjective feeling of driver but it should also be quantified and measured to optimize the A-pillar structure. Numerous methodologies are being adopted globally to measure the A-pillar obstruction.

Road accidents are a major concern worldwide and vulnerable road users make up more than half of the victims of road accident deaths. In order to combat this issue, several countries worldwide have mandated pedestrian safety test regulations viz., AIS100 & UN-R127. One of the requirements of the regulations is when Flexible Pedestrian Legform Impactor (Flex-PLI) is impacted onto the frontal structure of the vehicle at a speed of 40kmph, the Bending moment (BM) of tibia bone of Flex-PLI shall not exceed the regulatory limit of 340Nm. In this paper, we have built a statistical model for predicting the BM of tibia in Flex-PLI using regression analysis. 13 vehicles have been selected from all applicable vehicle categories viz., Sedan, hatchback, Coupe & SUV/MUV for this undertaking. An exhaustive analysis of the vehicle frontal structures and Flex-PLI test videos have been done to identify & measure the design parameters to be used as predictor variables.