Search Results

Researches and developments of electronic transmission control have been made along with the progresses of electronical technologies in order to meet the requirements of decreasing fuel consumption as well as improving drivability. And nowadays many kinds of electronically controlled transmissions have been applied to a variety of cars. In this paper, a history of electronic transmission control from the first control systems mounted on TOYOTA CORONA in 1970s for the first time in the world to the newest ones having a lock-up function for fluid coupling (Torque Converter) as well as progresses of the respective electronical transmissions to their practical uses will be explained.

As a part of a project to develop high performance, compact and lightweight vehicle radiators, a highly corrosion resistive fin has been developed, especially for use in the salt-laden environment. It is a thin plate with a mutual diffusion layer of Cu-Zn formed on either surface. Owing to this composite structure, not only the corrosion resistance is double that of Cu-Sn alloy fins that are currently in use with a thickness over 20% smaller than the latter (38 μm vs 50 μm), but the corrosion of the bonding solder has been reduced to one half because the Cu-Zn diffused layer has brought about substantial reduction in the fin's surface potential.

This paper introduces a new type of radiator that has been developed with the objective being, high performance (compact size), light weight, and high quality in the field of copper/brass radiators that are superior in heat conduction, lower in price, yet there is still more room for improvement. The development of a new copper/brass radiator with the objective being higher performance (more compact), lighter weight, and higher quality has been completed. The synthetic study covered is not only an in-depth analysis of performance and structure, but the new development of materials and production engineering. As a result, the new radiator has a minimum of 10% increased performance, a minimum of 25% weight reduction, and its corrosion resistance is more than twice that of a conventional radiator.

The new generation engines currently being developed tend to require cold type spark plugs, which are prone to fouling. This paper describes the development of a new Coil on Plug ignition system that resolves this problem by using the high energy and the fast secondary voltage rise time of a capacitive ignition while maintaining inductive ignition characteristics for good ignitability. To evaluate the effectiveness of the system, spark plug insulation resistance was monitored and cold tests were conducted. The results demonstrated that the new ignition system is remarkably effective: insulation resistance remains high and startability and driveability are unaffected under conditions normally leading to excessive misfires and failure to start with a conventional inductive system. To satisfy environmental concerns, automobile manufactures are increasingly turning to high compression ratio engines in view of their improved performance.

1 Attenuation of acoustic noise from automobile components is important for passenger comfort. Since the alternator is one of the major sources of noise, many manufacturers have studied the various mechanisms which generate noise within an alternator as well as the methods to reduce the noise level. This paper presents the dynamic properties of the alternator with respect to the acoustic noise during current generation, and introduces a vibration damping structure based on experimental modal analysis. Rotating magnetic forces in a magnetic circuit (stator and rotor) can excite numerous structural resonances, resulting in acoustic noise. A modal analysis performed on the major magnetic circuit of the alternator (Nippondenso Co., Ltd.) revealed that the stator has elliptic, triangular and rectangular mode shapes in the radial coordinate plane, while the rotor does not have any significant resonances in the same 0 - 3 kHz region.

Concerns on environmental protection are being intensified throughout the world in recent years. Of those concerns, depletion of the ozone layer in the atomosphere caused by CFC emission into the atomosphere is the target of serious concern as shown in Fig. 1. At present, the use of CFC production is restricted by regulations at the global level, and CFC will be phased out by the end of 1995. In this regard, the authors have developed a new vehicle air conditioner to adapt to a new refrigerant HFC-134a, which is gentle to the ozone layer, and to replace CFC-12. The new refrigerant system was introduced to the market in October, 1991, and the replacement will be almost completed by the end of 1993 for the Lexus and Toyota production vehicles. This paper describes the development of the new compressor lubricant, seal rubber, hose and desiccant by taking into consideration the materials concerned and the number of technological issues involved in the new refrigerant, HFC-134a.

In recent years, concerns with global environmental problems have become major issues. Environmental regulations such as fuel consumption/economy, for example, have become very stringent. On the other hand, the pursuit of a comfortable and spacious passenger compartment and reduced engine compartment room have become more progressive. Size and weight reduction of automotive components are necessary to cope with these requirements. With regards to the fuel filter, size reduction of the filter element is the key technology to achieve both component size and weight reduction. As to a fuel filter, the reduction of its size and weight can be accomplished by reducing the size of its element. We have studied this subject and have invented a new type of element structure. Additionally, we have developed a new filter paper which features a favorable combination of contaminant holding capacity and micron rating.

In recent years, designers have attributed increasing importance to reducing noise in car interiors, and various improvements have led to a steady decrease each year in said interior noise. More recently, there has been abundant research on quantitative and qualitative approaches to interior noise, including studies on improving sound quality, such as elimination of rumbling noise and creating a feeling of linearity. Particularly engine noise, one of the major causes of interior noise, has been studied from various angles and significantly reduced in recent years. This has led in turn to increased interest in air induction noise which was a relatively minor noise source in the past. One method of reducing induction noise is the addition of several resonators to the induction system. Induction system components, including resonators, have a major effect on engine output and fuel consumption.

In the diesel field, innovative technology development has been desired for fuel injection system from the points of severe emission reduction to meet increasingly stringent emission regulation year by year respecting environmental protection and product improvement for various customer requirements including fuel consumption improvement. We have been pursuing the ideal fuel injection system which is called “ECD-U2” to meet above expectations. “ECD-U2” is the injection system of highly pressurized fuel with optimum injection timing by using of the injector controlled by high speed response magnetic valve. This system also has the fuel injection pattern controllability in one injection ( injection rate ) as one of the greatest asset. This report focuses on the new injector structure development to achieve desirable injection rate shaping for diesel engine combustion.

This paper describes the development of the two-dimensional semiconductor device simulator called DS2* and its application in automotive power MOSFET design. DS2 clarifies carrier motions in MOSFETs under various operating conditions and calculates the current characteristics in intense electric fields in order to evaluate the device breakdown. Simulation results with p channel power MOSFETs for automotive application indicate that on resistance is significantly dependent on device miniaturization and that device breakdown is caused by one of three mechanisms which are, avalanche from the surface layer, reach through arid punch through.

It is well known that pilot injection is an effective method of reducing diesel knock noise during idling, but no actual system has as yet been commercially produced. With the objective of developing a practicable pilot injection device, simulations were conducted of various simple mechanisms in order to determine the best specifications and analyze the fuel injection characteristics. Based on these results, a chamber expansion type pilot injection device, which enables the injection pump pressure chamber volume to be increased at a given moment during the fuel compression stroke, has been developed and has been found to remarkably decrease knock noise during cold idling. An investigation into the effects of this device on output power, exhaust emissions, cold startability and durability revealed that it is eminently suitable for practical application.

EMI suppresion capacitors and filters are common in automobile electronics today, but they are insufficient for heavy concentrations of wideband electromagnetic radiation. To resolve this problem, a highly-integrated Ceramic Absorber was developed to efficiently shield against frequencies from 1MHz to 1000MHz, which is mountable on the control circuit board easily, as it is the form of a flat plate strip line. This filter provides the signal line with an electromagnetic absorption effect through line transmission characteristics. Research into ceramic materials was required to determine the specific dielectric constants and frequency characteristics of ferroelectric ceramic materials. The development objective was material with optimum dielectric dispersion, as determined from research into energy absorption based on the Debye dielectric dispersion theory.