Search Results

Standard

AIRSTREAM DEVIATION INSTRUMENT (ADI)

1991-05-01

HISTORICAL

ARP794

This recommended practice covers an instrument which measures and displays angle of deviation of the airstream dependent on mounting location on the aircraft.

Standard

Airstream Deviation Instrument (ADI)

2008-02-16

CURRENT

ARP794A

This recommended practice covers an instrument which measures and displays angle of deviation of the airstream dependent on mounting location on the aircraft.

Standard

TOTAL TEMPERATURE MEASURING INSTRUMENTS (TURBINE POWERED SUBSONIC AIRCRAFT)

1991-05-01

HISTORICAL

AS793

This standard covers three basic types of total-temperature-measuring instruments used as a means of determining the total temperature developed by adiabatic heating of the air due to motion of the aircraft through the air.

Standard

Temperature Measurement, Well Insert Type

2020-04-14

CURRENT

ARP175A

Standard

TEMPERATURE MEASUREMENT, WELL INSERT TYPE

2008-02-16

HISTORICAL

ARP175

Standard

DIRECTIONAL INDICATING SYSTEM (TURBINE POWERED SUBSONIC AIRCRAFT)

1991-05-01

HISTORICAL

ARP416

This recommended practice covers the requirements for gyroscopically stabilized Directional Indicating Systems, which will operate as a 1°/hour latitude corrected, free directional gyro or as a slaved gyro, magnetic compass with 1/2° accuracy.

Standard

Directional Indicating System (Turbine Powered Subsonic Aircraft)

2020-04-14

CURRENT

ARP416B

This recommended practice covers the requirements for gyroscopically stabilized Directional Indicating Systems, which will operate as a 1°/hour latitude corrected, free directional gyro or as a slaved gyro, magnetic compass with 1/2° accuracy.

Standard

Directional Indicating System (Turbine Powered Subsonic Aircraft)

2008-02-16

HISTORICAL

ARP416A

This recommended practice covers the requirements for gyroscopically stabilized Directional Indicating Systems, which will operate as a 1°/hour latitude corrected, free directional gyro or as a slaved gyro, magnetic compass with 1/2° accuracy.

Standard

Automatic Pilots (Turbine Powered Subsonic Aircraft)

2020-12-22

CURRENT

AS440B

This SAE Aerospace Standard (AS) covers automatic pilots intended for use on aircraft to automatically operate the primary and trim aerodynamic controls to maintain stable flight and/or to provide maneuvering about any of the three axes through servo control. Automatic control functions essential for primary or augmented flight control are excluded.

Standard

Minimum Performance Standard Stall Warning Equipment

2020-12-22

CURRENT

AS8014A

This Aerospace Standard covers two basic Stall Warning Systems, one measures air flow and pressure distribution on the airfoil and the other measures the angle of airflow with respect to an arbitrary reference line. Each type of system includes, as a minimum, a sensor and the means for activating a device which warns the pilot of an impending stall.

Standard

MINIMUM PERFORMANCE STANDARD STALL WARNING EQUIPMENT

1986-09-08

HISTORICAL

AS8014

This Aerospace Standard covers two basic Stall Warning Systems, one measures air flow and pressure distribution on the airfoil and the other measures the angle of airflow with respect to an arbitrary reference line. Each type of system includes, as a minimum, a sensor and the means for activating a device which warns the pilot of an impending stall.

Standard

Single-Degree-of-Freedom Spring-Restrained Rate Gyros

2008-02-16

CURRENT

AS1104

This specification covers that gyroscopic instrument normally defined as a "subminiature rate gyro." The rate gyro, when subjected to an angular rate about its input axis, provides an AC output voltage proportional to the angular rate. The subminiature size category generally includes gyro instruments of one (1) inch diameter or less and three and one-half (3 1/2) inches length or less. This specification defines the requirements for a subminiature spring-restrained, single-degree-of-freedom rate gyro for aircraft, missile, and spacecraft applications.

Standard

Minimum Performance Standard for Direction Instrument, Non-Magnetic (Gyroscopically Stabilized)

2008-02-16

CURRENT

AS8021

This document establishes the minimum requirements for design and qualification of equipment identified as Gyroscopically Stabilized Non-Magnetic Direction Instruments.

Standard

Minimum Performance Standard for Automatic Pressure Altitude Digitizer Equipment

2008-02-16

CURRENT

AS855

All automatic altitude reporting digitizer equipment manufactured under this standard shall comply with the requirements as specified up to its maximum range as indicated on the equipment nameplate.

Standard

Barometry for Altimeter Calibration

2020-02-20

CURRENT

AIR1075B

This SAE Aerospace Information Report (AIR) is concerned only with aspects directly relating to available accuracy. While well-designed photoelectric, inductive or capacitive readers and pressure regulators, and other accessories are highly desirable for convenience and production rate, they are considered to be outside the scope of this AIR.

Standard

AIRCRAFT INSTRUMENT AND INSTRUMENT SYSTEM STANDARDS: WORDING TERMINOLOGY, PHRASEOLOGY, ENVIRONMENT AND DESIGN STANDARDS FOR

1981-01-15

HISTORICAL

AIR818C

This AS covers __________ which measure and display __________ or This AS covers __________ basic types of (no capitals) instruments as follows: Note: Each type number to be followed by a brief description as it would if the scope were covering only a single type. As many types as required may be used.

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2008-02-16

HISTORICAL

AIR818D

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2020-02-20

CURRENT

AIR818E

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

AIRCRAFT INSTRUMENT STANDARDS: WORDING, TERMINOLOGY, PHRASEOLOGY AND ENVIRONMENTAL AND DESIGN REQUIREMENTS FOR

1991-05-01

HISTORICAL

AIR818

This Aerospace Standard covers ______________________________________________.

Standard

SUBSONIC AIRCRAFT INSTRUMENT STANDARDS: WORDING, TERMINOLOGY, PHRASEOLOGY, ENVIRONMENT AND DESIGN STANDARDS FOR

1966-08-01

HISTORICAL

AIR818A

This standard covers _________________________________________