Search Results

Abstract A key problem of the construction of fully electric aircraft is the limited energy density of battery packs. It is generally accepted that this can only be overcome via new, denser battery chemistry together with a further increase in the efficiency of power utilization. One appealing approach for achieving the latter is using laser-assisted filler-based joining technologies, which offers unprecedented flexibility for achieving battery cell connections with the least possible electrical loss. This contribution presents our results on the effect of various experimental and process parameters on the electrical and mechanical properties of the laser-formed bond.

Abstract Improving the energy performance of batteries can increase the reliability of electric aircraft. To achieve this goal, battery management systems (BMS) are required to keep the temperature within the battery pack and cells below the safety limits and make the temperature distribution as even as possible. Batteries have a limited service life as a result of unwanted chemical reactions, physical changes that cause the loss of active materials in the structure, and internal resistance increase during the charging and discharging cycle of the battery. These changes usually affect the electrical performance of batteries. Battery life can be increased only by reducing or preventing unwanted chemical reactions. Lithium-ion (Li-ion) batteries are a suitable option due to their high specific energy and energy density advantages. In this study, the necessity of heat management is emphasized. The discharge tests of the Li-ion battery provided 94.6 Wh under 10C and 90.9 Wh under 1C.

Abstract The range of an aircraft is determined by the amount of energy that its batteries can store. Today, larger batteries are used to increase the range of electric vehicles, although energy efficiency decreases as the weight of the vehicles increases. Among the elements, lithium (Li) is the lightest and has the highest electrochemical potential. Therefore, the use of Li-ion batteries is recommended for hybrid aircraft. In addition, Li-ion batteries are the most common type of battery that is used in portable electronic devices such as smartphones, tablets, and laptops. However, Li-ion batteries may explode due to temperature. Therefore, the thermal analysis of Li-ion batteries was investigated both experimentally and numerically. Li-ion batteries were connected in series (the number is 9). Noboru’s theory of heat generation was discussed in the estimation of energy data.

Abstract The supersession of metallic alloys with lightweight, high-strength composites is popular in the aircraft industry. However, aviation electronic enclosures for large format batteries and high power conversion electronics are still primarily made of aluminum alloys. These aluminum enclosures have attractive properties regrading structural integrity for the heavy internal parts, electromagnetic interference (EMI) suppression, electrical bonding for the internal cells, and/or electronics and failure containment. This paper details a lightweight carbon fiber composite chassis developed at Meggitt Sensing Systems (MSS) Securaplane, with a copper metallic mesh co-cured onto the internal surfaces resulting in a 50% reduction in weight when compared to its aluminum counterpart. In addition to significant weight reduction, it provides equal or improved performance with respect to EMI, structural and flammability performance.

Abstract Possible oil contamination of aircraft bleed air is an ongoing operational issue for commercial aircraft. A sensitive and reliable method to detect contamination, especially at very low levels, has been elusive due, in part, to the lack of information about the physical nature of oil that results when entrained in the bleed air by an engine compressor. While it was expected that high shear rates in the compressors would result in very finely dispersed particles, detailed data on the size characteristics of these droplets were not available, making it difficult to develop reliable detection techniques. The goal of the reported research was to collect experimental data to provide this information. The concentration and size distribution of particles were measured for bleed air with different rates of controlled oil contamination under various engine operating conditions.

According to the International Civil Aviation Organization, the world aviation air traffic has grown by an average yearly rate of 5% over the last thirty years, until the devastating downturn brought on by the COVID crisis of 2020. Regardless of the current situation, there are still a number of issues and challenges that the industry is confronted with, not the least of which are related to sustainability, the conversion to electrical usage, the challenge of increasing propulsion efficiency in conventional propulsion, the digital transformation of the entire ecosystem, etc. In response, system developers and researchers in the field are working on a number of key technologies and methodologies to solve some of these issues. The Sustainable Aviation Research Society (SARES), a global organization that seeks to encourage research in this area and helps disseminate knowledge via conferences and symposia, has been organizing meetings to promote sustainable aviation over the five years.

Abstract The airline industry faces a crisis in the future as consumer demand is increasing, but the environmental effects and depleting resources of kerosene mean that growth is unsustainable. Hydrogen is touted as the leading candidate to replace kerosene, but it needs significant technological and economical endeavors. In such a scenario, cryogenic liquid hydrogen (LH2) is predicted to be the most feasible method of using hydrogen. The major challenge of LH2 as an aircraft fuel is that it requires approximately four times the storage volume of kerosene—due to its lower density. Thus the design of cryogenic storage tanks to handle larger quantities of fuel is becoming increasingly important. But the increase in drag associated with larger storage tanks causes an increase in fuel consumption. Hence, this paper aims to evaluate the aerodynamic performance of different storage configurations and aid in the selection of an economic and efficient storage system.

Abstract We demonstrate a virtual proof-of-concept design and experiment for harvesting energy enabling economic and environment-friendly aircraft by recycling forces for power conversion. The harvesting uses piezoelectric materials for extracting energy from the impact at the touchdown during the landing of an aircraft and direct current (DC) generators powered by the rotational motion of the aircraft wheels during taxiing. The design begins with a multidomain model comprising multibody dynamics, mathematical descriptions, abstract behavioral blocks, and programmed code. Piezoelectric harvesting explores six types of materials consisting of ring and disk pad geometries. Both geometries are typical configurations in suspension systems. Recent advances have shown the potential of getting higher voltage out of new materials properties. Our objective is to determine the useful impact force during a touchdown on the pads and a pad type that maximizes the power transfer.

Abstract To ensure the ongoing safety of aircraft, it is necessary to conduct risk assessment for those events that occurred during routine operations. Consequently, the corresponding corrective actions should be accomplished within the compliance time if the event was ascertained to be unsafe. However, the existing models of risk assessment and determination of the correction time limit have not dealt with the time-varying failure rate of components. Based on the Gunstone method, this article considers the event risks of the fleet at different correction time limits, combined with the Monte Carlo method to establish a model of risk assessment and determination of the correction time limit. Based on the event risk level and the risk per flight hour, the risks of the event under the condition of no corrective actions and corrective actions with different time limits were assessed, respectively.

Abstract This research was initiated with the goal of developing a significantly stronger aircraft transparency design that would reduce transparency failures from bird strikes. The objective of this research is to demonstrate the fact that incorporating high-strength tempered glass into cockpit window constructions for commercial aircraft can produce enhanced safety protection from bird strikes and weight savings. Thermal glass tempering technology was developed that advances the state of the art for high-strength tempered glass, producing 28 to 36% higher tempered strength. As part of this research, glass probability of failure prediction methodology was introduced for determining the performance of transparencies from simulated bird impact loading. Data used in the failure calculation include the total performance strength of highly tempered glass derived from the basic strength of the glass, the temper level, the time duration of the load, and the area under load.