Search Results

This SAE Standard provides performance and general design requirements and related test procedures for a combination tail and floodlamp for use on industrial wheeled equipment that may be operated on public roads.

This specification describes the general connectors, contacts, and backshells in their shape and characteristic for cabin systems for commercial aircrafts. ARINC 600, ARINC 404, and ARINC 801 connector specifications are published as independent standards.

This specification describes the general connectors, contacts, and backshells in their shape and characteristic for cabin systems for commercial aircrafts. ARINC 600, ARINC 404, and ARINC 801 connector specifications are published as independent standards.

The purpose of this document is to provide an overview of data networking standards recommended for use in commercial aircraft installations. These standards provide a means to adapt commercially defined networking standards to an aircraft environment. It refers to devices such as bridges, switches, routers and hubs and their use in an aircraft environment. This equipment, when installed in a network topology, can optimize data transfer and overall avionics performance.

The purpose of this document is to establish guidelines that should be observed during initial design, production, and maintenance of aircraft components, and to present short-term and long-term strategies to minimize the costs and impacts associated with decreasing availability of components.

The difficulty in locating crash sites has prompted international efforts for alternatives to quickly recover flight data. This document describes the technical requirements and architectural options for the Timely Recovery of Flight Data (TRFD) in commercial aircraft. ICAO and individual Civil Aviation Authorities (CAAs) levy these requirements. The ICAO Standards and Recommended Practices (SARPs) and CAA regulations cover both aircraft-level and on-ground systems. This report also documents additional system-level requirements derived from the evaluation of ICAO, CAA, and relevant industry documents and potential TRFD system architectures. It describes two TRFD architectures in the context of a common architectural framework and identifies requirements. This report also discusses implementation recommendations from an airplane-level perspective.

ARINC 800 is the first industry standard intended for characterization of aviation-grade high-speed (Gbps) Ethernet links. The test methods are based on realistic representation of cabin networks. The notional cabling architecture is based on IFE seat distribution using multiple intermediate disconnects. Sequential testing is supported by building up number of connectors in the link. Test guidelines for mixed intermediate cable lengths are provided.

This document establishes techniques for validating that a mission store complies with the interface requirements contained in MIL-STD-1760 Revision D.

SAE J#### establishes the protocol and process limits for hydrogen fueling of light duty vehicles when the fuel delivery temperature is not pre-cooled, so called “ambient fueling” designated by Table 1 of SAE J2601-2014. These process limits (including the fuel delivery temperature, the maximum fuel flow rate, the rate of pressure increase and the ending pressure) are affected by factors such as ambient temperature, fuel delivery temperature and initial pressure in the vehicle’s compressed hydrogen storage system. SAE J#### establishes standard fueling protocols based on a series of design cases representing fueling system engineering categories. These categories are intended to provide performance targets which allow decreasing fueling times relative to the most simple design case. Similar to the table and formula based approaches of SAE J2601-2014, this approach establishes a minimum performance criteria leaving open options for innovation to decrease fueling times.

pilots, air traffic controllers, dispatchers, aviation meteorologists

This activity is focused on more electric and all electric type power systems for air vehicles. The scope of which includes source, distribution and user contributions to electrical power quality, failure modes, coordination, system reliabilty and robustness, impacts of being flight critical and the gaps which exist in present standards and guidance documents.

This AIR addresses the use of Software tools to supplement or automate human activities in the development of systems, but not the hardware or software items within those systems. If a systems development tool is also used in the scope of hardware or software item development, for that usage it would then become subject to the guidance presented in DO-254 and DO-178B/C, respectively.

AS 6413 and slash sheets /1 & /2 hold the main information for testing of battery packaging. This document holds further information and expansion of philosophy, clarification etc. surrounding the testing and industry needs.

This AIR will provide a basic understanding of STPA and how it can be applied to development and safety assessment of civil aircraft. It will explain, by way of an example, the information needed to begin STPA, the expected STPA outputs, and the phases of aircraft development and safety assessment that can be supported by STPA.

Clarify the role of the human considerations in Functional Hazard Assessments by identifying the sufficient input information regarding those considerations from the development process, how failure conditions may use that information, and what information the safety assessment process provides to other processes, particularly Human Factors, to assure those aspects of failure conditions are valid.

This information report is useful for personnel involved in the design, manufacturing, and/or use of digital fiber optic transmitters, receivers, and transceivers for aerospace applications

This AIR would examine the applicability of ARP 4754 and ARP 4761 to UAS and would identify the shortcomings in both recommended practices with regards to the specific technical aspects needed for UAS development.

A single depository for fiber optic and applied photonic definitions.

To detail the different epoxy types available for different aerospace applications which require different temperature ranges. Explain incoming/final inspection requirements and storage requirements. Examine the epoxy chemical make up with explanations of purpose in performance.