Search Results

Standard

CLASSIFICATION AND NOMENCLATURE TOWING WINCH FOR SKIDDERS AND CRAWLER TRACTORS

1995-06-01

HISTORICAL

J1014_199506

This SAE Standard includes only those towing winches commonly used on skidders and crawler tractors. These winches are used on self-propelled machines described in SAE J1057, J1116, and J1209. Specifically excluded are those winches used for hoisting operations.

Standard

OPERATOR PROTECTIVE STRUCTURE PERFORMANCE CRITERIA FOR CERTAIN FORESTRY EQUIPMENT

1975-11-01

HISTORICAL

J1084_197511

This Recommended Practice establishes the test procedures and minimum performance criteria necessary to fulfill the intended purpose and is applicable to Skidders, Grapple Skidders and Crawlers when used in the harvesting of trees.

Standard

OPERATOR PROTECTIVE STRUCTURE PERFORMANCE CRITERIA FOR CERTAIN FORESTRY EQUIPMENT

1980-04-01

HISTORICAL

J1084_198004

This recommended practice establishes the test procedures and minimum performance criteria necessary to fulfill the intended purpose and is applicable to Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees.

Standard

SPECIFICATION DEFINITIONS—FELLER/BUNCHER

1995-09-01

HISTORICAL

J1255_199509

This SAE Standard includes the definitions of specification terms most commonly used to describe both wheeled and track type feller bunchers.

Standard

Specification Definitions--Feller/Buncher

2003-07-17

CURRENT

J1255_200307

This SAE Standard includes the definitions of specification terms most commonly used to describe both wheeled and crawler type feller bunchers. The purpose of this document is to provide a uniform method of defining specification terms for feller/bunchers.

Standard

IDENTIFICATION TERMINOLOGY OF MOBILE FORESTRY MACHINES

1994-08-01

HISTORICAL

J1209_199408

This SAE Standard describes a procedure and the terminology for identifying and classifying mobile forestry machines which may be portable or self-propelled. Identification is determined by endpoint usage as intended by the manufacturer's design objectives. This document applies to machines that are designed for use in site preparation, planting, transporting, and processing wood and wood fiber. Specifically excluded are machines used exclusively in sawmills or wood yards, on-highway transport vehicles, and aerial vehicles.

Standard

FIRE PREVENTION ON FORESTRY EQUIPMENT

1978-04-01

HISTORICAL

J1212_197804

Mobile forestry machines is intended to include those off-road machines which are designed especially for, or adapted to be used in, the planting, site preparation, harvesting, processing, and transporting of trees. The diversity of machines and systems falling within this scope prohibits detailed specifications, and therefore recommendations are of a general nature.

Standard

Fire Prevention on Forestry Machinery

2020-10-06

CURRENT

J1212_202010

This document applies to off-road forestry work machines defined in SAE J1116 or ISO 6814.

Standard

IDENTIFICATION TERMINOLOGY AND COMPONENT NOMENCLATURE KNUCKLE BOOM LOG LOADER

1996-06-01

HISTORICAL

J2055_199606

This SAE Recommended Practice includes the types of mounting configurations and the names of major components and parts peculiar to this type of machine. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document.

Standard

Swing Performance And Rating Procedure, Material Handlers, Knuckle Boom Log Loaders And Certain Forestry Equipment

1998-06-01

HISTORICAL

J2393_199806

This SAE Standard describes a uniform method to calculate and specify swing performance characteristics of material handlers, knuckle boom log loaders, delimbers, feller bunchers, harvesters, processors, and other knuckle boom material handlers. It establishes definitions and specifies machine conditions for calculations and tests. This document applies to knuckle boom log loaders as defined in SAE J1209 and SAE J2055 and to certain forestry equipment defined in SAE J1209 and ISO 6814 that have rotating upper-structures such as feller bunchers, harvesters, processors, and forwarders. Included in the definition of knuckle boom log loaders are behind the cab and rear-mounted log loaders not having their own power supply.

Standard

Specification Definitions—Clam Bunk Skidder

1998-07-21

HISTORICAL

J1824_199807

This SAE Recommended Practice identifies and defines the specifications most commonly used to describe high-speed steel track and articulated rubber-tired clam bunk skidders. The illustrations used are not intended to be descriptive of any existing machine or dictate a combination needed for a particular logging situation. The dimensions indicated are basic and may be supplemented by the individual machine manufacturer.

Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

2004-03-18

HISTORICAL

J2417_200403

This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in SAE J1209 and SAE J2055 and certain forestry equipment defined in SAE J1209 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.

Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

1998-06-01

HISTORICAL

J2417_199806

This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in SAE J1209 and SAE J2055 and certain forestry equipment defined in SAE J1209 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.

Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

2009-08-31

HISTORICAL

J2417_200908

This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in SAE J1209 and SAE J2055 and certain forestry equipment defined in SAE J1209 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.

Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

2020-01-10

CURRENT

J2417_202001

This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in ISO 6814 and ISO 17591 and certain forestry equipment defined in ISO 6814 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.

Standard

Component Nomenclature—Feller Buncher

2002-12-19

HISTORICAL

J1254_200212

This SAE Standard includes names of major components and parts peculiar to this type of machine. Illustrations used here are not intended to include all existing commercial machines or be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document.

Standard

COMPONENT NOMENCLATURE—FELLER BUNCHER

1995-09-01

HISTORICAL

J1254_199509

This SAE Standard includes names of major components and parts peculiar to this type of machine. Illustrations used here are not intended to include all existing commercial machines or be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document.

Standard

Nomenclature—Clam Bunk Skidder

2002-12-19

HISTORICAL

J1353_200212

This SAE Recommended Practice identifies major components and parts peculiar to clam bunk skidders. Illustrations used here are not intended to include all existing machines or to be exactly descriptive of any particular machine. They have been provided to illustrate the principles to be used in applying this document.

Standard

NOMENCLATURE—CLAM BUNK SKIDDER

1995-04-01

HISTORICAL

J1353_199504

This SAE Recommended Practice identifies major components and parts peculiar to clam bunk skidders. Illustrations used here are not intended to include all existing machines or to be exactly descriptive of any particular machine. They have been provided to illustrate the principles to be used in applying this document.

Standard

Nomenclature - Clam Bunk Skidder

2023-12-07

CURRENT

J1353_202312

This SAE Recommended Practice identifies major components and parts peculiar to clam bunk skidders. Illustrations used here are not intended to include all existing machines or to be exactly descriptive of any particular machine. They have been provided to illustrate the principles to be used in applying this document.