Search Results

The work presented in this paper summarizes the early results of an integrated advanced water recovery system test conducted by the Crew and Thermal Systems Division (CTSD) at NASA-Johnson Space Center (JSC). The system design and the results of the first two months of operation are presented. The overall objective of this test is to demonstrate the capability of an integrated advanced water recovery system to produce potable quality water for at least six months. Each subsystem is designed for operation in microgravity. The primary treatment system consists of a biological system for organic carbon and ammonia removal. Dissolved solids are removed by reverse osmosis and air evaporation systems. Finally, ion exchange technology in combination with photolysis or photocatalysis is used for polishing of the effluent water stream. The wastewater stream consists of urine and urine flush water, hygiene wastewater and a simulated humidity condensate.

Processes to remove and recover carbon dioxide (CO2) and water vapor from air are essential for successful long-duration space missions. This paper presents results of a developmental program focused on the use of a liquid- sorbent/membrane-contactor (LSMC) system for removal of CO2 and water vapor from air. In this system, air from the spacecraft cabin atmosphere is circulated through one side of a hollow-fiber membrane contactor. On the other side of the membrane contactor is flowed a liquid sorbent, which absorbs the CO2 and water vapor from the feed air. The liquid sorbent is then heated to desorb the CO2 and water vapor. The CO2 is subsequently removed from the system as a concentrated gas stream, whereas the water vapor is condensed, producing a water stream. A breadboard system based on this technology was designed and constructed. Tests showed that the LSMC breadboard system can produce a CO2 stream and a liquid- water stream.

Long duration missions in space will require regenerative processes to recover water for crew reuse. Membrane processes are attractive as a primary processor in water recovery systems (WRS) because of their design simplicity, low specific energy requirements, small size, and high water recovery. However, fouling has historically been regarded as a disadvantage of membrane-based processes. This fouling is often caused by micelle buildup on the membrane surface by high-molecular-weight organics (e.g., from soaps and laundry detergents). This paper describes a two-stage fouling-resistant ultrafiltration (UF)/reverse osmosis (RO) prototype subsystem, which was designed and constructed for a WRS in the Life Support Systems Integration Facility (LSSIF) at NASA Johnson Space Center (NASA/JSC). The first stage of the subsystem is a tube-side-feed hollow-fiber UF module that removes contaminants that tend to foul spiral-wound modules.