The scope of this SAE Aerospace Recommended Practice (ARP) is to establish the procedure for creating titles of aerospace tubing and clamp installation documents generated by SAE Subcommittee G-3E.
This SAE Aerospace Information Report (AIR) presents flexure fatigue strength of tube fitting joints in the form of graphs showing applied deflection D and total calculated axial stress S versus number of cycles to failure N. The graphs have been prepared from data obtained by actual testing conducted in accordance with ARP1185.
This information report presents flexure fatigue strength of tube fitting joints in the form of graphs showing applied deflection D and total calculated axial stress S vs. number of cycles to failure N. The graphs have been prepared from data obtained by actual testing conducted in accordance with ARP 1185.
This SAE Aerospace Information Report (AIR) presents flexure fatigue strength of tube fitting joints in the form of graphs showing applied deflection D and total calculated axial stress S versus number of cycles to failure N. The graphs have been prepared from data obtained by actual testing conducted in accordance with ARP1185.
This SAE Aerospace Standard provides the essential minimum design, installation and removal standard for MA2111, MA2112, MA2113, and MA2119 adapters, and is applicable when specified on engineering drawings or in procurement documents.
This SAE Aerospace Standard (AS) establishes the requirements for 24 degree cone AS5827 or EN 6123 flareless Ring locked fitting assemblies per AS5550 and AS5865, for use in aircraft fluid systems at nominal operating pressure of 5080 psi (35 000 kPa) maximum and operating temperature range of -65 to +275 °F (-54 to +135 °C). The general requirements shall be for, but not limited to, commercial aircraft hydraulic components per AS4941, using port configuration as specified in AS5551.
This specification covers the requirements for Aircraft Hydraulic, Self-Sealing, Quick Disconnect Couplings for use in 5000 and 8000 lbf/in2 (gage) lightweight hydraulic systems.
This specification covers the requirements for aircraft hydraulic, self-sealing, quick disconnect couplings for use in 5000 and 8000 lbf/in2 (gage) lightweight hydraulic systems.
This specification covers the requirements for aircraft hydraulic, self-sealing, quick disconnect couplings for use in 8000 lbf/in2 (gage) lightweight hydraulic systems.
This SAE Aerospace Standard describes the test methods for flexible PTFE hose and hose assemblies used in aircraft fluid systems in the pressure and temperature ranges defined in MA2001 (ISO 6771). It applies to the hose and the hose coupling. The tests and assembly requirements for the connecting end fitting are covered in the procurement specification. This document applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Appendix A.
This standard describes the test methods for flexible TFE hose and hose assemblies used in aircraft fluid systems in the pressure and temperature ranges covered by pressure classes B, D and E, and temperature types I, II and III of MA 2001 - ISO 6771. It applies to the hose and the hose coupling. The tests and assembly requirements for the connecting end fitting are covered in the procurement specification. This standard applies each time that it is referred to in a procurement specification or other definition document. Fluids and materials used for the tests are listed in Appendix A.