Refine Your Search

Date

Date

Topic

Topic

Fire suppression AGE-2 Air Cargo Commercial aircraft Energy storage systems Interiors, Cabins, and Cockpits

Search Results

Viewing 1 to 20 of 28
12Next >Last >>
Sort by relevance
Standard

Aircraft Cargo Door Opening/Sill Details for Ground Support Equipment Interface
2020-11-23
CURRENT
AIR1673B
Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This SAE Aerospace Information Report (AIR) has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.
Standard

Fire Containment Cover - Operation and Use
2020-04-23
CURRENT
ARP6905
This SAE Aerospace Recommended Practice (ARP) provides guidelines for the effective operation and use of fire containment covers (FCCs). Technical Standard Orders (TSOs) C203 and C90e (and later revisions) incorporate AS6453, and provide the Minimum Performance Standards (MPS) for an FCC design. The net and pallet used with the FCC must be approved using the updated net and flammability requirements in TSO C90e and later revisions. However, fire containment performance also requires this equipment is properly used. Fire safety is compromised when FCCs are used in an inadequate manner.
Standard

INSULATED AIR CARGO CONTAINER
1992-12-01
HISTORICAL
ARP1523
Perishable cargoes, e.g., dairy produce, fruit, vegetables, flowers, frozen foods, meat, fish, etc., require maintenance of specific temperature ranges during air related door-to-door transportation.
Standard

INSULATED AIR CARGO CONTAINER
1995-07-01
HISTORICAL
ARP1523A
The purpose of this document is to establish minimum operational requirements that will ensure that perishable cargoes in insulated standard airborne containers can be kept in prime condition during the ground handling and air transportation cycle within a maximum time span of 48 h.
Standard

Cargo Restraint on Aircraft Passenger Seats – Main Passenger Cabin
2011-12-12
CURRENT
ARP4049A
This SAE Aerospace Recommended Practice (ARP) establishes the basic recommendations for the following two types of configuration for securing cargo to aircraft passenger seats on transport category aircraft: It is emphasized that the two types of restraint shown are merely examples of methods currently used and does not imply that alternative methods are not acceptable. For the purposes of this document, the minimum essential criteria are identified by the use of the key word "shall," Recommended criteria are identified by the use of the key word "should," and while not mandatory are considered to be of significant importance in providing safe, economical, and practical means of cargo restraint. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternative methods to be satisfactory.
Standard

CARGO RESTRAINT ON AIRCRAFT PASSENGER SEATS - MAIN PASSENGER CABIN
2008-06-22
HISTORICAL
ARP4049
This SAE Aerospace Recommended Practice (ARP) establishes the basic recommendations for the following two types of configuration for securing cargo to aircraft passenger seats on transport category aircraft: It is emphasized that the two types of restraint shown are merely examples of methods currently used and does not imply that alternative methods are not acceptable. For the purposes of this document, the minimum essential criteria are identified by the use of the key word "shall." Recommended criteria are identified by the use of the key word "should," and while not mandatory are considered to be of significant importance in providing safe, economical, and practical means of cargo restraint. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternative methods to be satisfactory.
Standard

Cargo Stopper Devices
2022-10-13
CURRENT
AS6554A
The purpose of this SAE Aerospace Standard (AS) is to standardize the basic design, performance, and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved restraint straps meeting AS5385C (TSO C-172) requirements.
Standard

Interline Air Cargo Pallet Nets
2023-01-13
CURRENT
AS1492C
This document establishes dimensional, structural, and environmental requirements for Type II/2 interline pallet nets. Type II/2 covers NAS3610/AS36100 code sizes.
Standard

Interline Air Cargo Pallets
2023-01-13
CURRENT
AS1491B
This SAE Aerospace Standard specifies the dimensional, design criteria, fabrication, performance, operational, environmental, and testing requirements for interline pallets requiring airworthiness approval for loading onto civil transport aircraft equipped with NAS3610/AS36100 restraint systems and using pallet nets meeting the requirements of AS1492. Type II/2 covers NAS3610/AS36100 code sizes. Type III pallets have been removed from this SAE Aerospace Standard revision.
Standard

Vehicle Transport Unit Load Device (ULD)
2020-11-30
CURRENT
ARP1554D
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service. It is intended that tests shall be non-destructive in nature and not result in damage unless ultimate load conditions are employed. Test equipment and methods of testing described are not meant to be restrictive. Alternate equivalent methods to accomplish the desired results may be employed. In selected cases, tests may be repeated under ultimate load conditions when required for substantiation of analytical data. If this becomes necessary, the parts deformed may be removed and replaced prior to the retest.
Standard

Auto Transport Unit Load Device
2008-06-22
HISTORICAL
ARP1554C
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
Standard

Universal Leak Detector
2005-10-28
CURRENT
ARP726A
This recommended practice covers a self-contained detection system which is capable of pressurizing a closed system up to 70 psig with halogen (tracer) gas and up to 3500 psig with nitrogen.
Standard

Drum, Metal-Shipping and Storage
2017-11-03
CURRENT
AS6054
This specification covers new cylindrical drums to be used as exterior shipping containers (see 6.1).
Standard

Fire Containment Cover - Design, Performance, and Testing Requirements
2021-12-13
CURRENT
AS6453A
This SAE Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
Standard

Fire Containment Cover - Design, Performance, and Testing Requirements
2013-08-06
HISTORICAL
AS6453
This SAE Aerospace Standard (AS), identical to ISO 14186, specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a in those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b on a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
12Next >Last >>
X