Search Results

Standard

Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced 135 °C, 34 500 kPa, Hydraulic and Pneumatic

2015-08-21

CURRENT

MA4095

This SAE Metric Aerospace Standard (MA) defines the requirements for heavy-duty polytetrafluoroethylene (PTFE) lined, para-aramid reinforced, hose assembly suitable for use in 135 °C, 34,500 kPa, aircraft and missile hydraulic fluid systems.

Standard

Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced

2019-04-30

CURRENT

AMS3380E

This specification covers a polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid.

Standard

HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced

1974-12-01

HISTORICAL

AMS3380B

This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.

Standard

HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced

1965-09-01

HISTORICAL

AMS3380A

Standard

Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced

2012-12-11

HISTORICAL

AMS3380D

This specification covers a polytetrafluoroethylene resin in the form of extruded and sintered flexible tube reinforced with wire braid.

Standard

HOSE, POLYTETRAFLUOROETHYLENE TFE Fluorocarbon Resin Wire Braid Reinforced

1983-07-01

HISTORICAL

AMS3380C

This specification covers polytetrafluoroethylene resin in the form of extruded and sintered flexible hose reinforced with wire braid.

Standard

Impulse Testing of Hydraulic Tubing and Fittings, S-N Curve

2013-01-07

CURRENT

AS4265

This aerospace test standard establishes the requirements and procedures for evaluating and comparing the impulse fatigue performance of high pressure hydraulic fittings and tubing. This test method may be used to test similar fluid system components, if desired.

Standard

Impulse Testing of Hydraulic Hose, Tubing and Fitting Assemblies

2007-08-13

HISTORICAL

MA2002A

This standard establishes the requirements and the procedures for impulse testing of hose assemblies, tubing, and fittings for use in aerospace metric hydraulic systems.

Standard

Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric

2015-08-21

CURRENT

MA2079

This Aerospace Standard covers hose assemblies intended for use in aircraft high temperature fluid systems. The specified temperature range is -55°C (-67°F) to +204°C (400°F). Operating pressures are listed in Table I.

Standard

IMPULSE TESTING OF HYDRAULIC HOSE, TUBING AND FITTING ASSEMBLIES

1981-10-01

HISTORICAL

MA2002

This standard establishes the requirements and the procedures for impulse testing of hose assemblies, tubing, and fittings for use in aerospace metric hydraulic systems.

Standard

THERMAL SHOCK TESTING OF FLUID SYSTEM PIPING AND FITTINGS

1981-07-01

HISTORICAL

MA2004

This standard provides an environmental performance test method for thermal shock testing of fluid system piping and fittings, excluding hose and hose assemblies.

Standard

Thermal Shock Testing of Fluid System Piping and Fittings

2015-08-21

CURRENT

MA2004A

This standard provides an environmental performance test method for thermal shock testing of fluid system piping and fittings, excluded hose and hose assemblies.

Standard

CAP ASSEMBLY, PROTECTIVE CLOSURE BEAM SEAL FITTING, LOW PRESSURE, METRIC

2017-03-03

CURRENT

MA4248B

Standard

CAP ASSEMBLY, PROTECTIVE CLOSURE, BEAM SEAL FITTING, LOW PRESSURE, METRIC

2004-07-15

HISTORICAL

MA4248

Standard

CAP ASSEMBLY, PROTECTIVE CLOSURE BEAM SEAL FITTING, LOW PRESSURE, METRIC

2012-02-23

HISTORICAL

MA4248A

Standard

Clamps, Support, Comparative Fatigue Strengths, Test Method

2007-08-14

HISTORICAL

ARP1974

This recommended practice establishes vibration and transmissibility test procedures which compare the relative strengths of various loop and saddle type support clamps. This procedure is intended for conducting fatigue testing which is standard throughout the aerospace industry thereby establishing a clamp strength comparison which can be used in an evaluation process. The testing required by this recommended practice ensures that clamps will meet adequate fatigue requirements only. It does not infer qualification of the clamp installation techniques or its ability to meet in-service environments or operating conditions. Separate qualification testing should be performed to ensure satisfactory service of the installed clamp.

Standard

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, HEAVY-DUTY, 275 °F, 3000 psi FLARELESS TITANIUM FITTINGS, INCLUDING JUMP SIZE, 45° TO 90°

2004-06-30

HISTORICAL

AS4628B

Standard

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, HEAVY-DUTY, 275 °F, 3000 psi FLARELESS TITANIUM FITTINGS, INCLUDING JUMP SIZE, 45° TO 45°

2004-06-30

HISTORICAL

AS4627B

Standard

FITTING, ADAPTER, STRAIGHT, EXTERNAL SWAGE TO FLANGE, FLARELESS

2020-04-28

CURRENT

AS6483

Standard

CLAMP, LOOP, CUSHIONED, ELONGATED, METRIC

2020-12-29

CURRENT

MA14272A