Search Results

In a Spark-Ignited engine, there will come a point, as load is increased, where the unburned air-fuel mixture undergoes auto-ignition (knock). The onset of knock represents the upper limit of engine output, and limits the extent of engine downsizing / boosting that can be implemented for a given application. Although effective at mitigating knock, requiring high octane fuel is not an option for most markets. Retarding spark timing can extend the high load limit incrementally, but is still bounded by limits for exhaust gas temperature, and spark retard results in a notable loss of efficiency. Likewise, enriching the air-fuel mixture also decreases efficiency, and has profound negative impacts on engine out emissions. In this current work, a Direct-Injected, Boosted, Spark-Ignited engine with Variable Valve Timing was tested under steady state high load operation. Comparisons were made among three fuels; an 87 AKI, a 91 AKI, and a 110 AKI off-road only race fuel.

Demand for predictive powertrain control is rapidly increasing with the recent advancement of Advanced Driving Assistance Systems (ADAS) and Autonomous Driving (AD). The full or semi-autonomous functions could be leveraged to realize better user acceptance as well as powertrain efficiency of the connected vehicle utilizing the proposed Drive Horizon. The sensors of automated driving provide perception of surrounding driving environment which is required to safely navigate the vehicle in real-world driving scenarios. The proposed Drive Horizon provides real-time forecast of driving environment that a vehicle will encounter during its entire travel. This paper summarizes the vehicle’s future speed prediction technique which is an integral part of Drive Horizon for optimized energy control of the vehicle. The prediction model has been developed that integrates information from multiple sources including vehicle GPS, traffic information and map data.

Impingement of jet-to-jet has been found to give improved spray penetration characteristics and higher vaporization rates when compared to multi-hole outwardly injecting fuel injectors which are commonly used in the gasoline engine. The current work studies a non-reacting spray by using a 5-hole impinging-jet style direct-injection injector. The jet-to-jet collision induced by the inwardly opening nozzles of the multi-hole injector produces rapid and short jet breakup which is fundamentally different from how conventional fuel injectors operate. A non-reacting spray study is performed using a 5-hole impinging jet injector and a traditional 6-hole Bosch Hochdruck-Einspritzventil (HDEV)-5 gasoline direct-injection (GDI) injector with gasoline as a fuel injected at 172 bar pressure with ambient temperature of 653 K and 490 K and ambient pressure of 37.4 bar and 12.4 bar.

Spray structure has a significant effect on emissions and performance of an internal combustion engine. The main objective of this study is to investigate spray structures based on four different multiple jet impingement injectors. These four different multiple jet-to-jet impingement injectors include 1). 4-hole injector (Case 1), which has symmetric inwardly opening nozzles; 2). 5-1-hole (Case 2); 3). 6-2-hole (Case 3); and 4). 7-3-hole (Case 4) which corresponding to 1, 2, 3 numbers of adjacent holes blocked in a 5-hole, 6-hole, and 7-hole symmetrical drill pattern, respectively. All these configurations are basically 4-holes but with different post collision spray structure. Computational Fluid Dynamics (CFD) work of these sprays has been performed using an Eulerian-Lagrangian modelling approach.

The required Fuel Economy improvement to meet increasing CAFE standards and the global trend to reduce CO2 emissions has prompted automakers to look at new technologies and optimize current technologies. One area of focus is the reduction of mechanical energy losses in driveline systems, which translate to less fuel consumption. Even though the driveline and chassis components account for only 2% (approximately) of the total mechanical losses in passenger vehicles, automakers have shown interest in maximizing the mechanical efficiency of driveline systems. A key component of any driveline system is the Halfshaft (HS), consisting of two Constant Velocity Joints (CVJ’s). The efficiency of CVJ’s is dependent on the joint architecture, angle of operation, transmitted torque, rotational speed and the grease selected for lubrication. Premium Tripots have the highest mechanical efficiency among CVJ’s. Ball-type joints tend to have lower efficiency.

The characteristics of combustion knock metrics over a number of engine cycles can be an essential reference for knock detection and control in internal combustion engines. In a Spark-Ignition (SI) engine, the stochastic nature of combustion knock has been shown to follow a log-normal distribution. However, this has been derived from experiments done with gasoline only and applicability of log-normal distribution to dual-fuel combustion knock has not been explored. To evaluate the effectiveness and accuracy of log-normal distributed knock model for methane-gasoline blended fuel, a sweep of methane-gasoline blend ratio was conducted at two different engine speeds. Experimental investigation was conducted on a single cylinder prototype SI engine equipped with two fuel systems: a direct injection (DI) system for gasoline and a port fuel injection (PFI) system for methane.

In this paper, two correlations, Windowed Selected Moving Autocorrelation (WSMA) and Tri-Correlation (TriC), are introduced and discussed. The WSMA is simpler than the conventional autocorrelation. WSMA uses less data points to obtain useful signal content at desired frequencies. The computational requirement is therefore reduced compared to the conventional autocorrelation. The simplified TriC provides improved signal to noise separation capability than WSMA does while still requiring reduced computational effort compared to the standard autocorrelation. Very often, computation resource limitation exists for real-time applications. Therefore, the WSMA and TriC offer more opportunities for real-time monitor and feedback control applications in the frequency domain due to their high efficiencies. As an example, applications in internal combustion (IC) engine misfire detection are presented. Simulation and vehicle test results are also presented in this paper.

Copper die-casting is still a relatively new casting process and the numerical formulation of this process is still in its developmental stages. A casting simulation software - ADSTEFAN was used to numerically determine the porosity in edge-gated copper rotor die-casting. The results obtained from simulation were then compared to the real die-cast copper rotors that were produced. Shot profiles are shown to be very instrumental in controlling porosity. Profiles designed to pre-fill a portion of the gate end ring at the slow shot speed prior to accelerating to the fast velocity to fill the conductor bars and ejector end ring are shown to be very effective in minimizing and controlling porosity. Since the electrical conductivity of copper is nearly 60% higher than that of aluminum, substituting copper for aluminum in the rotor would markedly increase the electrical efficiency of the motor.

As more consumers and operators adopt electric vehicles (EVs) as personal and fleet vehicles, questions regarding recharge time, reliability, and interoperability of EV supply equipment and charging systems currently in use across North America and Europe remain. The current lack of understanding has led to consumer anxiety and, in some cases, inadvertent abuse and mishandling of electric supply equipment. Electric Vehicle Recharge Time, Reliability, and Interoperability navigates issues such as charging equipment reliability; the complexity Interoperability concerning charging networks, EVs, and payment systems; various public and private charging network issues; and lagging regulations and standards. While many challenges need to be addressed, this report also identifies the improvements made since early adoption of EV charging technology as well as ongoing efforts to improve it further. Click here to access the full SAE EDGETM Research Report portfolio.

This is the second part of a study on using port water injection to quantifiably enhance the knock performance of fuels. In the United States, the metric used to quantify the anti-knock performance of fuels is Anti Knock Index (AKI), which is the average of Research Octane Number (RON) and Motor Octane Number (MON). Fuels with higher AKI are expected to have better knock mitigating properties, enabling the engine to run closer to Maximum Brake Torque (MBT) spark timing in the knock limited region. The work done in part I of the study related increased knock tolerance due to water injection to increased fuel AKI, thus establishing an ‘effective AKI’ due to water injection. This paper builds upon the work done in part I of the study by repeating a part of the test matrix with Primary Reference Fuels (PRFs), with iso-octane (PRF100) as the reference fuel and lower PRFs used to match its performance with the help of port water injection.

The global trend to reduce CO2 emissions, combined with the popularity of Sport Utility Vehicles (SUV’s), has prompted automakers to design and manufacture lighter vehicles with suspension architectures that may require halfshafts (HS’s) to operate at higher continuous angles than in the past. Noise, Vibration and Harshness (NVH) characteristics of a halfshaft, as well as its durability, are functions of the operating angle and the lubricating grease in the joints. Newer vehicles require driveline solutions that can provide consistent dynamic performance over a wide range of operating angles. Tripot-type Constant Velocity Joints (CVJ’s) are commonly used as inboard joints in a halfshaft. Through proper grease selection, premium tripots may be lubricated with greases containing solid additives, which provide consistent dynamic performance and durability.

The Electronic Control Unit (ECU) of an Electric Power Steering (EPS) system is a core device to decide how much assistance an electric motor applies on a steering wheel. The EPS ECU plays an important role in EPS systems. The effectiveness of an ECU needs to be thoroughly tested before mass production. Hardware-in-the-loop simulation provides an efficient way for the development and testing of embedded controllers. This paper focuses on the development of a HiL system for testing EPS controllers. The hardware of the HiL system employs a dSPACE HiL simulator. The EPS plant model is an integrated model consisting of a Vehicle Dynamics model of the dSPACE Automotive Simulation Model (ASM) and the Nexteer Steering model. The paper presents the design of an EPS HiL system, the simulation of sensors and actuators, the functions of the ASM Vehicle Dynamics model, and the integration method of the ASM Vehicle Dynamics model with a Steering model.

High-speed spray-to-spray liquid impingement could be an effective phenomenon for the spray propagation and droplet vaporization. To achieve higher vaporization efficiency, impingement from two-hole nozzles is analyzed in this paper. This paper focuses on investigating vaporization mechanism as a function of the impingement location and the collision breakup process provided by two-hole impinging jet nozzles. CFD (Computational Fluid Dynamics) is adopted to do simulation. Lagrangian model is used to predict jet-to-jet impingement and droplet breakup conditions while KH-RT breakup and O'Rourke collision models are implemented for the simulation. The paper includes three parts: First, a single spray injected into an initially quiescent constant volume chamber using the Lagrangian approach is simulated to identify the breakup region, which will be considered as a reference to study two-hole impinging jet nozzles. Lagrangian simulation results would be validated via experimental results.

Anti-knock index (AKI) is a metric that can be used to quantify the anti-knock performance of a fuel and is the metric used in the United States. AKI is the average of Research Octane Number (RON) and Motor Octane Number (MON), which are calculated for every fuel on a Cooperative Fuel Research (CFR) engine under controlled conditions according to ASTM test procedures. Fuels with higher AKI have better knock mitigating properties and can be run with a combustion phasing closer to MBT in the knock limited operating region of a gasoline engine. However, fuels with higher AKI tend to be costlier and less environmentally friendly to produce. As an alternative, the anti-knock characteristics of lower AKI fuels can be improved with water injection. In this sense, the water injection increases the ‘effective AKI’ of the fuel.

Introducing water in a diesel engine has been known to decrease peak combustion temperatures and decrease NOx emissions. This however, has been limited to stationary and marine applications due to the requirement of a separate water supply tank in addition to the fuel tank, thereby a two-tank system. Combustion of hydrocarbon fuels produce between 1.35 (Diesel) and 2.55 times (Natural Gas) their mass in water. Techniques for extracting this water from the exhaust flow of an engine have been pursued by the United States department of defense (DOD) for quite some time, as they can potentially reduce the burden of supply of drinking water to front line troops in theater. Such a technology could also be of value to engine manufacturers as it could enable water injection for performance, efficiency and emissions benefits without the drawbacks of a two-tank system.

As unprecedented growth in EV sales is expected, and the number of public charging stations must be planned accordingly as charger up-time and functionality (i.e., availability) is the number one factor for users once the charging system is installed. Electric Vehicle Intended Functionality, Availability, and Equity Inclusion informs current customers and potential purchasers of functionality, availability, and equity inclusion issues with EV charging systems currently in production and in use across North America and Europe. Note that if shortages of available chargers are recognized and exposed across the US, this could then have a negative impact on future potential EV customers from making the “leap” from traditional ICE vehicles to EVs. Click here to access the full SAE EDGETM Research Report portfolio.

As wireless devices and cellular networks continue to evolve, opportuvnities are created for enhancing the overall user experience with telematics related services. This paper discusses the pros and cons of por phone systems and embedded phone systems as conduits for telematics applications. Methods to enhance embedded in-vehicle telematics systems to include operation with handheld wireless devices on both Wide Area Networks (WAN) and Wireless Local Area Networks (WLAN) will also be presented. Services will be discussed that allow vehicles and wireless devices to interact with each other and with remote servers. Implementation options will be explored along with an analysis of the key players in the telematics supply chain (i.e., OEMs, Suppliers, Carriers, Call Centers, Consumers) who ultimately benefit from each approach.