Search Results

Standard

ALUMINUM BRONZE RODS, BARS, AND FORGINGS 90.5Cu - 7.5Al - 1.9Si

1978-01-15

HISTORICAL

AMS4631D

This specification covers one type of aluminum bronze in the form of rods, bars, forgings, and forging stock.

Standard

Test Methods for Electrical Connectors

1998-01-01

HISTORICAL

AS13441

This standard establishes uniform test methods for testing electrical connectors.

Standard

INDUSTRIAL AND MARINE GAS TURBINE ENGINE STARTING SYSTEMS

1997-03-01

HISTORICAL

AIR4391

This SAE Aerospace Information Report (AIR) presents descriptions of several types of industrial and marine gas turbine engine starting systems.

Standard

Industrial and Marine Gas Turbine Engine Starting Systems

1999-11-01

CURRENT

AIR4391A

This SAE Aerospace Information Report (AIR) presents descriptions of several types of industrial and marine gas turbine engine starting systems.

Standard

Hydrogen Embrittlement Effect on Metals By Aircraft Maintenance Chemicals, Mechanical Test Methods

1977-07-01

CURRENT

ARP1525

The Test Procedure of ARP 1525 is Embodied in ASTM F519, Hydrogen Embrittlement Testing of Aerospace Materials. The requirements of the latest issue of ASTM F519 shall be fulfilled whenever reference is made to ARP1525.)

Standard

Mechanical Splice for Aerospace Fiber Optic Cables

2018-09-07

CURRENT

AS5405

This document defines performance standards which mechanical fiber optic cable splices must meet to be accepted for use in aerospace platforms and environments.

Standard

Ramp De-Icing

2000-03-01

HISTORICAL

AIR1335A

The specific purpose of this AIR is to provide general background information to better acquaint those who are involved with ramp de-icing of aircraft. Because the wide variance of atmospheric conditions at different airports, as well as at any individual airport, the figures given are of a general nature only and are to be taken as a very rough guide to the various factors concerned with ramp de-icing.

Standard

RAMP DE-ICING

1992-12-01

HISTORICAL

AIR1335

Standard

Fusion Splice for Aerospace Fiber Optic Cables

2018-09-07

HISTORICAL

AS6506

This document defines performance standards which fiber optic cable splices must meet to be accepted for use in aerospace platforms and environments.

Standard

Fusion Splice for Aerospace Fiber Optic Cables

2019-07-11

CURRENT

AS6506A

This document defines performance standards which fiber optic cable splices must meet to be accepted for use in aerospace platforms and environments.

Standard

Groove Design - Metal Face Seal

2013-10-28

HISTORICAL

AIR1108

Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.

Standard

Groove Design - Metal Face Seal

2019-06-06

CURRENT

AIR1108A

Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3, which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the purchaser or the manufacturer for use with this AIR. They are also applicable for use with metal o-rings (e.g., MS9142, MS202 thru MS9205) where interchangeability with machined or formed metal seals is desired. For metal o-ring groove designs where inter-changeability is not a requirement refer to ARP 674.

Standard

CLOTH, TYPE "E"-GLASS, STYLE 7781 FABRIC Solution-Addition-Type PMR-15 Polyimide Resin Impregnated

1982-04-01

HISTORICAL

AMS3829

This specification covers one type of glass cloth impregnated with a heat-reactive, thermosetting, solution-addition-type PMR-15 polyimide resin system, supplied in the form of continuous rolls of full width cloth or slit tape.

Standard

Cloth, Type “E”-Glass, Style 7781 Fabric Solution-Addition-Type PMR-15 Polyimide Resin Impregnated

1998-09-01

HISTORICAL

AMS3829B

This specification covers one type of glass cloth impregnated with a heat-reactive, thermosetting, solution-addition-type PMR-15 polyimide resin system, supplied in the form of continuous rolls of full width cloth or slit tape.

Standard

CLOTH, TYPE "E"-GLASS, STYLE 7781 FABRIC Solution-Addition-Type PMR-15 Polyimide Resin Impregnated

1988-01-01

HISTORICAL

AMS3829A

This specification covers one type of glass cloth impregnated with a heat-reactive, thermosetting, solution-addition-type PMR-15 polyimide resin system, supplied in the form of continuous rolls of full width cloth or slit tape.

Standard

Cloth, Type “E”-Glass, Style 7781 Fabric Solution-Addition-Type PMR-15 Polyimide Resin Impregnated

2016-11-10

CURRENT

AMS3829C

This specification covers one type of glass cloth impregnated with a heat-reactive, thermosetting, solution-addition-type PMR-15 polyimide resin system, supplied in the form of continuous rolls of full width cloth or slit tape.

Standard

Test Method to Obtain Lug-Up Torque Data for Heavy-Duty Truck and Bus Engines

2001-04-25

CURRENT

J2548_200104

This SAE Recommended Practice applies to all forms of diesel and natural gas engines fueled by the combination of diesel fuel and natural gas.

Standard

Fuel Dispensing Filter Test Methods

2020-05-26

CURRENT

J2793_202005

This SAE Recommended Practice is applicable to gasoline and diesel fuel filters installed on fuel dispensing equipment, mobile or stationary. It describes a set of tests used to characterize the structural integrity, filtration performance, and reaction to water contaminant with fuel dispensing filters.

Standard

Fuel Dispensing Filter Test Methods

2011-02-04

HISTORICAL

J2793_201102

This SAE Recommended Practice is applicable to gasoline and diesel fuel filters installed on fuel dispensing equipment, mobile or stationary. It describes a set of tests used to characterize the structural integrity, filtration performance, and reaction to water contaminant with fuel dispensing filters.

Standard

Small Diameter Fuel Line Permeation Test Procedure

2013-01-14

CURRENT

J2996_201301

This SAE Recommended Practice is intended for the determination of the losses of hydrocarbon fluids by permeation through small diameter fuel hose typically 4.75mm ID or less and typically used on Small Off-Road Engines (SORE) less than 19 kW as regulated under 40 CFR Part 1054.