Search Results

A major trend in modern aerospace and automotive systems is to integrate computing, communication and control into different levels of the vehicle and/or its supervision. A well fitted architecture adopted by this trend is the Common Bus Network Architecture. A Networked Control System (NCS) is called when the control loop is closed through a communication network. The presence of this communication network introduces new characteristics (sharing bus, delays, jitter etc.) to be considered at design time of a control system. This work focuses on the influences of data bus protocols on an aircraft Fly-By-Wire (FBW) networked control system. We intent to show, through simulations, the influences of sharing bus on a real time control system. To compare effects, we choose the CAN Bus protocol where the medium access control is event driven; and the TTP protocol where the medium access control is time driven.

In this work we discuss some types of simulation architectures and standards, their characteristics and applications to the simulation and control of aerospace vehicles. This includes: the basic definitions, types and characteristics of simulators and simulations (physical, computational, hybrid, etc.; discrete events, discrete time, continuous time, etc; deterministic, stochastic, etc.) their basic compromise (simplicity x fidelity), their man-machine interfaces and interactions (virtual, constructive, live, etc.), their evolution law (time, events, mixed, etc.), their architectures (“stand-alone”, PIL, HIL, MIL, DIS, HLA, etc.), their standards (OMBA, SIMNET, ALSP, DIS, HLA 1.3, HLA 1516, ASIA, AP2633, etc.) and their applications to the simulation and control of aerospace vehicles. This is illustrated by some examples driven from the aerospace industry

This work presents the distributed simulation of the longitudinal mode of an aircraft by using the DoD High Level Architecture (HLA). The HLA is a general-purpose architecture for simulation reuse and interoperability. This architecture was developed under the leadership of the Defense Modeling and Simulation Office (DMSO) to support reuse and interoperability across the large numbers of different types of simulations developed and maintained by the DoD. To do this, the transfer function of the longitudinal mode of a hypothetical aircraft was implemented by means of a SystemBuild/MATRIXx model. The output of this model was connected to a Run-Time Infrastructure (RTI) and monitored on a remote computer. The connection between the model and the RTI was implemented by using a wrapper which was developed in C++. The HLA RTI implementation used in this work was the poRTIco.

Computer systems aboard aerospace vehicles have become more and more distributed in an attempt to solve “real-life” problems such as commonality and longevity of components and subsystems. On the other hand, distributed systems pose a much bigger challenge in system design than traditional, “monolithic” systems, whereby functions are performed by a single component combining hardware and software. “Determinism” (predictability in the occurrence of events), “causality” (temporal ordination of occurrence of events) and “synchronism” (simultaneousness in the occurrence of events) can be pointed out as major challenges in system design. This paper shall survey methods of analyzing determinism in network communications in distributed computer systems aboard aerospace vehicles in different network topologies using a representative model.

This paper aims at discussing the use of dissimilar hardware architecture to mitigate DESIGN ERRORS in a flight control system application, as one of the possible design techniques that, combined with the usage of development processes, will satisfy the safety objectives for airborne systems. To accomplish its purpose, the paper starts by understanding the origins of DESIGN ERRORS in micro-coded devices and the concerns of airworthiness certification authorities (or simply certification authorities from now on). After that, an overview of the aeronautical industry efforts in terms of development processes and certification requirements to mitigate DESIGN ERRORS will be presented. At this point, the dissimilar architecture is proposed as an effective mean to mitigate the problem of DESIGN ERRORS. Finally, a Flight Control System application using dissimilar architecture is proposed as a case study.

On several engineering applications high Reliability is one of the most wanted features. The aspects of Reliability play a key role in design projects of aircraft, spacecraft, automotive, medical, bank systems, and so, avoiding loss of life, property, or costly recalls. The highly reliable systems are designed to work continuously, even upon external threats and internal Failures. Very convenient is the fact that the term 'Failure' may have its meaning tailored to the context of interesting, as its general definition refers to it as "any deviation from the specified behavior of a system". The above-mentioned 'deviation' may refer to: performance degradation, operational misbehavior, deviation of environmental qualification levels, Safety hazards, etc. Nevertheless, Reliability is not the only requirement for a modern system. Other features as Availability, Integrity, Security and Safety are always part of the same technical specification, in a same level of importance.

This work presents the analysis, design and simulation of the reconfigurable control architecture for the contingency mode of the MultiMission Platform (MMP). The MMP is a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation and other Sub-Modes, according to ground command or information coming from the control system, mainly alarms. The implementation followed the specifications when they were found, otherwise it was designed. They cover operations from detumbling after launcher separation and solar acquisition, to achieving payload nominal attitude and orbital corrections maneuvers. The manager block of the control system was implemented as a finite state machine. The tests are based in simulations with the MatriX/SystemBuild software. They focused mainly on the worst cases that the satellite is supposed to endure in its mission, be it during modes or transitions between modes and submodes.

In this work we discuss some types of simulators and simulations, their characteristics and applications to the simulation and control of aerospace vehicles. This includes: the basic definitions, types and characteristics of simulators and simulations (physical, computational, hybrid, etc.; discrete events, discrete time, continuous time, etc; deterministic, stochastic, etc.) their basic compromise (simplicity × fidelity), their man-machine interfaces and interactions (virtual, constructive, live, etc.), their evolution law (time, events, mixed, etc.), their architectures (“standalone”, PIL, HIL, MIL, DIS, HLA, etc.), their environments (discrete, continuous, hybrid, etc.) and their applications to the simulation and control of aerospace vehicles. This is illustrated by some examples driven from the aerospace industry

This paper presents some techniques for fault diagnosis in aerospace and automotive systems. A diagnosis technique is an algorithm to detect and isolate fault components in a dynamic process, such as sensor biases, actuator malfunctions, leaks and equipment deterioration. Fault diagnosis is the first step to achieve fault tolerance, but the redundancy has to be included in the system. This redundancy can be either by hardware or software. In situations in which it is not possible to use hardware redundancy only the analytical redundancy approach can be used to design fault diagnosis systems. Methods based on analytical redundancy need no extra hardware, since they are based on mathematical models of the system.

Cyber-physical systems are joint instances of growing complexity and high integration of elements in the information and physical domains reaching high levels of difficulty to engineer an operate them. This happens with satellites, aircraft, automobiles, smart grids and others. Current technologies as computation, communication and control integrate those domains to communicate, synchronize and operate together. However, the integration of different domains brings new challenges and adds new issues, mainly in real time distributed control systems, beginning with time synchronization. In this paper, we present a discussion on time synchronization and their effects in distributed cyber-physical control systems. To do that, we review the literature, discuss some time synchronization techniques used in cyber-physical systems, and illustrate them via model and simulation of a system representative of the aerospace area.

Switching controls are those that can switch between control or plant modes to perform their functions. They have the advantage of being simpler to design than an equivalent control system with a single mode. However, the transients between those modes can introduce steps or overshootings in the state variables, and this can degrade the performance or even damage the control or the plant. So, the smoothing of such transients is vital for their reliability and mantainability. This is can be of extreme importance in the aerospace and automotive fields, plenty of switchings between manual and autopilot modes via relays, or among gears via clutches, for example. In this work, we present a first strategy for smoothing transients in switching controls of aerospace and automotive systems.

The Multimission Platform (MMP) is a generic service module currently in Project at INPE. In the 2001 version, its control system can be switched between nine main Operation Modes and other submodes, according to information from satellite sensors and ground commands. The Nominal Mode stabilizes the MMP in three axes and takes it to a nominal attitude, using three reaction wheels. Each wheel has coarse and fine acquisition submodes. The use of multiple modes of control for specific situations frequently is simpler than projecting a single controller for all cases. However, besides being harder to warrant its general stability, the mere switching between these submodes generates bumps, which can reduce the performance and even damage the actuator or plant. In this work, we present an application of diverse methods to smooth the transition between control submodes of the Nominal Mode of the MMP.

In this work we discuss current trends driving the aerospace and automotive systems architectures. This includes trends as: 1) pos-globalization and regionalization; 2) the formation of knowledge oligopolies; 3) commonality, standardization and even synergy (of components, tools, development process, certification agents, standards); 4) reuse and scalability; 5) synergy of knowledge and tools convergence; 6) time, cost and quality pressures and innovation speed; 7) environmental and safety issues; and 8) abundance of new technologies versus scarcity of skilled manpower to apply them.

The increasing use of Global Navigation Satellite Systems-GNSS in future Aeronautical Navigation Systems-ANS is a current trend in the aeronautical operation and regulation communities. This trend implies the adoption of elements and interactions of a degree of complexity that is still being discussed around the world. Faced with that, we believe that a requirements based approach is an effective tool to deal with such highly complex and integrated systems. In this work we discuss a requirements based approach to future Aeronautical Navigation Systems based on Global Navigation Satellite Systems. To do that, we first briefly present the concept of Communication, Navigation, Surveillance/Air Traffic Management - CNS/ATM, and the current and potential benefits of the adoption of its paradigms.

Many control systems switch between control modes according to necessity. That is often simpler than designing a full control to all situations. However, this creates new problems, as determining the composed system stability and the transient during switching. The latter, while temporary, may introduce overshooting that degrade performance and damage the plant. This is particularly true for the MultiMission Platform (MMP), a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation and other submodes, according to ground command or information coming from the control system, mainly alarms. It can acquire one and three axis stabilization in generic attitudes, with actuators including magnetotorquers, thrusters and reaction wheels.

Current systems such as satellites, aircrafts, automobiles, turbines, wind power generators and traffic controls are becoming increasingly complex and/or highly integrated as prescribed by the SAE-ARP-4754 Standard. Such systems frequently require accurate generation, distribution and time or phase synchronization of signals with different frequencies that may be based on one reference signal and frequency. But the environment fluctuations or the non-linear dynamics of these operations cause uncertainties (skew and jitter) in the phase or time of the reference signal and its derived signals. So, techniques to reduce those causes or their effects are becoming important aspects to consider in the design of such systems. The PLL techniques are useful for establishing coherent phase or time references, jitter reduction, skew suppression, frequency synthesis, and clock recovery in numerous systems such as communication, wireless systems, digital circuits, rotors, and others.

In this work, the problem of fault detection, isolation, and reconfiguration (FDIR) for Networked-Control Systems (NCS) of aerospace vehicles is discussed. The concept of fault-tolerance is introduced from a generic structure, and a review on quantitative and qualitative methods (state estimation, parameter estimation, parity space, statistic testing, neural networks, etc.) for FDIR is then performed. Afterwards, the use of networks as loop-closing elements is introduced, followed by a discussion on advantages (flexibility, energy demand, etc.) and challenges (networks effects on performance, closed-loop fault-effects on safety, etc.) represented thereby. Finally, examples of applications on aerospace vehicles illustrate the importance of the discussion herein exposed.

Systems such as satellites, airplanes, cars and air traffic controls are becoming more complex and/or highly integrated. These systems integrate several technologies inside themselves, and must be able to work in very demanding environments, sometimes with few or none maintenance services due to their severe conditions of work. To survive such severe work conditions, the systems must present high levels of reliability, which are achieved through different approaches, processes, etc. These unfold in many: levels of aggregation (systems, subsystems, equipments, components, etc.), phases of their lifecycles (conception, design, manufacturing, assembly, integration, tests, operation, etc.), environments (land, sea, air, space, etc.), types of components/applications/experiences/technological communities (nuclear, aerospace, military, automotive, medical, commercial, etc.), leaded by the widespread use of semiconductors.

Current systems such as satellites, aircrafts, automobiles, turbines, power controls and traffic controls are becoming increasingly complex and/or highly integrated as prescribed by the SAE-ARP-4754a Standard. Such systems operate in a real time distributed environment which frequently requires a common knowledge of time among different devices, levels and granularities. So, temporal correctness is mostly needed, besides logical correctness. It can be achieved by hardware clocks and devices, software clocks and algorithms, or both, to avoid or tolerate, within appropriate margins, the time faults or failures that may occur in aerospace and automotive systems. This paper presents an overview of clock synchronization algorithms and their uses in aerospace and automotive systems. It is based on a review of the literature, discussion and comparison of some clock synchronization algorithms with different policies.

The aerospace and automotive electronic systems are getting more complex and/or highly integrated, as defined by ARP 4754A, making extensive use of microelectronics and digital memories which, in turn, operates in higher frequencies and lower voltages. In addition, the aircraft are flying in higher altitudes, and polar routes are getting more frequent. These factors raise the probability of occurrence of hazardous effects like the Single Event Upsets in their embedded electronic systems. These must be designed in a way to tolerate and assure the immunity to the Single Event Upsets, based upon criteria such as reliability, availability and criticality. This paper proposes an overview of an assurance process of immunity of embedded electronic systems to Single Event Upsets caused by ionizing particles by means of a review of literature and an analysis of standards as ECSS-E-ST-10-1, NASA Single Event Effects Criticality Analysis and IEC TS 62396-1.