Search Results

F-35 manufacturing ergonomics addressed Human-factors simulation from Delmia is playing a key role as Northrop Grumman tools up for work on the Joint Strike Fighter. Keeping it together: design, development, and maintenance It is only in relatively recent years that the full meaning of integrating manufacturing and maintenance as part of the design and development processes has been grasped by the aerospace industry. Exploring the boundaries of our solar system SAE 100 Future look: In addition to helping enable NASA's new vision of taking humans back to the moon and paving the way to Mars and beyond, two robotics space science missions are preparing to explore the outermost and innermost edges of our solar system. What's on the horizon for space SAE 100 Future look: Dramatic changes in the Earth's climate are certain to drive humanity's search for alternative fuel sources.

Quality in the integrated product team In the early phases of product development, quality must be engineered and managed into the product. Advancing icing detection Engineers are working to develop a capability to detect icing conditions ahead of aircraft using onboard and ground-based remote sensing systems. Testing times Methods for testing aircraft engines have changed dramatically over the years for Rolls-Royce- almost as much as the engines themselves. This is the last installment of a three-part series on aircraft engine testing.

Reverse Engineering the Boeing E-3 Sentry's Secondary Flight Controls Vanadium - A Green Metal Critical to Aerospace and Clean Energy Thrust in Space - The Nuances of Thruster Valve Design 3D Printing Aerodynamic Improvements Cryogenic-Capable Isolators Improve the Performance of Millimeter-Wave Systems by Lowering Noise Levels Detection with Quantum Radar A new radar prototype utilizes quantum entanglement as a method of object detection. Preliminary Development of an Integrated Mobility, Lethality, and Survivability Soldier Performance Testing Platform Developing a methodology that incorporates objective measures of performance and is sensitive to changes in soldier-system equipment could help guide equipment manufacturers during product development and acquisition. Bore Elevation and Azimuth Measurement System (Beams) Newly developed laser apparatus verifies that the pointing accuracy requirement of a weapon's fire control system is met.

Radiation-Tolerant FPGAs Solve Spacecraft Design Challenges Thermal Management for Directed Energy Weapons New Diamond Super-Material Enhances Aircraft Survivability Development of a Secure Private Neural Network Capability From DC to Daylight - How Innovations in Microwave Absorbers Shield the Warfighter Army Advances Materials for New Low-Profile Antenna Directed-Energy System to Defeat Small Unmanned Aircraft System Swarms New weapons technology is needed to combat the proliferation of small unmanned aircraft systems (sUAS), miniaturization of sensor technology, and advancement of UAS swarm logic that will enable swarms of sUAS to threaten US airbases by the 2025 timeframe.

Why are Aerospace & Defense Companies Embracing Additive Manufacturing? Simplifying Power Design with Modular Architectures The Role of DevSecOps in Modern Edge Systems Making Machines Curious Designing Multi-Channel Microwave Radio Systems Using Optical Interconnects Solving Military Satellite, Radar and 5G Communications Challenges with GaN-on-SiC MMIC Power Amplifiers Advanced Airborne Defensive Laser for Incorporation on Strike Fighter Aircraft A technical and operational analysis of an airborne "hard-kill" Ytterbium fiber laser-based anti-missile system for use on strike fighters. Additive Manufacturing Utilizing a Novel In-Line Mixing System for Design of Functionally Graded Ceramic Composites Exploring the development of a direct ink writing system with multimaterial and in-line mixing capabilities for printing inks composed of high solids-loaded ceramic particulate suspensions.

Artificial Intelligence in the Battlespace Key Considerations for a New Way of Fighting War Machining Beryllium Electrified Propulsion for Aerospace Where to Start The Future of Managing Mission-Critical Systems Improving Battlefield Connectivity for the Modern Warfighter How to Test a Cognitive EW System Molded RF Materials for Hypersonic Sensors and Seekers AUVSI XPONENTIAL Multimode Optical Fiber Sensing Although the vast majority of fiber optic strain sensors use single mode fiber, multimode fiber has a higher nonlinear threshold that enables higher light levels and lower noise, while the diversity of spatial modes can be used to develop sensors that are inherently immune to signal fading. Autonomous and Resilient Management of All-Source Sensors for Navigation Assurance As the number and type of sensors informing a system increases, so does the probability of corrupting the system with sensor modeling errors, signal interference, and undetected faults.

Giving ice the boot Atmospheric icing was for many years one of the majoy threats to aircraft safety- and it potentially still is. Researchers at Dunlop Aviation Ice Protection and Composites continue their development of deicing and anti-icing technologies. The art of wing assembly Airbus Industries investigates new technologies and techniques for improving quality and reducing cost of its wing box assemblies. Affordable engines for small aircraft A look into the new technologies developed for small-aircraft engines as extensions to the cooperative agreements under the NASA General Aviation Propulsion program conclude.

Next-generation space transportation NASA narrows its search for a successor to the Space Shuttle. Air-traffic-control modernization "Aerospace Engineering" provides an update of the latest air-traffic management activities taking place in the U.S. and China. Aircraft undercarriage concept Engineers at SUS21 Co. Inc. and the Kyoto Institute of Technology have developed an aircraft suspension system that features shock isolation to reduce abrupt deceleration and impact force on aircraft wheels. Simulating Superplastic forming BAE Systems' engineers developed modeling tools and techniques to optimize superplastic forming of titanium structures.

Powering Better Battlefield Drones Using Low-Frequency Broadband Sonar on UUVs Experimenting in Realistic Environments Gets NewTechnology to Warfighters Designing Rugged SWaP-Optimized MOSA Solutions for UUVs Does Your UAV Program Need a Transponder? Understanding the Requirements and Guidelines Developing New Anti-Drone Radar Technology Deceiving the Enemy: These Are the Drones You Are Looking For By developing UAVs for physical deception roles to shape an adversary's ability to visually observe and orient to situations, the US military can decrease risk to air and ground combatants during mission execution by causing adversaries to expend resources, delay their reactions, or react incorrectly to tactical situations.

Empowering Soldiers Through ISPDS Dispensable Gels vs Gap Filler Pads An Analysis of Thermal Management Materials Electronic Warfare Vying for Control of the Electromagnetic Spectrum More Bang for the Buck A New Design and Manufacturing Method for Deep Penetrating Bomb Cases A Comprehensive Way to Use Bonding to Improve RF Performance of Low Noise Amplifiers Army and Universities Deploy New Warfighter Communication Technology Radiation Effects on Electronics in Aligned Carbon Nanotube Technology (RadCNT) Characterizing the fundamental mechanisms and charge transport phenomena governing the interactions between ionizing and non-ionizing radiation with carbon-based (nanotube and graphene) field-effect transistors (FETs) devices and integrated circuits (ICs).

Casting a vote for alloys Bringing lighter weight, improved performance, and enhanced repairability to airframes and engines. A sense of the future for UAVs Providing the unblinking eye for intelligence, surveillance, and reconnaissance. Light material brings heavy challenges Shift from aluminum to composites requires major changes in equipment, software. Ryan's 'Research' put to good use The Southwest Research Institue engineer assumes SAE President duties for 2008.

Explosion suppressant arresting foam Technological refinements over three decades have enabled a family of polyerethane foams to aid in the prevention of catastrophic explosions caused by electrical arching, lightning strikes, and static electrical discharge. Improving SA via HUD Engineers from Honeywell and BAE Systems address the saftety and avionics issues inherent in the anticipated increase in air traffic.

Closer to completion The International Space Station proves to be an ongoing engineering experiment with an ultimate goal of becoming a human space-living reality. High-speed interconnects An industry expert from Tyco Electronics explores emerging electronics applications in the aerospace and defense markets that involve the transfer of large volumes of high-speed data. Collaboration software Interactive product development tools are now widely available, and they can decrease design time and cast, improve quality, and help generate new business. Introducing Dr. Jack E. Thompson, SAE President for 2003 A change agent with early roots in the automotive industry gets in the Society's driver's seat for 2003.

Management promotes sharing The extensive use of CAD tools in aerospace design brings many benefits, but also a number of challenges. Getting robots to multi-task The demand to fulfill continually increasing customer requirements forces suppliers to offer state-of-the-art system manufacturing solutions.

Making an impact in fastening Engineers at Electroimpact help the company get a leg up on the competition in automated fastening. Narrowing in on military requirements UAVs/UCAVs are increasingly important, with the accent on integration- and wider engine choice. Machining and turning centers take center stage Makers of CNC machining equipment are incorporating more and better functionality into their products so users cope better with processing challenges such as those posed by tough new grades of aerospace materials. Open (and often) communication As aircraft companies battle for market share, uniting design and manufacturing teams remains a key challenge.

Showing how it's done Engineers are using software to better manage product development data, and applying tools to a new class of problems. NASA goes deep The agency's new long-term space exploration program starts with a return to the moon and will ultimately enable future exploration of Mars and other solar system destinations. Farnborough preview In an event that happens just once every two years, bringing the multitudes together, it is important to get as much technology as possible into the open and to find solutions to hard problems. Seats under crash loading The FAA and academia have conducted aircraft seat drop tests to compare and contrast passenger crash protection. A fluid approach Aerospace engineers have started using CFD software earlier and earlier in the design process.

From concept in mind to product in hand Compatibility between tools for design and manufacturing engineers is improving, though it's still fraught with potential pitfalls. Cockpits on display Larger (and eventually bendable) flight displays use commercial technology for both new production and retrofit applications. Interior interests Makers of business aircraft take different approaches to designing interiors. Aerospace proves its metal Aluminum lithium, magnesium alloys, titanium metal matrix composites, and advanced coatings are all part of the future of flying.

Electrifying Aviation: The Path to Decarbonizing the Skies /Electric aviation mirrors the early stages of the electric vehicle revolution Advances in Military Avionics Technologies Create New Challenges for RF Test and Measurement Plasma Electrolytic Oxidation: The Future of Lightweight Designs in Aerospace and Defense Advanced RF Simulation Reduces Cost and Schedule Risk Assure 5G NTN Performance Before Launch In the complex and quickly evolving 5G NTN landscape, simulating, emulating, and evaluating RF systems boosts mission success. Qualification of Multi-Channel Direction Finding Radar Receivers in The Lab Bullet Impact Testing of Ammunition and Explosives at Picatinny Arsenal A bullet impact (BI) test for evaluating the response of energetically loaded items has been established at the U.S. Army Combat Capabilities Command (DEVCOM) Armaments Center (AC) Explosive Development Facility.

Carbon fiber gets bigger footprint Manufacturers strive for the Holy Grail of composites manufacturing: consistency and repeatability. Safety on the floor Once add-ons that brought almost as many problems as benefits, safety techniques are now being designed into equipment before start-up. Taking measures of the machine New requirements and technologies advance the art of test and sensing. Looking, listening, recording, analyzing HUMS is established as an integral part of aviation's safety network, but more standardization is needed to broaden its effectiveness.

STOVL propulsion-onward and upward Rolls-Royce's unique Pegasus engine has made possible a generation of vertical-landing military aircraft. Testing solutions This special section highlights some of the latest equipment used by engineers to validate new technologies.