Search Results

The development of the More-Electric Engine (MEE) concept will see an expansion in the power levels, functionality and criticality of electrical systems within engines. However, to date, these more critical electrical systems have not been accounted for in existing engine certification standards. To begin to address this gap, this paper conducts a review of current engine certification standards in order to determine how these standards will impact on the design requirements of More-Electric Engine (MEE) electrical system architectures. The paper focuses on determining two key architectural requirements: the number of individual failures an architecture can accommodate and still remain functional and the rate at which these failures are allowed to occur.

The More Electric Aircraft (MEA) concept coupled with recent advances in power electronics has seen an increasing number of on-board tasks being facilitated by electrical power, as opposed to more conventional hydraulic, mechanical and pneumatic power systems. The migration to a predominantly electrical power system is expected to bring significant cost and performance benefits; however, the devices used to facilitate this change have led to an increasingly complicated electrical power system with heightened levels of system sophistication and interdependence. These developments have the potential to drastically alter the solution space of all feasible aircraft Electrical Power System (EPS) designs. The technological advancements facilitating the MEA progression have allowed for a broader range of design solutions to exist that increase the size of the solution space. Meanwhile increasing system sophistication has led to an increasingly non-linear and complex solution space.

With the diversity of mission capability and the associated requirement for more advanced technologies, designing modern unmanned aerial vehicle (UAV) systems is an especially challenging task. In particular, the increasing reliance on the electrical power system for delivering key aircraft functions, both electrical and mechanical, requires that a systems-approach be employed in their development. A key factor in this process is the use of modeling and simulation to inform upon critical design choices made. However, effective systems-level simulation of complex UAV power systems presents many challenges, which must be addressed to maximize the value of such methods. This paper presents the initial stages of a power system design process for a medium altitude long endurance (MALE) UAV focusing particularly on the development of three full candidate architecture models and associated technologies.

Modern aerospace power systems commonly make use of uncontrolled rectifiers to satisfy many power conversion needs on board the aircraft. Whilst being highly accurate, an analytically detailed simulation of the aircraft power system, which includes all electric machine dynamics, semiconductor switching states, and power system dynamics, is often very computationally demanding. Average-value models of power electronic converters, with their reduced computational requirement, offer one potential solution to this issue. However, of the many converter topologies presented in the literature, average-value models of uncontrolled diode rectifiers are perhaps the most challenging to develop. The dependence of the rectifier's operating state on its loading conditions and the surrounding network topology complicates the derivation of average-value models.

In addition to providing thrust, the engines on conventional civil jet airliners generate power for on-board systems and ancillary loads in the form of pneumatic, hydraulic and electrical power. Reduced fuel-burn and efficiency targets have driven the move towards More Electric Aircraft (MEA) technology which seeks to replace hydraulic and pneumatic loads with electrical equivalents. This technological shift, in conjunction with a growing electrical power load per passenger in general, has greatly increased the electrical power demands of aircraft in recent years - over 1 MVA for the Boeing 787 for example. With increasing fuel prices, there is a growing need to optimise efficiency of power extraction from the aircraft engines for the electrical system and loads. In particular, the utilisation of multi-shaft power off-takes, interconnected generation and power sharing between shafts is thought to offer potentially significant engine operability and fuel efficiency benefits.

NASA has compiled a set of research goals for five year periods starting 2015, 2020 and 2025 for three classes of future subsonic aircraft, N+1 (2015), N+2 (2020) and N+3 (2025). With the intention of progressively making reductions in noise emissions, greenhouse gas emissions, fuel burn and energy consumption at each of these points to achieve Technology Readiness Levels (TRL's) of between 4 and 6. In the last few years much progress has been made towards achieving these goals through the development of new technologies and designs. This paper assesses how the current More Electric Aircraft (MEA) design concepts are advancing to allow the near term, N+1 goals of reducing 32 dB of noise emissions, 60% of the landing and take-off (LTO) NOx emissions, 55% of cruise emissions and 33% saving of fuel burn and energy consumption, relative to single aisle B737-800, could be met and eventually surpassed.

The aviation industry has witnessed a technological shift towards the More Electric Aircraft (MEA) concept. This shift has been driven by a number of perceived benefits including performance optimization and reduced life-cycle costs. Increased electrification within MEA has made aircraft electrical networks larger and more complex and this necessitates an increased electrical power offtake from the engine. The paralleling of multiple generation sources across the aircraft is one potential design approach which could help improve engine operability and fuel efficiency within more-electric aircraft platforms. Accordingly, this paper will investigate options for the realization of paralleled generation systems within the context of current design and certification rules. The paper first illustrates, through simulation, that MIL-STD-704F voltage envelopes may be breached for some interconnected electrical architectures under fault conditions.