Search Results

Standard

GUIDANCE FOR STANDARD SUBDIVISION OF ATA SPEC. 100 FOR NUMBERING SYSTEM FOR AVIONICS

1971-10-06

CURRENT

ARINC421

This guidance standard was prepared in response to a need stated by air transport operators for uniformity in further subdividing the ATA Spec. 100 number system to better accommodate avionics systems. The ATA numbers are widely used in the maintenance community for inventory control, instruction manuals and equipment modification Service Bulletins.

Standard

PRODUCT DEVELOPMENT GUIDANCE FOR MAINTAINABILITY AND TESTABILITY (PMDMAT)

2015-07-10

CURRENT

ARINC847

ARINC Report 847: Product Development Guidance for Maintainability and Testability (PDMaT) is intended to be used as guidance to enhance the design of avionic equipment, with a focus on maintainability and testability characteristics. It is a separate and parallel standard to ARINC Report 607: Design Guidance for Avionic Equipment. This document does not represent the complete formula for successfully designing and manufacturing avionics equipment or system. It does present the vision of the airline community based on extensive experience gained through the use of such equipment.

Standard

STRATEGIES TO ADDRESS ELECTRONIC COMPONENT OBSOLESCENCE IN COMMERCIAL AIRCRAFT

2000-04-07

CURRENT

ARINC662

This standard establishes guidelines that should be observed during initial design, production and maintenance of avionics LRUs, and to present short-term strategies to minimize costs and impacts associated with decreasing availability of electronic components.

Standard

LOADABLE SOFTWARE STANDARDS

2016-07-14

CURRENT

ARINC665-4

This document defines the aircraft industry's standards for Loadable Software Parts (LSPs) and Media Set Parts (MSPs). It describes the common principles and rules to be applied to any part of a data load system to ensure compatibility and inter-operability. It includes part numbering, content, labeling, and formatting of an LSP, and a Media Set containing LSPs.

Standard

CABIN EQUIPMENT INTERFACES PART 3 IN-FLIGHT ENTERTAINMENT SYSTEM (IFES) TO AIRCRACT SYSTEM INTERFACES

2005-08-12

CURRENT

ARINC665-3

This standard defines standards for loadable software parts and software transport media. It describes the principles and rules to be applied to any part of a data load system, to ensure compatibility and interoperability. It includes part numbering, content, labeling and formatting of loadable software parts and software transport media.

Standard

ELECTRONIC DISTRIBUTION OF SOFTWARE

2002-05-17

CURRENT

ARINC666

This document describes a secure internet facility for sending all types of aviation software using the world wide web (www). Software suppliers may use this document as a starting point for the construction of a secure web server utility. It provides sufficient flexibility and is compatible with numerous software distribution models. The file management structure is consistent with other ARINC standards for loadable software, and references ARINC 665 and ARINC 667 in particular.

Standard

GUIDANCE FOR LEAD-BASED SOLDERING, REPAIR AND REWORK

2004-11-12

CURRENT

ARINC669

This document provides guidance for using industry standards for developing a soldering program tailored to meet the specific requirements of the user. Moreover, it provides uniform guidance for maintenance facilities based on industry standards and, therefore, should be accepted throughout the air transport industry. This document is not a stand-alone document - it is intended to be used with the referenced international industry standards.

Standard

GUIDANCE FOR THE TRANSITION TO LEAD-FREE SOLDERING, MAINTENANCE, AND REPAIR

2006-03-15

CURRENT

ARINC671

This document provides guidance for the use of international standards for the maintenance of lead-free electronic equipment. The purpose is to assist manufacturers, maintenance facilities, and operators to define lead-free soldering requirements and to minimize the set of lead-free solders, processes, and practices to gain consistency across the industry.

Standard

GUIDANCE FOR AVIONICS SOFTWARE MANAGEMENT

1993-01-15

CURRENT

ARINC652

This standard is a top-level design guide for managing the development and maintenance of avionics software. It provides guidance for the design and development of avionics software for traditional ARINC 700-series equipment and IMA. This standard emphasizes the airline desire for user-modifiable software.

Standard

LOGICAL SOFTWARE PART PACKAGING FOR TRANSPORT

2015-07-31

CURRENT

ARINC641

The purpose of this standard is to provide a method for packaging aircraft software parts for distribution using contemporary media or by electronic distribution. This project intends to standardize and provide guidance for the storage of floppy based software, currently packaged in media set parts. This standard format can be then stored or distributed on a single physical media member (CD-ROM), or by electronic crate. The obsolescence of floppy disks drive an urgent need for this guidance.

Standard

INDUSTRY GUIDE FOR COMPONENT TEST DEVELOPMENT AND MANAGEMENT

2012-11-07

CURRENT

ARINC625-3

This standard provides guidance to those who develop avionics test programs and the source documentation on which they are based. This includes guidelines for all steps and phases within the TPS life cycle.

Standard

PROGRAMMERS GUIDE FOR SMART SYSTEMS USING ARINC 626 ATLAS

2002-06-30

CURRENT

ARINC627-2

This standard provides guidance to ATLAS test programmers for developing, writing and documenting test programs in ARINC 626 ATLAS. This is a companion standard to ARINC 608A, Design Guidance for Avionics Test Equipment. It provides guidance to managers and system integrators for standardizing test programs and their documentation.

Standard

ELECTRONIC DISTRIBUTION OF SOFTWARE BY CRATE (EDS CRATE)

2010-09-15

CURRENT

ARINC827

This standard describes the format for electronic distribution of aircraft software parts and other contents between aerospace business partners using a digital container referred to as an EDS crate. This EDS standard is intended to promote consistent, secure distribution of EDS content to any appropriate destination.

Standard

STANDARD FIRMWARE LOADER FOR AVIONICS SHOPS

1989-09-30

CURRENT

ARINC614

This standard describes the characteristics of a standard firmware loader for avionic shops. It is capable of copying digital information into memory devices installed in circuit card assemblies, Line Replaceable Modules (LRMs) and On-Board Replaceable Modules (OBRMs). It contains the recommendations of the air transport community concerning the design and development of firmware loader equipment.

Standard

GUIDANCE FOR ELECTROSTATIC SENSITIVE DEVICE UTILIZATION AND PROTECTION

2004-11-12

CURRENT

ARINC606A

This document provides guidance for using industry standards for developing an ESD control program tailored to meet specific user requirements. In addition, it provides uniform guidance for maintenance facilities based on industry ESD standards, and therefore should be accepted throughout the air transport industry. This document is not a stand-alone document - it is intended to be used with the referenced international industry standards.

Standard

DESIGN GUIDANCE FOR AVIONICS TEST EQUIPMENT

1993-01-15

CURRENT

ARINC608A

This standard is a top-level guidance standard intended for the design of Automatic Test Equipment (ATE). It includes the definition of hardware and software needed for analog and digital signal testing using a Test Unit Adapter common interface. This standard describes the overall ATE system concept as well as the definition of the specific elements of those systems.

Standard

USERS GUIDE FOR ARINC 616 AVIONICS SUBSET OF ATLAS

2017-11-29

CURRENT

ARINC605

This guide has been written as an applications manual for writing avionics test specifications that conform to ARINC Specification 616. It provides advice for converting ATLAS test specifications into ATLAS test programs and implementing them on Automatic Test Equipment (ATE).This guide has been written as an applications manual for writing avionics test specifications that conform to ARINC Specification 616. It provides advice for converting ATLAS test specifications into ATLAS test programs and implementing them on Automatic Test Equipment (ATE).

Standard

GUIDANCE FOR DESIGN AND USE OF BUILT-IN TEST EQUIPMENT

1988-10-31

CURRENT

ARINC604-1

The primary purpose of BITE is to assist maintenance personnel in the proper maintenance of avionics systems in a cost-effective manner. A description of a Centralized Fault Display System (CFDS) is included in this standard. The CFDS accumulates fault data, presents this data to a maintenance operator, and assists troubleshooting by performing diagnostic tests and performing verification testing after installation of a replacement unit.

Standard

STANDARD ATLAS LANGUAGE FOR MODULAR TEST

1995-01-30

CURRENT

ARINC626-3

This standard defines an airline-recommended subset of the Abbreviated Test Language for All Systems (ATLAS)intended to be used in conjunction with test systems that are compliant with ARINC 608A. ATLAS is a standard abbreviated English language used in preparation and documentation of test procedures that can be implemented with automatic or semiautomatic test equipment.

Standard

GUIDANCE FOR ELECTROSTATIC SENSITIVE DEVICE UTILIZATION AND PROTECTION

1992-01-01

CURRENT

ARINC606-1

The primary goal of this standard is to describe the nature of Electrostatic Discharge (ESD) and its effects on digital avionics equipment. It provides information concerning methods to protect against ESD damage which could originate in many different ways.