Standard
Aluminum Sheet, Laminated Edge Bonded
2014-07-28
CURRENT
AMS4012G
This specification covers an aluminum or aluminum alloy in the form of sheet, laminated and edge bonded.
Search Results
Standard
SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS Determination of
1981-07-01
HISTORICAL
ARP1704
This method covers the determination of the fracture toughness of metallic materials (KSR or KSB) by testing slotted short-rod or short-bar specimens.
Standard
Magnesium Alloy Castings, Heat Treatment of
1998-02-01
HISTORICAL
AMSM6857
This specification covers the requirements for the heat treatment of magnesium alloy castings. This specification covers furnace equipment requirements, and general information for heat treating procedures and heat treating temperatures for magnesium alloys.
Standard
Ingot, Zinc Alloy (For Sheet Metal Forming Dies)
2011-10-24
HISTORICAL
AMSI7068B
This specification addresses requirements for a zinc alloy used in the production of sand cast forming dies for sheet metal stamping operations.
Standard
Aluminum Alloy 7178, Plate and Sheet
2014-02-14
CURRENT
AMSQQA250/14B
This specification covers the specific requirements for 7178 aluminum alloy plate and sheet material; the general requirements are covered in AMS-QQ-A-250.
Standard
Tube, Aluminum, Alloy, Drawn, Seamless, 3003
2001-07-01
HISTORICAL
AMSWWT700/2
This specification covers the specific requirements for seamless tube drawn from aluminum alloy 3003.
Standard
Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality
1999-01-01
HISTORICAL
AMST7081
This specification covers 6061 aluminum alloy, round, drawn, seamless tube having outside diameters of 3/16 inch through 1-1/2 inches.
Standard
ANGLE - BULB SECTION EXTRUDED
1998-02-01
HISTORICAL
AMS10135
Standard
ANGLE - BULB SECTION EXTRUDED
2005-10-11
HISTORICAL
AMS10135A
Standard
Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range
2009-06-10
HISTORICAL
AMS4768H
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
Standard
SILVER ALLOY BRAZING FILLER METAL 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range
1992-04-01
HISTORICAL
AMS4768G
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
Standard
Silver Alloy, Brazing Filler Metal 35Ag - 26Cu - 21Zn - 18Cd 1125 to 1295 °F (607 to 702 °C) Solidus-Liquidus Range
2015-12-08
CURRENT
AMS4768J
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
Standard
Aluminum Alloy, Foil 2.5Mg - 0.25Cr (5052-H191) Strain Hardened
2015-12-03
CURRENT
AMS4004E
This specification covers an aluminum alloy in the form of foil.
Standard
Aluminum Alloy, Foil 2.5Mg - 0.25Cr (5052-H191) Strain Hardened
2009-10-23
HISTORICAL
AMS4004D
This specification covers an aluminum alloy in the form of foil.
Standard
Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled
2000-08-01
HISTORICAL
AMS4241A
This specification covers an aluminum alloy in the form of castings.
Standard
ALUMINUM ALLOY CASTINGS, SAND COMPOSITE 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged Aircraft Structural Quality
1986-07-01
HISTORICAL
AMS4242
This specification covers an aluminum alloy in the form of sand composite molded castings.
Standard
Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled
2007-04-24
HISTORICAL
AMS4241C
This specification covers an aluminum alloy in the form of castings.
Standard
Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled
2021-03-23
WIP
AMS4241F
This specification covers an aluminum alloy in the form of castings.
Standard
Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled
2009-11-24
HISTORICAL
AMS4241D
This specification covers an aluminum alloy in the form of castings.
Standard
Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated Dendrite Arm Spacing (DAS) Controlled
2015-12-04
CURRENT
AMS4241E
This specification covers an aluminum alloy in the form of castings.
