Refine Your Search

Search Results

Standard

Seamless Copper Tube

1986-05-01
HISTORICAL
J528_198605
This SAE Standard covers minimum requirements for soft (061) annealed seamless copper tube intended for automotive and general purposes. (Comparable specifications are ASTM B 75. Other copper tube is covered in SAE J463.) The tube shall be cold drawn to size and after forming shall be annealed in such a manner as to produce a finished product which will meet all requirements of this standard.
Standard

Seamless Copper Tube

1980-01-01
HISTORICAL
J528_198001
This SAE Standard covers minimum requirements for soft (061) annealed seamless copper tube intended for automotive and general purposes. (Comparable specifications are ASTM B 75. Other copper tube is covered in SAE J463.) The tube shall be cold drawn to size and after forming shall be annealed in such a manner as to produce a finished product which will meet all requirements of this standard.
Standard

Seamless Copper Tube

2006-06-29
CURRENT
J528_200606
This SAE Standard covers minimum requirements for soft (061) annealed seamless copper tube intended for automotive and general purposes. (Comparable specifications are ASTM B 75. Other copper tube is covered in SAE J463.) The tube shall be cold drawn to size and after forming shall be annealed in such a manner as to produce a finished product which will meet all requirements of this standard.
Standard

Seamless Copper Tube

1991-06-01
HISTORICAL
J528_199106
This SAE Standard covers minimum requirements for soft (061) annealed seamless copper tube intended for automotive and general purposes. (Comparable specifications are ASTM B 75. Other copper tube is covered in SAE J463.) The tube shall be cold drawn to size and after forming shall be annealed in such a manner as to produce a finished product which will meet all requirements of this standard.
Standard

Seamless Copper-Nickel 90-10 Tubing

1994-06-02
HISTORICAL
J1650_199406
This SAE Standard covers seamless copper-nickel tubing for use in hydraulic brake pressure conductors, general automotive applications, and other similar uses.
Standard

Seamless Copper-Nickel 90-10 Tubing

2011-12-06
CURRENT
J1650_201112
This SAE Standard covers seamless copper-nickel tubing for use in hydraulic brake pressure conductors, general automotive applications, and other similar uses.
Standard

Seamless Copper-Nickel 90-10 Tubing

1997-10-01
HISTORICAL
J1650_199710
This SAE Standard covers seamless copper-nickel tubing for use in hydraulic brake pressure conductors, general automotive applications, and other similar uses.
Standard

Seamless Copper-Nickel 90-10 Tubing

1993-03-01
HISTORICAL
J1650_199303
This SAE Standard covers seamless copper-nickel tubing for use in hydraulic brake pressure conductors, general automotive applications, and other similar uses.
Standard

Carbon Steel Tubing for General Use - Understanding Nondestructive Testing for Carbon Steel Tubing

2006-06-26
HISTORICAL
J2592_200606
This SAE information report provides a means to understand the various methods of evaluating the integrity of steel tubing without the need of destroying the tubing. This report describes eddy current testing, flux leakage testing, ultrasonic testing, and magnetic particle testing of steel tubing. The primary purpose of these methods of testing steel tubing is to look for flaws in the tubing, such as discontinuities, seams, cracks, holes, voids and other imperfections characteristic to the specific construction of the tubing.
Standard

Carbon Steel Tubing for General Use Understanding Nondestructive Testing for Carbon Steel Tubing

2019-01-04
CURRENT
J2592_201901
This Information Report describes eddy current testing, flux leakage testing, ultrasonic testing, and magnetic particle testing of steel tubing. The purpose of these testing methods is to expose flaws in the tube material or weld zone, such as discontinuities, seams, cracks, holes, voids, and other imperfections characteristic to the specific construction of the tubing. When agreed upon between the producer and purchaser, nondestructive testing is used in lieu of destructive hydrostatic pressure proof testing. Aircraft and Aerospace applications were not considered during the preparation of this document.
Standard

Carbon Steel Tubing for General Use - Understanding Nondestructive Testing for Carbon Steel Tubing

2013-05-14
HISTORICAL
J2592_201305
This SAE information report provides a means to understand the various methods of evaluating the integrity of steel tubing without the need of destroying the tubing. This report describes eddy current testing, flux leakage testing, ultrasonic testing, and magnetic particle testing of steel tubing. The primary purpose of these methods of testing steel tubing is to look for flaws in the tubing, such as discontinuities, seams, cracks, holes, voids and other imperfections characteristic to the specific construction of the tubing.
Standard

Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved, Annealed for Bending, Double Flaring, Cold Forming, and Brazing

2019-02-27
CURRENT
J2832_201902
This SAE Standard covers stress relieved electric resistance welded flash controlled single wall high strength low alloy steel tubing intended for use in high-pressure hydraulic lines and in other applications requiring tubing of a quality suitable for bending, double flaring,cold forming and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path caused by the ID weld bead. The grade of material produced to this specification is of micro-alloy content. Nominal reference working pressures for this tubing are listed in ISO 10763 and SAE J1065. Brazed and/or welded tube assembly configurations made to specific geometry and components in association with this material may require qualification testing in accordance with ISO 19879. Cold forming the tube end configurations avoids this systemic testing by not compromising the structural integrity of the tube material.
Standard

Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Double Flaring

2009-08-18
HISTORICAL
J2832_200908
This SAE Standard covers stress relieved electric resistance welded flash controlled single wall high strength low alloy steel tubing intended for use in high pressure hydraulic lines and in other applications requiring tubing of a quality suitable for bending, double flaring and cold forming. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead. The grade of material produced to this specification is of micro-alloy content and is considerably stronger and intended to service higher pressure applications using thinner walls than like sizes of the grades of material specified in SAE J356, SAE J2435 and SAE J2613. Due to the alloy content of the material, the forming characteristics of the finished tube are equal to or better, when compared to SAE J356, SAE J2435 and SAE J2613. Nominal reference working pressures for this tubing are listed in ISO 10763 and SAE J1065.
Standard

Metallic Tube Conductor Assemblies for Fluid Power and General Use--Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

2003-07-29
HISTORICAL
J2658_200307
This SAE Standard specifies uniform methods for various typesof tests to evaluate functional performance requirements formetallic tube conductor assemblies for hydraulic fluid powerapplications made from both standard and non-standard metallictubing and components. See the appropriate listed SAE or ISOtubing and connector standard for chemical, mechanical anddimensional requirements for standard tubing, end components andtube end joint configurations for the standard tube assembliesbeing tested. See SAE J 1065 and ISO 10763 for listed nominalreference working pressures and/or reference formula that may beused to calculate reference working pressures for standard andnon-standard metallic tube conductors.
Standard

Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

2010-03-09
HISTORICAL
J2658_201003
This SAE standard recommends the use of ISO 19879 to perform various types of tests to evaluate functional performance requirements for carbon and steel alloy tube conductor assemblies for hydraulic fluid power applications made from both standard and non-standard metallic tubing and components. See the appropriate listed SAE or ISO tubing and connector standard for chemical, mechanical and dimensional requirements for standard tubing, end components and tube end joint configurations for the standard tube assemblies being tested. See SAE J1065 and ISO 10763 for listed nominal reference working pressures and/or reference formula that may be used to calculate referenceworking pressures for standard and non-standard metallic tube conductors.
Standard

Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

2013-09-25
CURRENT
J2658_201309
This SAE standard recommends the use of ISO 19879 to perform various types of tests to evaluate functional performance requirements for carbon and steel alloy tube conductor assemblies for hydraulic fluid power applications made from both standard and non-standard metallic tubing and components. See the appropriate listed SAE or ISO tubing and connector standard for chemical, mechanical and dimensional requirements for standard tubing, end components and tube end joint configurations for the standard tube assemblies being tested. See SAE J1065 and ISO 10763 for listed nominal reference working pressures and/or reference formula that may be used to calculate referenceworking pressures for standard and non-standard metallic tube conductors.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing

1992-03-01
HISTORICAL
J1065_199203
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE standards listed in the reference section. Purpose The purpose of this document is to provide nominal reference working pressures for selecting tube material, OD size and wall thickness for given hydraulic system working pressures based on desired 4 to 1 design factor of the applicable burst pressure rating.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing

2003-02-05
HISTORICAL
J1065_200302
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE standards listed in the reference section. Purpose The purpose of this document is to provide nominal reference working pressures for selecting tube material, OD size and wall thickness for given hydraulic system working pressures based on desired 4 to 1 design factor of the applicable burst pressure rating.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing

2016-05-20
CURRENT
J1065_201605
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE and ISO standards listed in the reference section.
Standard

Nominal Reference Working Pressures for Steel Hydraulic Tubing

2009-09-28
HISTORICAL
J1065_200909
This SAE Information Report is intended to provide design guidance in the selection of steel tubing and related tube fittings for general hydraulic system applications. The information presented herein is based on tubing products which conform to SAE and ISO standards listed in the reference section.
X