Search Results

Standard

METALLIC AIR BRAKE SYSTEM TUBING AND PIPE

1976-07-01

HISTORICAL

J1149_197607

This SAE standard covers minimum requirements for two types of metallic tubing and pipe as used in automotive air brake systems. It includes material and performance specifications, corrosion precautions, and installation recommendations. Copper tubing is designated Type 1, and galvanized steel pipe Type 2.

Standard

METALLIC AIR BRAKE SYSTEM TUBING AND PIPE

1987-12-01

HISTORICAL

J1149_198712

This specification covers minimum requirements for two types of metallic tubing and pipe as used in automotive air brake systems. It includes material and performance specifications, corrosion precautions, and installation recommendations. Copper tubing is designated Type 1, and galvanized steel pipe Type 2.

Standard

METRIC NONMETALLIC AIR BRAKE SYSTEM TUBING

1983-04-01

HISTORICAL

J1394_198304

Standard

Metric Nonmetallic Air Brake System Tubing1

2013-06-11

CURRENT

J1394_201306

This SAE Standard covers the minimum requirements for metric sizes of nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system that operates below -40 °C (-40 °F), above +93 °C (+200 °F), above a maximum working gage pressure of 1.0 MPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections that maintain a basically fixed relationship between components during vehicle operation.

Standard

Metric Nonmetallic Air Brake System Tubing1

2004-06-30

HISTORICAL

J1394_200406

This SAE Standard covers the minimum requirements for metric sizes of nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system that operates below −40 °C (−40 °F), above +93 °C (+200 °F), above a maximum working gage pressure of 1.0 MPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections that maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this standard and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections, which are used in the construction of such assemblies.2

Standard

METRIC NONMETALLIC AIR BRAKE SYSTEM TUBING

1989-05-01

HISTORICAL

J1394_198905

This standard covers the minimum requirements for metric sizes of nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system that operates below -40°C (-40°F), above +93°C (+200°F), above a maximum working gage pressure of 1.0 MPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections that maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this standard and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections, which are used in the construction of such assemblies.2

Standard

Cartridge Cavity

2023-06-02

CURRENT

J2494/4_202306

This SAE Standard covers complete general and dimensional data for the manufacture of, T6061-T6 Aluminum cavities designed to receive Push To Connect threadless fittings known as “cartridges“, for air brake applications. This document is not intended to specify or recommend any style or manufacture of such cartridges but to establish uniform cavity dimensions for interchangeability purposes.

Standard

NONMETALLIC AIR BRAKE SYSTEM TUBING

1976-07-01

HISTORICAL

J844D_197607

This standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems. Non-reinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system which operates below -40° F (-40° C), above +200° F (+93°C), above a maximum working gage pressure of 150 psi (1030 KPa), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this standard and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies.2

Standard

NONMETALLIC AIR BRAKE SYSTEM TUBING

1988-10-01

HISTORICAL

J844_198810

This standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems. Non-reinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system which operates below -40°F (-40°C), above +200°F (+93°C), above a maximum working gage pressure of 150 psi (1030 kPa), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this standard and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies.2

Standard

NONMETALLIC AIR BRAKE SYSTEM TUBING

1994-10-01

HISTORICAL

J844_199410

This SAE Standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system which operates below −40 °C (−40 °F), above +93 °C (+200 °F), above a maximum working gage pressure of 1030 kPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this document and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies2.

Standard

NONMETALLIC AIR BRAKE SYSTEM TUBING

1997-05-01

HISTORICAL

J844_199705

This SAE Standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system which operates below −40 °C (−40 °F), above +93 °C (+200 °F), above a maximum working gage pressure of 1030 kPa (150 psi), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this document and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies2.

Standard

NONMETALLIC AIR BRAKE SYSTEM TUBING

1990-06-01

HISTORICAL

J844_199006

This SAE Standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems. Nonreinforced products are designated type A and reinforced products type B. It is not intended to cover tubing for any portion of the system which operates below -40°C (-40°F), above +93°C (+200°F), above a maximum working gage pressure of 150 psi (1030 kPa), or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this document and SAE J1131 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies.2

Standard

Nonmetallic Air Brake System Tubing

2012-12-19

CURRENT

J844_201212

Standard

Nonmetallic Air Brake System Tubing

2004-11-04

HISTORICAL

J844_200411

This SAE Standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems. Non-reinforced products are designated type A and reinforced products, type B. It is not intended to cover tubing for any portion of the system which operates below −40 °C, above +93 °C, above a maximum working gage pressure of 1.0 MPa, or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections, which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this document, SAE J1131, and SAE J2494-3 to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies2.

Standard

Spherical and Flanged Sleeve (Compression) Tube Fittings

2022-01-12

CURRENT

J246_202201

This SAE Standard covers complete general and dimensional specifications for tube fittings of the spherical and flanged sleeve compression types for use in the piping of air brake systems on automotive vehicles. The spherical sleeve compression type Figures 1A to 5 and Tables 1 to 3 is intended for use with annealed copper alloy tubing per SAE J1149, Type 1. The flanged sleeve compression type Figures 6A to 11 and Tables 4 to 6 is intended for use with nylon tubing per SAE J844. It is not intended to restrict or preclude other designs of a tube fitting for use with SAE J844, air brake tubing. Performance requirements for SAE J844 are covered in SAE J1131. See SAE J1131 for the Performance Requirements of Reusable (Push to Connect) Fittings Intended for Use in Automotive Air Brake Systems.

Standard

SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS

1981-03-01

HISTORICAL

J246_198103

This standard covers complete general and dimensional specifications for tube fittings of the spherical and flanged sleeve compression types for use in the piping of air brake systems on automotive vehicles. The spherical sleeve compression type Figs. 1A-5 and Tables 3-5 is intended for use with annealed copper alloy tubing per SAE J1149 (July, 1976), Type 1. The flanged sleeve compression type Figs. 6A-11 and Tables 6-8 is intended for use with nylon tubing per SAE J844 (July, 1976). It is not intended to restrict or preclude other designs of a tube fitting for use with SAE J844 (July, 1976), air brake tubing. Performance requirements for SAE J844 (July, 1976), Nonmetallic Tubing and Fittings Assemblies, are covered in J1131 (January, 1976).

Standard

SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS

1977-01-01

HISTORICAL

J246D_197701

This standard covers complete general and dimensional specifications for tube fittings of the spherical and flanged sleeve compression types for use in the piping of air brake systems on automotive vehicles. The spherical sleeve compression type Figs. 1A-5 and Tables 3-5 is intended for use with annealed copper alloy tubing per SAE J844, Type 1. The flanged sleeve compression type Figs. 6A-11 and Tables 6-8 is intended for use with nylon tubing per SAE J844, Type 3. It is not intended to restrict or preclude other designs of a tube fitting for use with SAE J844, Type 3 air brake tubing.

Standard

SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS

1993-06-01

HISTORICAL

J246_199306

This SAE Standard covers complete general and dimensional specifications for tube fittings of the spherical and flanged sleeve compression types for use in the piping of air brake systems on automotive vehicles. The spherical sleeve compression type Figures 1A to 5 and Tables 1 to 3 is intended for use with annealed copper alloy tubing per SAE J1149, Type 1. The flanged sleeve compression type Figures 6A to 11 and Tables 4 to 6 is intended for use with nylon tubing per SAE J844. It is not intended to restrict or preclude other designs of a tube fitting for use with SAE J844, air brake tubing. Performance requirements for SAE J844 are covered in SAE J1131. See SAE J1131 for the Performance Requirements of Reusable (Push to Connect) Fittings Intended for Use in Automotive Air Brake Systems.

Standard

SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS

1992-06-01

HISTORICAL

J246_199206

This SAE Standard covers complete general and dimensional specifications for tube fittings of the spherical and flanged sleeve compression types for use in the piping of air brake systems on automotive vehicles. The spherical sleeve compression type Figures 1A to 5 and Tables 1 to 3 is intended for use with annealed copper alloy tubing per SAE J1149, Type 1. The flanged sleeve compression type Figures 6A to 11 and Tables 4 to 6 is intended for use with nylon tubing per SAE J844. It is not intended to restrict or preclude other designs of a tube fitting for use with SAE J844, air brake tubing. Performance requirements for SAE J844 are covered in J1131. See SAE J1131 for the Performance Requirements of Reusable (Push to Connect) Fittings Intended for Use in Automotive Air Brake Systems.

Standard

SPHERICAL AND FLANGED SLEEVE (COMPRESSION) TUBE FITTINGS

1991-04-01

HISTORICAL

J246_199104

This SAE Standard covers complete general and dimensional specifications for tube fittings of the spherical and flanged sleeve compression types for use in the piping of air brake systems on automotive vehicles. The spherical sleeve compression type Figures 1A to 5 and Tables 1 to 3 is intended for use with annealed copper alloy tubing per SAE J1149, Type 1. The flanged sleeve compression type Figures 6A to 11 and Tables 4 to 6 is intended for use with nylon tubing per SAE J844. It is not intended to restrict or preclude other designs of a tube fitting for use with SAE J844, air brake tubing. Performance requirements for SAE J844 are covered in J1131.