Search Results

Standard

Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks

2020-04-29

J2891_202004

This SAE Recommended Practice covers the design and application of a 120 VAC single phase engine based auxiliary power unit or GENSET. This document is intended to provide design direction for the single phase nominal 120 VAC as it interfaces within the truck 12 VDC battery and electrical architecture providing power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off.

Standard

Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks

2010-07-06

J2891_201007

This SAE Recommended Practice covers the design and application of a 120 VAC single phase engine based auxiliary power unit or GENSET. This document is intended to provide design direction for the single phase nominal 120 VAC as it interfaces within the truck architecture providing power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off.

Standard

Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks

2015-12-18

J2891_201512

This SAE Recommended Practice covers the design and application of a 120 VAC single phase engine based auxiliary power unit or GENSET. This document is intended to provide design direction for the single phase nominal 120 VAC as it interfaces within the truck architecture providing power to truck sleeper cab hotel loads so that they may operate with the main propulsion engine turned off.

Standard

Heavy Vehicle Controls Prioritization and Conflict Resolution

2015-04-10

J3081_201504

This document is written to address acceleration and deceleration control issues related to Heavy Duty Trucks and Buses greater than 10 000 GVW.

Standard

TRUCK, TRUCK-TRACTOR, AND TRAILER AIR SERVICE BRAKE SYSTEM PNEUMATIC PRESSURE AND TIME LEVELS

1967-02-01

J982_196702

This SAE Recommended Practice establishes pneumatic design levels for new vehicles with 125 psi nominal pressure service air brake systems.

Standard

EXTERIOR SOUND LEVEL MEASUREMENT PROCEDURE FOR SELF-PROPELLED AGRICULTURAL FIELD EQUIPMENT

1978-05-01

J1008_197805

This SAE Recommended Practice sets forth the instrumentation and procedures to be used in measuring exterior sound levels of self-propelled agricultural field equipment of 15 kW (20 net engine hp) or greater. It is not intended to cover operation of safety devices (such as alarms), or equipment used primarily in stationary operation. The sound levels obtained by using this test procedure are repeatable and representative of the higher range of sound levels generated by the machine in normal road transport. The sound levels are not intended to represent the average or equivalent sound levels over a field use cycle.

Standard

SOUND MEASUREMENT—SELF-PROPELLED AGRICULTURAL EQUIPMENT—EXTERIOR

1987-01-01

J1008_198701

This SAE Recommended Practice sets forth the instrumentation and procedures to be used in measuring exterior sound levels of self-propelled agricultural field equipment of 15 kW (20 net engine hp) or greater. It is not intended to cover operation of safety devices (such as alarms), or equipment used primarily in stationary operation. The sound levels obtained by using this test procedure are repeatable and representative of the higher range of sound levels generated by the machine in normal road transport. The sound levels are not intended to represent the average or equivalent sound levels over a field use cycle.

Standard

TON-MILE PER HOUR TEST PROCEDURE

1974-03-01

J1015_197403

The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.

Standard

TON-MILE PER HOUR TEST PROCEDURE

1977-06-01

J1015_197706

The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.

Standard

TON-MILE PER HOUR TEST PROCEDURE

1983-12-01

J1015_198312

The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.

Standard

Recommendations for Children's Snowmobile

2015-11-24

J1038_201511

This SAE Recommended Practice establishes the test procedures, performance requirements, and criteria necessary to evaluate minimum safety and reliability requirements of a children's snowmobile as identified in 1.2.

Standard

Recommendations for Children's Snowmobile

2007-03-16

J1038_200703

This SAE Recommended Practice establishes the test procedures, performance requirements, and criteria necessary to evaluate minimum safety and reliability requirements of a children's snowmobile as identified in 1.2.

Standard

OPERATOR CONTROLS FOR GRADERS–SAE J1071

1977-06-01

J1071_197706

This recommended practice covers the relative position and direction of motion of controls which influence the movement of the machine and the operating direction only of equipment controls.

Standard

SOUND POWER LEVEL MEASUREMENTS - EARTHMOVING MACHINERY (DOZER, LOADER, EXCAVATOR, AND BACKHOE) - IN PLACE DYNAMIC - SOUND PRESSURE LEVEL OR SOUND INTENSITY METHOD

1987-04-01

J1805_198704

The requirements for setting up and operating the machinery, the microphone array and hemispherical measurement surface are given in this document. This document shall be used in conjunction with manufacturer's recommendations pending finalization of ANSI documents on the subject of sound intensity procedures. The accompanying sound intensity procedure clarification is provided pending more widespread understanding of sound intensity.

Standard

REPORTING CLEANLINESS LEVELS OF HYDRAULIC FLUIDS

1986-03-01

J1165_198603

This SAE Recommended Practice has been formulated to advance and endorse the use of the ISO (International Organization for Standardization) Solid Contaminant Code as the universal means for expressing the level of particulate contaminant in hydraulic fluid and for specifying acceptable limits of cleanliness. Worldwide approval was gained for this coding system because it provides a simple, unmistakable, meaningful, and consistent means of communication between suppliers and users. The code applies to all types of hydraulic (liquid) fluids used in fluid power and control systems as applied to self-propelled machines as referenced in J1116.

Standard

Hydraulic Excavator Operator Controls

2019-06-06

J1177_201906

This standard covers mobile hydraulic excavator controls and the specific arrangement and direction of motion for the primary controls. This standard applies to mobile hydraulic excavators as described in ISO 7135—Earthmoving machinery—Hydraulic excavators—Terminology and commercial specifications, and ISO 6165—Earthmoving machinery—Basic types—Vocabulary.

Standard

MINIMUM REQUIREMENTS FOR WHEEL SLIP BRAKE CONTROL SYSTEM MALFUNCTION SIGNALS

1979-10-01

J1230_197910

It is recognized that a malfunction in any one of the specified areas can degrade intended performance, but that levels of malfunction or combinations thereof must be considered by the vehicle designer in determining the point at which a failure indication is warranted. Consequently, the minimum reaction recommended by this document consists of making available a malfunction signal.

Standard

TON KILOMETER PER HOUR APPLICATION

1995-05-01

J1098_199505

This SAE Standard establishes the procedures for the application of Ton Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis. This document is applicable to only those tires used on earthmoving machines as defined in SAE J1057, and contains machines referenced in SAE J1116.

Standard

TON KILOMETER PER HOUR APPLICATION

1991-03-01

J1098_199103

This SAE Standard establishes the procedures for the application of Ton Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis. This document is applicable to only those tires used on earthmoving machines as defined in SAE J1057, and contains machines referenced in SAE J1116.

Standard

Steering Control Systems - Heavy Trucks

2021-11-09

J2425_202111

This SAE Recommended Practice describes a laboratory test procedure and requirements for evaluating the characteristics of heavy-truck steering control systems under simulated driver impact conditions, as well as driver entry/egress conditions. The test procedure employs a torso-shaped body block that is impacted against the steering wheel.