Search Results

Recent cadaver studies have provided data for the development of force and stiffness characteristics of the side of the human head. A Hybrid III Anthropomorphic Test Dummy (ATD) head was modified to allow direct measurement of impact forces on the parietal and temporal regions by recasting the upper left half of the skull and installing triaxial piezoelectric force transducers. Dynamic impact tests of this modified head were conducted and force/stiffness characteristics for the temporal and parietal areas were compared to existing data on cadaver subjects. It was found that the existing Hybrid III vinyl skin satisfactorily represents the force/stiffness characteristics of the human head in these areas. This modified Hybrid III dummy head was also impacted against typical interior components likely to be contacted during a side impact. The force and acceleration test results are presented.

A positive trend to more frequent use of child restraint systems (CRS) in Sweden, during the last 20 years, is shown in this report. During the same period, the overall injury risk, for different age groups of child occupants, has decreased substantially. This indicates the high effectiveness of the child restraint systems. Children need car occupant safety systems specially designed for their size. This paper clearly states the need for child safety systems and discusses benefits and drawbacks with regard to different restraints, ages and injuries. The analysis points out, that when a crash occurs, the maximum effect of a child restraint system is not reached, if the child is not using the correct system for their size. There is even a tendency that the injury risk increases when children switch from one restraint system to another, i.e. are at the youngest ages for which the specific restraint is recommended. The background data used, is based on Volvo's traffic accident research.

A primary goal within the industry is to shorten the lead time to get shorter time to market and lower cost. System verification can set the limits for how short the lead time can be. Traditionally verification of automotive communication systems like Remote Keyless Entry, RKE, is performed in a complete vehicle late in the product development process. To fulfill the quality demands during the shorter project time Volvo Cars, VCC, has experienced that it is necessary to develop new requirements and verification methods. Six Sigma contains a complete toolbox to do this in a structured and time efficient way. VCC has together with other Ford Motor Company, FMC, brands and the supplier Continental developed methods and requirements so that the RKE system can be verified before vehicles are built. Only a last validation has to be performed in a complete vehicle.

Even though child restraint systems (CRS) are very effective there are still serious problems because of non-use or misuse. This is often due to the fact that the installation of the CRS in the cars is difficult, complicated and unstable. A standardised interface between the CRS and the car seat would solve these problems. Within the IS0 Committee ISO/TC22/SC12NVGl this item has been raised and several proposals for an “ISOFIX have been discussed. Apart from the installation aspects, other features e.g. disconnection of passenger airbags can be included in the system. Several concepts called ISOFlX type 1 to 7 with different working names e.g. DELTAFIX, EASY-FIX, MONOFIX and UNlFlX have been evaluated. The handling performance of some of the prototypes have been tested by customer evaluation with very positive results. Crash performance has also been investigated. The paper will give an update on the latest progress of this development, including a preliminary specification.

Frontal collisions account for the majority of car accidents. Regulations have been in effect since the late sixties, aiming at assuring a basic safety performance for cars in this type of crash. From a legislative point of view tests as e.g. FMVSS 208 are about to be complemented by other frontal impact configurations. Two of the reasons behind this is to allow assessment also of asymmetric loads to the vehicle front and the level of passenger compartment intrusion. This paper offers a comparison of different frontal crash tests, including Volvo's Severe Partial Overlap Collision (SPOC) and offset tests against a deformable barrier. The methods are evaluated with respect to their results, both from a dummy performance point of view and based on car deformation characteristics. Also, the practicability and possible effect on vehicle designs are discussed.

Injuries in side impact collisions constitute one fourth of the serious or fatal injuries sustained by occupants in ordinary passenger cars. The Volvo Side Impact Protection System (SIPS) provides a substantially enhanced protection for car occupants in side collisions. The protection level of the SIPS system has been further increased by the addition of the Sipsbag, a quick-deploying side impact airbag system integrated in the seat backrest. The design of the non-electrical Sipsbag system is explained, as well as the advantages with a completely seat-integrated system. The process to industrialise the side airbag concept is summarised. Laboratory test results are discussed. Using methodology to correlate laboratory test data with accident data, an estimate of the injury-reducing effectiveness of the SIPS and Sipsbag system is made.

Flexible car body production, including prototyping, is one answer to the market targets where customers ask for an increasing number of models / variants and shorter lead time. The in-house interests of car builders are, besides investment and manpower flexibility, also improved product quality. Quality in body in white is mainly related to geometry (= high precision), to make sure that the final assembly shops will have the right conditions to keep customers satisfied (flush in doors, hood, fenders etc.). The consequences are that both the product and the process equipment have to be in a stable condition to guarantee low spread in the complete car-body. CAD technology is one of the keys to reach this goal, where: Off-line tooling Off-line programming Flow simulation Measurement strategy, off-line / in-line are the main powerful tools to reduce lead time as well as costs.

In air bag tests without a restraining seat belt (FMVSS208) several users of the Hybrid III dummy have reported a pelvic interference problem during the tests. An insufficient range of motion and a hard metal to metal contact between the pelvis and femur has lead to unexpected chest acceleration waveforms. The paper gives a mechanical analysis of this phenomenon, explaining how the forces acting on the dummy lead to a rotation of the pelvis and femur and how forces arise between the pelvis and the chest. Finally two sample tests where the pelvic interference problem has occurred are presented.

The performance of three different six-year old dummies, the new Hybrid III six-year-old from First Technology Safety Systems, the Part 572 Subpart I and the TNO P6, was compared in a series of HYGE sled tests. The dummies were tested on aftermarket booster cushions in a Volvo 850 sled buck. Two different sled pulses were used: a Volvo 850 30 mph frontal crash pulse and an ECE R.44 pulse. The behavior of the dummies was compared for these two sled pulses. Motion analysis from high speed film was performed, showing the trajectories of the dummy heads. All dummies were fitted with triaxial accelerometers in the head, chest and pelvis. The Hybrid III was also equipped with a chest deflection transducer and Denton six-channel upper neck and five-channel lumbar spine load cells. The signals from a number of these sensors were compared.

Legal producer responsibility for end-of-life vehicles will be introduced in Sweden 1998. In an ongoing 1-year project the conditions tor a producer-dismantler network are developed, aiming at increased recovery. About 5000 cars of 5 makes are treated by 30 dismantlers. Producers (manufacturers and importers) not actively involved participate in an information feedback program. The producer-initiated project develops interaction with existing expertise and experience of management of sometimes conflicting interests. Urgent questions are cost-effectiveness, recovery methods and markets, dismantling instructions, and monitoring methods. The project is expected to expand into a national network of producer-contracted dismantlers, with possibilities for even further expansion.

A rear seat belt system with a submarining-preventing seat design was developed. The seat has a contoured floor pan with a pronounced ridge at the front end and a seat belt with carefully located attachment points. Sled tests simulating 30 mph barrier crashes were run with both a standard Part 572 dummy and a Part 572 dummy with a modified pelvis. Both dummies had pelvis mounted submarining indicators. Comparative tests were run with a rear seat with a flat floor pan. The tests proved the efficacy of the ridge type seat in preventing submarining as well as giving low injury criteria. The modified pelvis was found to have submarining characteristics slightly different from the Part 572 pelvis. Under certain conditions the submarining indicators were capable of detecting when the lap belt loads the abdomen, but failed in some cases where the pelvis rotation was excessive.

The airbag simulation program DRACR has been revised to include belt routines. The amended program is used to indicate optimal choice of parameters for a driver supplementary airbag system. As a validation, results from sled tests are given and compared with the computer runs. A good agreement is found for the values of the most essential protection criteria such as chest g's and HIC's. The model has proven to be useful in the engineering process of an airbag restraint system. The interrelationship between important input variables is easily studied. Further validation of the model by other teams is encouraged

This article describes an expert system for objective rating of subjective characteristics like driving comfort. The system uses radial basis neural networks that can be trained on any dynamic properties, for example acceleration. Training and retraining can be done in real-time. The system includes a measure of the reliability of automatic judgement, which can be used to signal when new training may be necessary. The article shows in detail how the system has been used to automatically judge gearshift comfort for automatic transmission. Tests indicate that the system's accuracy and consistency are as good as one of Volvo's best experts.

The Inflatable Curtain (IC) has shown great potential to reduce head injuries in side impacts. This study explores and presents enhanced performance in two steps of improved activation algorithms. Crash data analysis, 21 full scale crash tests and component tests in a custom built drop tower rig have been performed. The IC performance in wider crash scenarios, including side impacts outside the occupant compartment (L-type impacts), was evaluated. Both statistical crash data and in-depth studies were used. It was found in the analysis of real life crashes that moderate to fatal head injuries can occur without intrusion in the occupant compartment. In L-type side impacts, the motion of the occupant relative to the vehicle interior may cause a head impact of sufficiently high severity to cause moderate to severe head injuries. A combined analysis of real world crash data and crash test results indicates that a substantial reduction in moderate to fatal head injuries can be achieved.

Under a global impulse for less man-made emissions, the automotive manufacturers search for innovative methods to reduce the fuel consumption and hence the CO2-emissions. Aerodynamics has great potential to aid the emission reduction since aerodynamic drag is an important parameter in the overall driving resistance force. As vehicles are considered bluff bodies, the main drag source is pressure drag, caused by the difference between front and rear pressure. Therefore increasing the base pressure is a key parameter to reduce the aerodynamic drag. From previous research on small-scale and full-scale vehicles, rear-end extensions are known to have a positive effect on the base pressure, enhancing pressure recovery and reducing the wake area. This paper investigates the effect of several parameters of these extensions on the forces, on the surface pressures of an SUV in the Volvo Cars Aerodynamic Wind Tunnel and compares them with numerical results.